All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kieran Bingham <kieran@bingham.xyz>
To: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	"open list:MEDIA DRIVERS FOR RENESAS - FDP1"
	<linux-media@vger.kernel.org>,
	"open list:MEDIA DRIVERS FOR RENESAS - FDP1"
	<linux-renesas-soc@vger.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 3/3] dt-bindings: Add Renesas R-Car FDP1 bindings
Date: Mon, 13 Jun 2016 12:31:53 +0100	[thread overview]
Message-ID: <575E99A9.2050806@bingham.xyz> (raw)
In-Reply-To: <20160610174057.GA21480@rob-hp-laptop>

On 10/06/16 18:40, Rob Herring wrote:
> On Thu, Jun 09, 2016 at 02:41:34PM +0100, Kieran Bingham wrote:
>> The FDP1 is a de-interlacing module which converts interlaced video to
>> progressive video. It is also capable of performing pixel format conversion
>> between YCbCr/YUV formats and RGB formats.
>>
>> Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
>> ---
>>  .../devicetree/bindings/media/renesas,fdp1.txt     | 34 ++++++++++++++++++++++
>>  1 file changed, 34 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/renesas,fdp1.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.txt b/Documentation/devicetree/bindings/media/renesas,fdp1.txt
>> new file mode 100644
>> index 000000000000..e2da2aec5e9f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/renesas,fdp1.txt
>> @@ -0,0 +1,34 @@
>> +Renesas R-Car Fine Display Processor (FDP1)
>> +-----------------------------------------------
>> +
>> +The FDP1 is a de-interlacing module which converts interlaced video to
>> +progressive video. It is capable of performing pixel format conversion between
>> +YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are supported as
>> +an input to the module.
>> +
>> + - compatible: Must be one or more of the following
>> +
>> +   - "renesas,r8a7795-fdp1" for R8A7795 (R-Car H3)
>> +   - "renesas,r8a7796-fdp1" for R8A7796 (R-Car M3-W)
>> +   - "renesas,fdp1" for generic compatible
>> +
>> +   When compatible with the generic version, nodes must list the
>> +   SoC-specific version corresponding to the platform first, followed by the
>> +   family-specific and/or generic versions.
>> +
>> + - reg: the register base and size for the device registers
>> + - clocks: Reference to the functional clock
>> + - renesas,fcp: Reference to the FCPF connected to the FDP1
>> +
>> +
>> +Device node example
>> +-------------------
>> +
>> +	fdp1ch1: fdp1@fe940000 {
>> +		compatible = "renesas,r8a7795-fdp1", "renesas,fdp1";
>> +		reg = <0 0xfe940000 0 0x2400>;
>> +		interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
>> +		clocks = <&cpg CPG_MOD 119>;
>> +		power-domains = <&sysc R8A7795_PD_A3VP>;
> 
> Not documented.

I'll mirror whatever the consensus is on this topic from the other patch
here.

> 
>> +		renesas,fcp = <&fcpf0>;
>> +	};
>> \ No newline at end of file
> 
> Fix this.

Ok

>> -- 
>> 2.7.4
>>

-- 
Regards

Kieran Bingham

WARNING: multiple messages have this Message-ID (diff)
From: Kieran Bingham <kieran@ksquared.org.uk>
To: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	"open list:MEDIA DRIVERS FOR RENESAS - FDP1"
	<linux-media@vger.kernel.org>,
	"open list:MEDIA DRIVERS FOR RENESAS - FDP1"
	<linux-renesas-soc@vger.kernel.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
	<devicetree@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 3/3] dt-bindings: Add Renesas R-Car FDP1 bindings
Date: Mon, 13 Jun 2016 12:31:53 +0100	[thread overview]
Message-ID: <575E99A9.2050806@bingham.xyz> (raw)
In-Reply-To: <20160610174057.GA21480@rob-hp-laptop>

On 10/06/16 18:40, Rob Herring wrote:
> On Thu, Jun 09, 2016 at 02:41:34PM +0100, Kieran Bingham wrote:
>> The FDP1 is a de-interlacing module which converts interlaced video to
>> progressive video. It is also capable of performing pixel format conversion
>> between YCbCr/YUV formats and RGB formats.
>>
>> Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
>> ---
>>  .../devicetree/bindings/media/renesas,fdp1.txt     | 34 ++++++++++++++++++++++
>>  1 file changed, 34 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/renesas,fdp1.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/renesas,fdp1.txt b/Documentation/devicetree/bindings/media/renesas,fdp1.txt
>> new file mode 100644
>> index 000000000000..e2da2aec5e9f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/renesas,fdp1.txt
>> @@ -0,0 +1,34 @@
>> +Renesas R-Car Fine Display Processor (FDP1)
>> +-----------------------------------------------
>> +
>> +The FDP1 is a de-interlacing module which converts interlaced video to
>> +progressive video. It is capable of performing pixel format conversion between
>> +YCbCr/YUV formats and RGB formats. Only YCbCr/YUV formats are supported as
>> +an input to the module.
>> +
>> + - compatible: Must be one or more of the following
>> +
>> +   - "renesas,r8a7795-fdp1" for R8A7795 (R-Car H3)
>> +   - "renesas,r8a7796-fdp1" for R8A7796 (R-Car M3-W)
>> +   - "renesas,fdp1" for generic compatible
>> +
>> +   When compatible with the generic version, nodes must list the
>> +   SoC-specific version corresponding to the platform first, followed by the
>> +   family-specific and/or generic versions.
>> +
>> + - reg: the register base and size for the device registers
>> + - clocks: Reference to the functional clock
>> + - renesas,fcp: Reference to the FCPF connected to the FDP1
>> +
>> +
>> +Device node example
>> +-------------------
>> +
>> +	fdp1ch1: fdp1@fe940000 {
>> +		compatible = "renesas,r8a7795-fdp1", "renesas,fdp1";
>> +		reg = <0 0xfe940000 0 0x2400>;
>> +		interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
>> +		clocks = <&cpg CPG_MOD 119>;
>> +		power-domains = <&sysc R8A7795_PD_A3VP>;
> 
> Not documented.

I'll mirror whatever the consensus is on this topic from the other patch
here.

> 
>> +		renesas,fcp = <&fcpf0>;
>> +	};
>> \ No newline at end of file
> 
> Fix this.

Ok

>> -- 
>> 2.7.4
>>

-- 
Regards

Kieran Bingham

  reply	other threads:[~2016-06-13 11:31 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1465479695-18644-1-git-send-email-kieran@bingham.xyz>
2016-06-09 13:41 ` [PATCH 1/3] dt-bindings: Update Renesas R-Car FCP DT binding Kieran Bingham
2016-06-09 13:41   ` Kieran Bingham
2016-06-09 13:41   ` Kieran Bingham
2016-06-10 17:37   ` Rob Herring
2016-06-10 17:37     ` Rob Herring
2016-06-13 11:28     ` Kieran Bingham
2016-06-13 11:28       ` Kieran Bingham
2016-06-13 12:17   ` Laurent Pinchart
2016-06-13 12:17     ` Laurent Pinchart
2016-06-13 12:17     ` Laurent Pinchart
2016-06-09 13:41 ` [PATCH 2/3] dt-bindings: Document Renesas R-Car FCP power-domains usage Kieran Bingham
2016-06-09 13:41   ` Kieran Bingham
2016-06-09 13:41   ` Kieran Bingham
2016-06-10 17:39   ` Rob Herring
2016-06-10 17:39     ` Rob Herring
2016-06-10 17:39     ` Rob Herring
2016-06-10 19:11     ` Geert Uytterhoeven
2016-06-10 21:33       ` Rob Herring
2016-06-12  8:46         ` Geert Uytterhoeven
2016-06-09 13:41 ` [PATCH 3/3] dt-bindings: Add Renesas R-Car FDP1 bindings Kieran Bingham
2016-06-09 13:41   ` Kieran Bingham
2016-06-09 13:41   ` Kieran Bingham
2016-06-10 17:40   ` Rob Herring
2016-06-10 17:40     ` Rob Herring
2016-06-13 11:31     ` Kieran Bingham [this message]
2016-06-13 11:31       ` Kieran Bingham

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=575E99A9.2050806@bingham.xyz \
    --to=kieran@bingham.xyz \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.