* [PATCH 0/2] ARM: dts: NSP: add PL330 support and XMC board @ 2016-06-07 22:28 ` Jon Mason 0 siblings, 0 replies; 10+ messages in thread From: Jon Mason @ 2016-06-07 22:28 UTC (permalink / raw) To: linux-arm-kernel Add support for the PL330 DMA engine and the XMC form factor for Broadcom Northstar Plus SoCs Jon Mason (2): ARM: dts: NSP: Add XMC board support ARM: dts: NSP: Add PL330 support arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm-nsp.dtsi | 17 ++++++ arch/arm/boot/dts/bcm958525xmc.dts | 109 +++++++++++++++++++++++++++++++++++++ 3 files changed, 127 insertions(+) create mode 100644 arch/arm/boot/dts/bcm958525xmc.dts -- 1.9.1 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: add PL330 support and XMC board @ 2016-06-07 22:28 ` Jon Mason 0 siblings, 0 replies; 10+ messages in thread From: Jon Mason @ 2016-06-07 22:28 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel Add support for the PL330 DMA engine and the XMC form factor for Broadcom Northstar Plus SoCs Jon Mason (2): ARM: dts: NSP: Add XMC board support ARM: dts: NSP: Add PL330 support arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm-nsp.dtsi | 17 ++++++ arch/arm/boot/dts/bcm958525xmc.dts | 109 +++++++++++++++++++++++++++++++++++++ 3 files changed, 127 insertions(+) create mode 100644 arch/arm/boot/dts/bcm958525xmc.dts -- 1.9.1 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: add PL330 support and XMC board @ 2016-06-07 22:28 ` Jon Mason 0 siblings, 0 replies; 10+ messages in thread From: Jon Mason @ 2016-06-07 22:28 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, linux-kernel-u79uwXL29TY76Z2rM5mHXA Add support for the PL330 DMA engine and the XMC form factor for Broadcom Northstar Plus SoCs Jon Mason (2): ARM: dts: NSP: Add XMC board support ARM: dts: NSP: Add PL330 support arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm-nsp.dtsi | 17 ++++++ arch/arm/boot/dts/bcm958525xmc.dts | 109 +++++++++++++++++++++++++++++++++++++ 3 files changed, 127 insertions(+) create mode 100644 arch/arm/boot/dts/bcm958525xmc.dts -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/2] ARM: dts: NSP: Add XMC board support 2016-06-07 22:28 ` Jon Mason @ 2016-06-07 22:28 ` Jon Mason -1 siblings, 0 replies; 10+ messages in thread From: Jon Mason @ 2016-06-07 22:28 UTC (permalink / raw) To: linux-arm-kernel From: Jon Mason <jonmason@broadcom.com> The BCM958525XMC board is a smaller form factor typically used as controller boards for switches. This smaller board has less devices pinned out, so only a few need be populated in the device tree. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm958525xmc.dts | 109 +++++++++++++++++++++++++++++++++++++ 2 files changed, 110 insertions(+) create mode 100644 arch/arm/boot/dts/bcm958525xmc.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2afa97e..3626be8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -97,6 +97,7 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ bcm21664-garnet.dtb dtb-$(CONFIG_ARCH_BCM_NSP) += \ + bcm958525xmc.dtb \ bcm958625hr.dtb \ bcm958625k.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts new file mode 100644 index 0000000..d257e83 --- /dev/null +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -0,0 +1,109 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus XMC (BCM958525xmc)"; + compatible = "brcm,bcm58525", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&nand { + nandcs at 0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition at 0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition at 200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition at 600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition at 1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition at 4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +/* XHCI, SATA, MMC, and Ethernet support needed to be complete */ + +&uart0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 1/2] ARM: dts: NSP: Add XMC board support @ 2016-06-07 22:28 ` Jon Mason 0 siblings, 0 replies; 10+ messages in thread From: Jon Mason @ 2016-06-07 22:28 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Jon Mason From: Jon Mason <jonmason@broadcom.com> The BCM958525XMC board is a smaller form factor typically used as controller boards for switches. This smaller board has less devices pinned out, so only a few need be populated in the device tree. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm958525xmc.dts | 109 +++++++++++++++++++++++++++++++++++++ 2 files changed, 110 insertions(+) create mode 100644 arch/arm/boot/dts/bcm958525xmc.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2afa97e..3626be8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -97,6 +97,7 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ bcm21664-garnet.dtb dtb-$(CONFIG_ARCH_BCM_NSP) += \ + bcm958525xmc.dtb \ bcm958625hr.dtb \ bcm958625k.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts new file mode 100644 index 0000000..d257e83 --- /dev/null +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -0,0 +1,109 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus XMC (BCM958525xmc)"; + compatible = "brcm,bcm58525", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +/* XHCI, SATA, MMC, and Ethernet support needed to be complete */ + +&uart0 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: dts: NSP: Add PL330 support @ 2016-06-07 22:28 ` Jon Mason 0 siblings, 0 replies; 10+ messages in thread From: Jon Mason @ 2016-06-07 22:28 UTC (permalink / raw) To: linux-arm-kernel From: Jon Mason <jonmason@broadcom.com> Add PL330 support to the the Broadcom Northstar Plus device tree. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 1759e65..8d7b35a 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -192,6 +192,23 @@ status = "disabled"; }; + dma at 20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + nand: nand at 26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: dts: NSP: Add PL330 support @ 2016-06-07 22:28 ` Jon Mason 0 siblings, 0 replies; 10+ messages in thread From: Jon Mason @ 2016-06-07 22:28 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel, Jon Mason From: Jon Mason <jonmason@broadcom.com> Add PL330 support to the the Broadcom Northstar Plus device tree. Signed-off-by: Jon Mason <jonmason@broadcom.com> --- arch/arm/boot/dts/bcm-nsp.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 1759e65..8d7b35a 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -192,6 +192,23 @@ status = "disabled"; }; + dma@20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, -- 1.9.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] ARM: dts: NSP: Add PL330 support @ 2016-06-07 22:28 ` Jon Mason 0 siblings, 0 replies; 10+ messages in thread From: Jon Mason @ 2016-06-07 22:28 UTC (permalink / raw) To: Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w, linux-kernel-u79uwXL29TY76Z2rM5mHXA, Jon Mason From: Jon Mason <jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> Add PL330 support to the the Broadcom Northstar Plus device tree. Signed-off-by: Jon Mason <jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> --- arch/arm/boot/dts/bcm-nsp.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 1759e65..8d7b35a 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -192,6 +192,23 @@ status = "disabled"; }; + dma@20000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x20000 0x1000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&iprocslow>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 0/2] ARM: dts: NSP: add PL330 support and XMC board 2016-06-07 22:28 ` Jon Mason @ 2016-06-13 19:46 ` Florian Fainelli -1 siblings, 0 replies; 10+ messages in thread From: Florian Fainelli @ 2016-06-13 19:46 UTC (permalink / raw) To: linux-arm-kernel On 06/07/2016 03:28 PM, Jon Mason wrote: > Add support for the PL330 DMA engine and the XMC form factor for > Broadcom Northstar Plus SoCs > > > Jon Mason (2): > ARM: dts: NSP: Add XMC board support > ARM: dts: NSP: Add PL330 support Series applied, thanks Jon -- Florian ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 0/2] ARM: dts: NSP: add PL330 support and XMC board @ 2016-06-13 19:46 ` Florian Fainelli 0 siblings, 0 replies; 10+ messages in thread From: Florian Fainelli @ 2016-06-13 19:46 UTC (permalink / raw) To: Jon Mason, Rob Herring, Pawel Moll, Mark Rutland, Ian Campbell, Kumar Gala, Russell King Cc: devicetree, linux-arm-kernel, bcm-kernel-feedback-list, linux-kernel On 06/07/2016 03:28 PM, Jon Mason wrote: > Add support for the PL330 DMA engine and the XMC form factor for > Broadcom Northstar Plus SoCs > > > Jon Mason (2): > ARM: dts: NSP: Add XMC board support > ARM: dts: NSP: Add PL330 support Series applied, thanks Jon -- Florian ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2016-06-13 19:46 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-06-07 22:28 [PATCH 0/2] ARM: dts: NSP: add PL330 support and XMC board Jon Mason 2016-06-07 22:28 ` Jon Mason 2016-06-07 22:28 ` Jon Mason 2016-06-07 22:28 ` [PATCH 1/2] ARM: dts: NSP: Add XMC board support Jon Mason 2016-06-07 22:28 ` Jon Mason 2016-06-07 22:28 ` [PATCH 2/2] ARM: dts: NSP: Add PL330 support Jon Mason 2016-06-07 22:28 ` Jon Mason 2016-06-07 22:28 ` Jon Mason 2016-06-13 19:46 ` [PATCH 0/2] ARM: dts: NSP: add PL330 support and XMC board Florian Fainelli 2016-06-13 19:46 ` Florian Fainelli
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.