From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Laxman Dewangan <ldewangan@nvidia.com>,
javier@osg.samsung.com, mturquette@baylibre.com,
robh+dt@kernel.org, linux@armlinux.org.uk
Cc: linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
Javier Martinez Canillas <javier@dowhile0.org>
Subject: Re: [PATCH V2 1/4] clk: max77686: Combine Maxim max77686 and max77802 driver
Date: Fri, 17 Jun 2016 08:01:57 +0200 [thread overview]
Message-ID: <57639255.3010403@samsung.com> (raw)
In-Reply-To: <1466083407-28793-2-git-send-email-ldewangan@nvidia.com>
On 06/16/2016 03:23 PM, Laxman Dewangan wrote:
> The clock IP used on the Maxim PMICs max77686 and max77802 are
> same. The configuration of clock register is also same except
> the number of clocks.
>
> Part of common code utilisation, there is 3 files for these chips
> clock driver, one for common and two files for driver registration.
>
> Combine both drivers into single file and move common code into
> same common file reduces the 2 files and make max77686 and max77802
> clock driver in single fine. This driver does not depends on the
> parent driver structure. The regmap handle is acquired through
> regmap APIs for the register access.
>
> This combination of driver helps on adding clock driver for different
> Maxim PMICs which has similar clock IP like MAX77620 and MAX20024.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> CC: Javier Martinez Canillas <javier@dowhile0.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> ---
> Changes from V1:
> - Collected RB and TB from Javier.
> - Change the max_gen to max77686.
> - Rename structure and avoid duplication for reg and mask.
> - Taken care of comment from Krzysztof on coding.
> ---
> drivers/clk/Kconfig | 15 +--
> drivers/clk/Makefile | 2 -
> drivers/clk/clk-max-gen.c | 194 -----------------------------------
> drivers/clk/clk-max-gen.h | 32 ------
> drivers/clk/clk-max77686.c | 244 ++++++++++++++++++++++++++++++++++++++++++---
> drivers/clk/clk-max77802.c | 96 ------------------
> 6 files changed, 234 insertions(+), 349 deletions(-)
> delete mode 100644 drivers/clk/clk-max-gen.c
> delete mode 100644 drivers/clk/clk-max-gen.h
> delete mode 100644 drivers/clk/clk-max77802.c
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
WARNING: multiple messages have this Message-ID (diff)
From: k.kozlowski@samsung.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 1/4] clk: max77686: Combine Maxim max77686 and max77802 driver
Date: Fri, 17 Jun 2016 08:01:57 +0200 [thread overview]
Message-ID: <57639255.3010403@samsung.com> (raw)
In-Reply-To: <1466083407-28793-2-git-send-email-ldewangan@nvidia.com>
On 06/16/2016 03:23 PM, Laxman Dewangan wrote:
> The clock IP used on the Maxim PMICs max77686 and max77802 are
> same. The configuration of clock register is also same except
> the number of clocks.
>
> Part of common code utilisation, there is 3 files for these chips
> clock driver, one for common and two files for driver registration.
>
> Combine both drivers into single file and move common code into
> same common file reduces the 2 files and make max77686 and max77802
> clock driver in single fine. This driver does not depends on the
> parent driver structure. The regmap handle is acquired through
> regmap APIs for the register access.
>
> This combination of driver helps on adding clock driver for different
> Maxim PMICs which has similar clock IP like MAX77620 and MAX20024.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> CC: Javier Martinez Canillas <javier@dowhile0.org>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>
> ---
> Changes from V1:
> - Collected RB and TB from Javier.
> - Change the max_gen to max77686.
> - Rename structure and avoid duplication for reg and mask.
> - Taken care of comment from Krzysztof on coding.
> ---
> drivers/clk/Kconfig | 15 +--
> drivers/clk/Makefile | 2 -
> drivers/clk/clk-max-gen.c | 194 -----------------------------------
> drivers/clk/clk-max-gen.h | 32 ------
> drivers/clk/clk-max77686.c | 244 ++++++++++++++++++++++++++++++++++++++++++---
> drivers/clk/clk-max77802.c | 96 ------------------
> 6 files changed, 234 insertions(+), 349 deletions(-)
> delete mode 100644 drivers/clk/clk-max-gen.c
> delete mode 100644 drivers/clk/clk-max-gen.h
> delete mode 100644 drivers/clk/clk-max77802.c
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
next prev parent reply other threads:[~2016-06-17 6:01 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-16 13:23 [PATCH V2 0/4] clk: Combine MAX77686 and MAX77802 driver and extend for MAX77620 Laxman Dewangan
2016-06-16 13:23 ` Laxman Dewangan
2016-06-16 13:23 ` Laxman Dewangan
2016-06-16 13:23 ` [PATCH V2 1/4] clk: max77686: Combine Maxim max77686 and max77802 driver Laxman Dewangan
2016-06-16 13:23 ` Laxman Dewangan
2016-06-16 13:23 ` Laxman Dewangan
2016-06-17 6:01 ` Krzysztof Kozlowski [this message]
2016-06-17 6:01 ` Krzysztof Kozlowski
2016-06-16 13:23 ` [PATCH V2 2/4] clk: Combine DT binding doc for max77686 and max77802 Laxman Dewangan
2016-06-16 13:23 ` Laxman Dewangan
2016-06-16 13:23 ` Laxman Dewangan
2016-06-16 13:57 ` Javier Martinez Canillas
2016-06-16 13:57 ` Javier Martinez Canillas
2016-06-17 5:58 ` Krzysztof Kozlowski
2016-06-17 5:58 ` Krzysztof Kozlowski
2016-06-16 13:23 ` [PATCH V2 3/4] clk: max77686: Add DT binding details for PMIC MAX77620 Laxman Dewangan
2016-06-16 13:23 ` Laxman Dewangan
2016-06-16 13:23 ` Laxman Dewangan
2016-06-16 14:02 ` Javier Martinez Canillas
2016-06-16 14:02 ` Javier Martinez Canillas
2016-06-16 14:02 ` Javier Martinez Canillas
2016-06-17 5:59 ` Krzysztof Kozlowski
2016-06-17 5:59 ` Krzysztof Kozlowski
2016-06-16 13:23 ` [PATCH V2 4/4] clk: max77686: Add support for MAX77620 clocks Laxman Dewangan
2016-06-16 13:23 ` Laxman Dewangan
2016-06-16 13:23 ` Laxman Dewangan
2016-06-16 14:07 ` Javier Martinez Canillas
2016-06-16 14:07 ` Javier Martinez Canillas
2016-06-17 6:03 ` Krzysztof Kozlowski
2016-06-17 6:03 ` Krzysztof Kozlowski
2016-06-17 5:53 ` Laxman Dewangan
2016-06-17 5:53 ` Laxman Dewangan
2016-06-17 5:53 ` Laxman Dewangan
2016-06-17 6:12 ` Krzysztof Kozlowski
2016-06-17 6:12 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57639255.3010403@samsung.com \
--to=k.kozlowski@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=javier@dowhile0.org \
--cc=javier@osg.samsung.com \
--cc=ldewangan@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.