From: Caesar Wang <caesar.upstream@gmail.com>
To: Douglas Anderson <dianders@chromium.org>,
Mark Brown <broonie@kernel.org>
Cc: boris.brezillon@free-electrons.com,
Heiko Stuebner <heiko@sntech.de>,
linux-kernel@vger.kernel.org, briannorris@chromium.org,
lgirdwood@gmail.com, linux-rockchip@lists.infradead.org,
lee.jones@linaro.org
Subject: Re: [PATCH] regulator: pwm: Fix regulator ramp delay for continuous mode
Date: Tue, 28 Jun 2016 18:32:24 +0800 [thread overview]
Message-ID: <57725238.9010809@gmail.com> (raw)
In-Reply-To: <1467089591-7631-1-git-send-email-dianders@chromium.org>
On 2016年06月28日 12:53, Douglas Anderson wrote:
> The original commit adding support for continuous voltage mode didn't
> handle the regulator ramp delay properly. It treated the delay as a
> fixed delay in uS despite the property being defined as uV / uS. Let's
> adjust it. Luckily there appear to be no users of this ramp delay for
> PWM regulators (as per grepping through device trees in linuxnext).
>
> Note also that the upper bound of usleep_range probably shouldn't be a
> full 1 ms longer than the lower bound since I've seen plenty of hardware
> with a ramp rate of ~5000 uS / uV and for small jumps the total delays
> are in the tens of uS. 1000 is way too much. We'll try to be dynamic
> and use 10%
I'm agree with the dynamic and use 10%.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Caesar Wang <wxt@rock-chips.com>
Tested for my rk3399 board. That's still happy work for my board.
..
[ 2891.541958] pwm_regulator_set_voltage: delay=38, min-v=800000,
old-v=1024000
[ 2898.188785] pwm_regulator_set_voltage: delay=13, min-v=875000,
old-v=800000
[ 2898.211873] pwm_regulator_set_voltage: delay=8, min-v=925000,
old-v=877000
[ 2898.312026] pwm_regulator_set_voltage: delay=21, min-v=-800000,
old-v=926000
..
> ---
> Note that this patch is atop Boris's recent PWM regulator fixes. If
> desired it wouldn't be too hard to write it atop the old code, though
> quite honestly anyone using a PWM regulator should probably be using his
> new code.
>
> drivers/regulator/pwm-regulator.c | 9 +++++++--
> 1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
> index fa1c74c77bb0..de94d19f6e1f 100644
> --- a/drivers/regulator/pwm-regulator.c
> +++ b/drivers/regulator/pwm-regulator.c
> @@ -188,6 +188,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
> struct pwm_state pstate;
> unsigned int diff_duty;
> unsigned int dutycycle;
> + int old_uV = pwm_regulator_get_voltage(rdev);
> int ret;
>
> pwm_init_state(drvdata->pwm, &pstate);
> @@ -219,8 +220,12 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
> return ret;
> }
>
> - /* Delay required by PWM regulator to settle to the new voltage */
> - usleep_range(ramp_delay, ramp_delay + 1000);
> + if (ramp_delay == 0)
> + return 0;
> +
> + /* Ramp delay is in uV/uS. Adjust to uS and delay */
> + ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay);
> + usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10));
>
> return 0;
> }
next prev parent reply other threads:[~2016-06-28 10:32 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-28 4:53 [PATCH] regulator: pwm: Fix regulator ramp delay for continuous mode Douglas Anderson
2016-06-28 10:32 ` Caesar Wang [this message]
2016-06-28 18:52 ` Mark Brown
[not found] ` <20160628185244.GT17217-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-06-28 19:31 ` Doug Anderson
2016-06-28 19:31 ` Doug Anderson
[not found] ` <CAD=FV=UNMhDYy3r+4a4FF8Ndwt+qNuV7_pOC=kzoaUxLfYYp4Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-06-28 19:53 ` Mark Brown
2016-06-28 19:53 ` Mark Brown
[not found] ` <1467089591-7631-1-git-send-email-dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2016-06-28 16:07 ` Brian Norris
2016-06-28 16:07 ` Brian Norris
2016-06-28 18:56 ` Mark Brown
2016-06-28 18:56 ` Mark Brown
[not found] ` <20160628185656.GU17217-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-06-28 19:35 ` Doug Anderson
2016-06-28 19:35 ` Doug Anderson
2016-07-01 8:06 ` Mark Brown
[not found] ` <20160701080614.GA9196-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-07-01 20:17 ` Doug Anderson
2016-07-01 20:17 ` Doug Anderson
[not found] ` <CAD=FV=WKR_Fq6o34886RCY-T-6AKdRqFz9H1aTiRq7Zu=o8TWA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-07-02 7:59 ` Mark Brown
2016-07-02 7:59 ` Mark Brown
2016-07-06 18:30 ` Doug Anderson
2016-07-07 8:17 ` Mark Brown
2016-07-02 15:47 ` Boris Brezillon
2016-07-02 15:47 ` Boris Brezillon
2016-07-04 8:53 ` Mark Brown
2016-07-04 8:53 ` Mark Brown
[not found] ` <20160704085336.GT6247-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2016-07-04 9:05 ` Boris Brezillon
2016-07-04 9:05 ` Boris Brezillon
2016-07-04 9:13 ` Mark Brown
2016-07-04 9:13 ` Mark Brown
2016-07-08 16:41 ` Thierry Reding
2016-07-06 12:27 ` Boris Brezillon
2016-07-06 18:31 ` Doug Anderson
2016-07-07 8:16 ` Mark Brown
2016-07-07 8:03 ` Mark Brown
2016-07-07 8:03 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=57725238.9010809@gmail.com \
--to=caesar.upstream@gmail.com \
--cc=boris.brezillon@free-electrons.com \
--cc=briannorris@chromium.org \
--cc=broonie@kernel.org \
--cc=dianders@chromium.org \
--cc=heiko@sntech.de \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.