* Re: status of MST ?
[not found] ` <CADnq5_N0DEYXh_oEr-JNyboyEJhdojBB+kKcJkR1HDOo84cnRA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2016-08-02 15:15 ` Kenneth Johansson
[not found] ` <57A0B900.5030807-+AkyqHw8l9jYtjvyW6yDsg@public.gmane.org>
0 siblings, 1 reply; 7+ messages in thread
From: Kenneth Johansson @ 2016-08-02 15:15 UTC (permalink / raw)
To: Alex Deucher; +Cc: amd-gfx list
[-- Attachment #1: Type: text/plain, Size: 1690 bytes --]
On 2016-08-01 18:25, Alex Deucher wrote:
> On Mon, Aug 1, 2016 at 12:17 PM, Kenneth Johansson <ken-+AkyqHw8l9jYtjvyW6yDsg@public.gmane.org> wrote:
>> On 2016-08-01 17:12, Alex Deucher wrote:
>>> On Fri, Jul 29, 2016 at 8:51 AM, Kenneth Johansson <ken-+AkyqHw8l9jYtjvyW6yDsg@public.gmane.org> wrote:
>>>> I have a 30" Dell MST monitor and It only uses 30HZ refresh rate when I
>>>> use
>>>> my R9 card. both the open source driver and amdgpu-pro driver.
>>>>
>>>> Is there some way to make it work properly ?
>>>>
>>> It's hard to say what the problem might be without more information
>>> about your monitor and setup. File a bug and attach your xorg log and
>>
>> Sure. I was just wondering if it is supposed to work. No point filing bugs
>> if it's not even supported.
> Yes, MST is supported with the newer DAL modesetting code that is in
> the pro stack, but not yet upstream.
>
> Alex
>
So I retested the 16.30.3-306809 version of the amdgpu-pro on top of
linux 4.4.0-33-generic from ubuntu.
One thing could you have a version string or something printed when the
module is loaded so its easy to see what module has been loaded. maybe
even compile time to make it really clear. this is only needed when
loading modules built manually. maybe the dkms system has some way to
add defines when compiling so a time stamp can be added.
I guess I get the "pro" version as I saw this line.
[drm] DAL is enabled
Do you also want the "pro" bug on bugs.freedesktop.org or do amd have
another bug tracker for pro stuff.
I attach dmesg to this mail as I suspect there should the detection of
MST be happening. the xorg log was over 1MB in size so I save it for the
bug report.
[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 96495 bytes --]
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x9e, date = 2016-06-22
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-33-generic (buildd@lgw01-03) (gcc version 5.3.1 20160413 (Ubuntu 5.3.1-14ubuntu2.1) ) #52-Ubuntu SMP Fri Jul 22 19:16:44 UTC 2016 (Ubuntu 4.4.0-33.52-generic 4.4.15)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-33-generic root=UUID=75bb5d92-206d-4bb8-a405-150b9b93d6d3 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000086b51fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000086b52000-0x0000000086b52fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000086b53000-0x0000000086b9cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000086b9d000-0x000000008e633fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008e634000-0x000000008e96afff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008e96b000-0x000000008eb70fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008eb71000-0x000000008f2cafff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f2cb000-0x000000008fbfefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008fbff000-0x000000008fbfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000c6effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: MSI MS-7976/Z170A GAMING M7 (MS-7976), BIOS 1.B0 02/22/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0xc6f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x8fc00 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcca0-0x000fccaf] mapped at [ffff8800000fcca0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x02200000, 0x02200fff] PGTABLE
[ 0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[ 0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[ 0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[ 0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[ 0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x331de000-0x358e6fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000008F287098 0000B4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000008F2A92C0 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000008F2871E8 0220D3 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000008F2CAF80 000040
[ 0.000000] ACPI: APIC 0x000000008F2A93D0 0000BC (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000008F2A9490 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000008F2A94D8 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000008F2A9578 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000008F2A95B8 000038 (v01 ALASKA A M I 01072009 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x000000008F2A95F0 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x000000008F2A9960 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000008F2A99F8 000248 (v02 INTEL sensrhub 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000008F2A9C40 002BAE (v02 INTEL PtidDevc 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000008F2AC7F0 000BE3 (v02 INTEL Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x000000008F2AD3D8 000034 (v01 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000008F2AD410 000054 (v00 INTEL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000008F2AD468 00062D (v02 INTEL xh_rvp08 00000000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000008F2ADA98 0054A2 (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x000000008F2B2F40 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x000000008F2B2F88 000E73 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x000000008F2B3E00 0000DC (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000c6effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0xc6eff7000-0xc6effbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000c6effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000086b51fff]
[ 0.000000] node 0: [mem 0x0000000086b9d000-0x000000008e633fff]
[ 0.000000] node 0: [mem 0x000000008e96b000-0x000000008eb70fff]
[ 0.000000] node 0: [mem 0x000000008fbff000-0x000000008fbfffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000c6effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000c6effffff]
[ 0.000000] On node 0 totalpages: 12572555
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9056 pages used for memmap
[ 0.000000] DMA32 zone: 579568 pages, LIFO batch:31
[ 0.000000] Normal zone: 187328 pages used for memmap
[ 0.000000] Normal zone: 11988992 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x86b52000-0x86b52fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x86b53000-0x86b9cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8e634000-0x8e96afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8eb71000-0x8f2cafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f2cb000-0x8fbfefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8fc00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x8fc00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff880c6ec00000 s98008 r8192 d28968 u262144
[ 0.000000] pcpu-alloc: s98008 r8192 d28968 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 12376086
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-33-generic root=UUID=75bb5d92-206d-4bb8-a405-150b9b93d6d3 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 49377868K/50290220K available (8394K kernel code, 1282K rwdata, 3944K rodata, 1480K init, 1292K bss, 912352K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:16640 nr_irqs:2048 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Unable to calibrate against PIT
[ 0.000000] tsc: using HPET reference calibration
[ 0.000000] tsc: Detected 4008.362 MHz processor
[ 0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 8016.72 BogoMIPS (lpj=16033448)
[ 0.000018] pid_max: default: 32768 minimum: 301
[ 0.000021] ACPI: Core revision 20150930
[ 0.019310] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.019321] Security Framework initialized
[ 0.019322] Yama: becoming mindful.
[ 0.019331] AppArmor: AppArmor initialized
[ 0.021267] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
[ 0.028237] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.031048] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.031078] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.031314] Initializing cgroup subsys io
[ 0.031316] Initializing cgroup subsys memory
[ 0.031319] Initializing cgroup subsys devices
[ 0.031320] Initializing cgroup subsys freezer
[ 0.031321] Initializing cgroup subsys net_cls
[ 0.031322] Initializing cgroup subsys perf_event
[ 0.031323] Initializing cgroup subsys net_prio
[ 0.031324] Initializing cgroup subsys hugetlb
[ 0.031325] Initializing cgroup subsys pids
[ 0.031341] CPU: Physical Processor ID: 0
[ 0.031341] CPU: Processor Core ID: 0
[ 0.031344] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.031344] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.032214] mce: CPU supports 10 MCE banks
[ 0.032225] CPU0: Thermal monitoring enabled (TM1)
[ 0.032231] process: using mwait in idle threads
[ 0.032233] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.032234] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.032435] Freeing SMP alternatives memory: 28K (ffffffff820b4000 - ffffffff820bb000)
[ 0.034405] ftrace: allocating 31994 entries in 125 pages
[ 0.041902] smpboot: Max logical packages: 2
[ 0.041903] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.041906] DMAR: Host address width 39
[ 0.041907] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.041911] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.041911] DMAR: RMRR base: 0x0000008e6e5000 end: 0x0000008e704fff
[ 0.041912] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[ 0.041913] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[ 0.041913] DMAR: ANDD device: 9 name: \_SB.PCI0.UA00
[ 0.041914] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.041915] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.041915] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.041916] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.043172] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.043172] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.047157] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.086846] TSC deadline timer enabled
[ 0.086851] smpboot: CPU0: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.086859] Performance Events: PEBS fmt3+, 32-deep LBR, Skylake events, full-width counters, Intel PMU driver.
[ 0.086875] ... version: 4
[ 0.086875] ... bit width: 48
[ 0.086876] ... generic registers: 4
[ 0.086876] ... value mask: 0000ffffffffffff
[ 0.086877] ... max period: 0000ffffffffffff
[ 0.086877] ... fixed-purpose events: 3
[ 0.086877] ... event mask: 000000070000000f
[ 0.087316] x86: Booting SMP configuration:
[ 0.087317] .... node #0, CPUs: #1
[ 0.088286] microcode: CPU1 microcode updated early to revision 0x9e, date = 2016-06-22
[ 0.091234] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.091271] #2
[ 0.092235] microcode: CPU2 microcode updated early to revision 0x9e, date = 2016-06-22
[ 0.095185] #3
[ 0.096153] microcode: CPU3 microcode updated early to revision 0x9e, date = 2016-06-22
[ 0.099108] #4 #5 #6 #7
[ 0.112064] x86: Booted up 1 node, 8 CPUs
[ 0.112066] smpboot: Total of 8 processors activated (64133.79 BogoMIPS)
[ 0.117460] devtmpfs: initialized
[ 0.120423] evm: security.selinux
[ 0.120424] evm: security.SMACK64
[ 0.120425] evm: security.SMACK64EXEC
[ 0.120425] evm: security.SMACK64TRANSMUTE
[ 0.120425] evm: security.SMACK64MMAP
[ 0.120426] evm: security.ima
[ 0.120426] evm: security.capability
[ 0.120458] PM: Registering ACPI NVS region [mem 0x86b52000-0x86b52fff] (4096 bytes)
[ 0.120458] PM: Registering ACPI NVS region [mem 0x8eb71000-0x8f2cafff] (7708672 bytes)
[ 0.120544] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.120596] pinctrl core: initialized pinctrl subsystem
[ 0.120732] RTC time: 14:39:41, date: 08/02/16
[ 0.121339] NET: Registered protocol family 16
[ 0.141324] cpuidle: using governor ladder
[ 0.153325] cpuidle: using governor menu
[ 0.153327] PCCT header not found.
[ 0.153363] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.153364] ACPI: bus type PCI registered
[ 0.153364] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.153404] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.153406] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.153412] PCI: Using configuration type 1 for base access
[ 0.169497] ACPI: Added _OSI(Module Device)
[ 0.169498] ACPI: Added _OSI(Processor Device)
[ 0.169498] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.169499] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.173863] ACPI: Executed 26 blocks of module-level executable AML code
[ 0.177372] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.179165] ACPI: Dynamic OEM Table Load:
[ 0.179169] ACPI: SSDT 0xFFFF880C3708A000 000870 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.179643] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.180890] ACPI: Dynamic OEM Table Load:
[ 0.180893] ACPI: SSDT 0xFFFF880C37013000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.184230] ACPI: Interpreter enabled
[ 0.184235] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.184240] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.184251] ACPI: (supports S0 S3 S4 S5)
[ 0.184252] ACPI: Using IOAPIC for interrupt routing
[ 0.184269] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.185318] ACPI: Power Resource [PG00] (on)
[ 0.185519] ACPI: Power Resource [PG01] (on)
[ 0.185702] ACPI: Power Resource [PG02] (on)
[ 0.186497] ACPI: Power Resource [WRST] (off)
[ 0.186659] ACPI: Power Resource [WRST] (off)
[ 0.186821] ACPI: Power Resource [WRST] (off)
[ 0.186981] ACPI: Power Resource [WRST] (off)
[ 0.187142] ACPI: Power Resource [WRST] (off)
[ 0.187305] ACPI: Power Resource [WRST] (off)
[ 0.187470] ACPI: Power Resource [WRST] (off)
[ 0.187634] ACPI: Power Resource [WRST] (off)
[ 0.187794] ACPI: Power Resource [WRST] (off)
[ 0.187955] ACPI: Power Resource [WRST] (off)
[ 0.188116] ACPI: Power Resource [WRST] (off)
[ 0.188276] ACPI: Power Resource [WRST] (off)
[ 0.188437] ACPI: Power Resource [WRST] (off)
[ 0.188598] ACPI: Power Resource [WRST] (off)
[ 0.188760] ACPI: Power Resource [WRST] (off)
[ 0.188920] ACPI: Power Resource [WRST] (off)
[ 0.189083] ACPI: Power Resource [WRST] (off)
[ 0.189245] ACPI: Power Resource [WRST] (off)
[ 0.189411] ACPI: Power Resource [WRST] (off)
[ 0.189571] ACPI: Power Resource [WRST] (off)
[ 0.193286] ACPI: Power Resource [FN00] (off)
[ 0.193330] ACPI: Power Resource [FN01] (off)
[ 0.193376] ACPI: Power Resource [FN02] (off)
[ 0.193417] ACPI: Power Resource [FN03] (off)
[ 0.193459] ACPI: Power Resource [FN04] (off)
[ 0.194056] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.194059] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.194141] acpi PNP0A08:00: _OSC: platform does not support [PME AER]
[ 0.194216] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
[ 0.194217] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.194607] PCI host bridge to bus 0000:00
[ 0.194608] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.194609] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.194610] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.194611] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
[ 0.194612] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.194612] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.194617] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.194777] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.194799] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.194860] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.194921] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[ 0.194930] pci 0000:00:08.0: reg 0x10: [mem 0xdff32000-0xdff32fff 64bit]
[ 0.195025] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.195046] pci 0000:00:14.0: reg 0x10: [mem 0xdff10000-0xdff1ffff 64bit]
[ 0.195088] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.195142] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.195163] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[ 0.195184] pci 0000:00:14.2: reg 0x10: [mem 0xdff31000-0xdff31fff 64bit]
[ 0.195307] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
[ 0.195355] pci 0000:00:15.0: reg 0x10: [mem 0xdff30000-0xdff30fff 64bit]
[ 0.195508] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
[ 0.195544] pci 0000:00:15.1: reg 0x10: [mem 0xdff2f000-0xdff2ffff 64bit]
[ 0.195703] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.195721] pci 0000:00:16.0: reg 0x10: [mem 0xdff2e000-0xdff2efff 64bit]
[ 0.195755] pci 0000:00:16.0: PME# supported from D3hot
[ 0.195839] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.195855] pci 0000:00:17.0: reg 0x10: [mem 0xdff28000-0xdff29fff]
[ 0.195860] pci 0000:00:17.0: reg 0x14: [mem 0xdff2d000-0xdff2d0ff]
[ 0.195865] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.195871] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.195876] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.195881] pci 0000:00:17.0: reg 0x24: [mem 0xdff2c000-0xdff2c7ff]
[ 0.195903] pci 0000:00:17.0: PME# supported from D3hot
[ 0.195982] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[ 0.196024] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.196086] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.196106] pci 0000:00:1c.2: [8086:a112] type 01 class 0x060400
[ 0.196147] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.196207] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.196269] pci 0000:00:1e.0: [8086:a127] type 00 class 0x118000
[ 0.196305] pci 0000:00:1e.0: reg 0x10: [mem 0xdff2b000-0xdff2bfff 64bit]
[ 0.196456] pci 0000:00:1f.0: [8086:a145] type 00 class 0x060100
[ 0.196607] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.196617] pci 0000:00:1f.2: reg 0x10: [mem 0xdff24000-0xdff27fff]
[ 0.196721] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.196751] pci 0000:00:1f.3: reg 0x10: [mem 0xdff20000-0xdff23fff 64bit]
[ 0.196777] pci 0000:00:1f.3: reg 0x20: [mem 0xdff00000-0xdff0ffff 64bit]
[ 0.196806] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.196874] pci 0000:00:1f.3: System wakeup disabled by ACPI
[ 0.196900] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.196952] pci 0000:00:1f.4: reg 0x10: [mem 0xdff2a000-0xdff2a0ff 64bit]
[ 0.197022] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.197170] pci 0000:01:00.0: [1002:7300] type 00 class 0x030000
[ 0.197185] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.197191] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref]
[ 0.197196] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.197200] pci 0000:01:00.0: reg 0x24: [mem 0xdfe00000-0xdfe3ffff]
[ 0.197204] pci 0000:01:00.0: reg 0x30: [mem 0xdfe40000-0xdfe5ffff pref]
[ 0.197229] pci 0000:01:00.0: supports D1 D2
[ 0.197230] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.197245] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.197264] pci 0000:01:00.1: [1002:aae8] type 00 class 0x040300
[ 0.197280] pci 0000:01:00.1: reg 0x10: [mem 0xdfe60000-0xdfe63fff 64bit]
[ 0.197316] pci 0000:01:00.1: supports D1 D2
[ 0.205342] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.205344] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.205345] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.205347] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.205397] pci 0000:02:00.0: [1b21:1242] type 00 class 0x0c0330
[ 0.205428] pci 0000:02:00.0: reg 0x10: [mem 0xdfd00000-0xdfd07fff 64bit]
[ 0.205512] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.205564] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.213346] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.213349] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.213399] pci 0000:03:00.0: [1969:e0a1] type 00 class 0x020000
[ 0.213438] pci 0000:03:00.0: reg 0x10: [mem 0xdfc00000-0xdfc3ffff 64bit]
[ 0.213447] pci 0000:03:00.0: reg 0x18: [io 0xd000-0xd07f]
[ 0.213520] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.213565] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.221349] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.221351] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.221353] pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.222335] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.222364] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.222394] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.222424] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.222450] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.222476] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.222502] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.222528] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.222780] ACPI: Enabled 8 GPEs in block 00 to 7F
[ 0.222831] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.222832] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.222832] vgaarb: loaded
[ 0.222833] vgaarb: bridge control possible 0000:01:00.0
[ 0.222947] SCSI subsystem initialized
[ 0.222963] libata version 3.00 loaded.
[ 0.222973] ACPI: bus type USB registered
[ 0.222980] usbcore: registered new interface driver usbfs
[ 0.222984] usbcore: registered new interface driver hub
[ 0.222993] usbcore: registered new device driver usb
[ 0.223058] PCI: Using ACPI for IRQ routing
[ 0.251034] PCI: pci_cache_line_size set to 64 bytes
[ 0.251113] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.251114] e820: reserve RAM buffer [mem 0x86b52000-0x87ffffff]
[ 0.251114] e820: reserve RAM buffer [mem 0x8e634000-0x8fffffff]
[ 0.251115] e820: reserve RAM buffer [mem 0x8eb71000-0x8fffffff]
[ 0.251116] e820: reserve RAM buffer [mem 0x8fc00000-0x8fffffff]
[ 0.251116] e820: reserve RAM buffer [mem 0xc6f000000-0xc6fffffff]
[ 0.251167] NetLabel: Initializing
[ 0.251167] NetLabel: domain hash size = 128
[ 0.251168] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.251173] NetLabel: unlabeled traffic allowed by default
[ 0.251238] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.251241] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.253279] clocksource: Switched to clocksource hpet
[ 0.256746] AppArmor: AppArmor Filesystem Enabled
[ 0.256770] pnp: PnP ACPI init
[ 0.256903] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.256904] system 00:00: [io 0x0a10-0x0a1f] has been reserved
[ 0.256905] system 00:00: [io 0x0a20-0x0a2f] has been reserved
[ 0.256906] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 0.256907] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.256926] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.256948] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.257008] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.257009] system 00:03: [io 0xffff] has been reserved
[ 0.257009] system 00:03: [io 0xffff] has been reserved
[ 0.257010] system 00:03: [io 0xffff] has been reserved
[ 0.257011] system 00:03: [io 0x1800-0x18fe] could not be reserved
[ 0.257012] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.257013] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257054] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.257056] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257065] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.257084] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.257085] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.257186] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.257187] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.257187] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.257188] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.257189] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.257190] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.257190] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.257191] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.257192] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.257193] system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.257194] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257213] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.257214] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.257215] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.257216] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.257216] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.257217] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.257218] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257367] system 00:09: [io 0xff00-0xfffe] has been reserved
[ 0.257369] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.257833] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.258248] pnp: PnP ACPI: found 11 devices
[ 0.265989] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.266003] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.266005] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.266006] pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
[ 0.266008] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.266010] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.266012] pci 0000:00:1c.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.266016] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.266017] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
[ 0.266019] pci 0000:00:1c.2: bridge window [mem 0xdfc00000-0xdfcfffff]
[ 0.266024] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.266024] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.266025] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.266026] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
[ 0.266026] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.266027] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.266028] pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
[ 0.266028] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref]
[ 0.266029] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.266030] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.266031] pci_bus 0000:03: resource 1 [mem 0xdfc00000-0xdfcfffff]
[ 0.266045] NET: Registered protocol family 2
[ 0.266176] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.266521] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.266604] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.266631] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.266731] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[ 0.266834] NET: Registered protocol family 1
[ 0.274459] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.274551] PCI: CLS 0 bytes, default 64
[ 0.274573] Trying to unpack rootfs image as initramfs...
[ 0.594435] Freeing initrd memory: 39972K (ffff8800331de000 - ffff8800358e7000)
[ 0.594461] DMAR: ACPI device "device:72" under DMAR at fed90000 as 00:15.0
[ 0.594462] DMAR: ACPI device "device:73" under DMAR at fed90000 as 00:15.1
[ 0.594464] DMAR: ACPI device "device:74" under DMAR at fed90000 as 00:1e.0
[ 0.594469] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.594471] software IO TLB [mem 0x8a634000-0x8e634000] (64MB) mapped at [ffff88008a634000-ffff88008e633fff]
[ 0.594611] Scanning for low memory corruption every 60 seconds
[ 0.594864] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.594883] audit: initializing netlink subsys (disabled)
[ 0.594891] audit: type=2000 audit(1470148780.600:1): initialized
[ 0.595083] Initialise system trusted keyring
[ 0.595326] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.595327] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.595989] zbud: loaded
[ 0.596126] VFS: Disk quotas dquot_6.6.0
[ 0.596141] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.596257] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.596435] fuse init (API version 7.23)
[ 0.596513] Key type big_key registered
[ 0.596527] Allocating IMA MOK and blacklist keyrings.
[ 0.597607] Key type asymmetric registered
[ 0.597609] Asymmetric key parser 'x509' registered
[ 0.597624] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.597746] io scheduler noop registered
[ 0.597747] io scheduler deadline registered (default)
[ 0.597760] io scheduler cfq registered
[ 0.597987] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.597990] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.598004] vesafb: mode is 3840x2160x32, linelength=15360, pages=0
[ 0.598004] vesafb: scrolling: redraw
[ 0.598005] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 0.598012] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90008000000, using 32448k, total 32448k
[ 0.598111] Console: switching to colour frame buffer device 480x135
[ 0.598145] fb0: VESA VGA frame buffer device
[ 0.598153] intel_idle: MWAIT substates: 0x142120
[ 0.598153] intel_idle: v0.4.1 model 0x5E
[ 0.598154] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.598403] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.598405] ACPI: Sleep Button [SLPB]
[ 0.598420] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.598421] ACPI: Power Button [PWRB]
[ 0.598436] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.598437] ACPI: Power Button [PWRF]
[ 0.677344] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.677345] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.677415] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.677416] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.677437] GHES: HEST is not enabled!
[ 0.677538] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.698089] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.718674] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.721261] Linux agpgart interface v0.103
[ 0.726091] brd: module loaded
[ 0.728498] loop: module loaded
[ 0.728658] libphy: Fixed MDIO Bus: probed
[ 0.728659] tun: Universal TUN/TAP device driver, 1.6
[ 0.728659] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.728713] PPP generic driver version 2.4.2
[ 0.728767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.728771] ehci-pci: EHCI PCI platform driver
[ 0.728775] ehci-platform: EHCI generic platform driver
[ 0.728780] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.728781] ohci-pci: OHCI PCI platform driver
[ 0.728785] ohci-platform: OHCI generic platform driver
[ 0.728789] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.728853] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.728855] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.729920] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.729923] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.729969] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.729970] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.729970] usb usb1: Product: xHCI Host Controller
[ 0.729971] usb usb1: Manufacturer: Linux 4.4.0-33-generic xhci-hcd
[ 0.729972] usb usb1: SerialNumber: 0000:00:14.0
[ 0.730048] hub 1-0:1.0: USB hub found
[ 0.730061] hub 1-0:1.0: 16 ports detected
[ 0.735975] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.735977] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.735991] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.735992] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.735992] usb usb2: Product: xHCI Host Controller
[ 0.735993] usb usb2: Manufacturer: Linux 4.4.0-33-generic xhci-hcd
[ 0.735993] usb usb2: SerialNumber: 0000:00:14.0
[ 0.736071] hub 2-0:1.0: USB hub found
[ 0.736081] hub 2-0:1.0: 10 ports detected
[ 0.739034] usb: port power management may be unreliable
[ 0.739858] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.739861] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 0.798628] xhci_hcd 0000:02:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
[ 0.798732] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.798733] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.798733] usb usb3: Product: xHCI Host Controller
[ 0.798734] usb usb3: Manufacturer: Linux 4.4.0-33-generic xhci-hcd
[ 0.798735] usb usb3: SerialNumber: 0000:02:00.0
[ 0.798828] hub 3-0:1.0: USB hub found
[ 0.798831] hub 3-0:1.0: 2 ports detected
[ 0.798868] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.798869] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 0.798888] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.798894] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.798894] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.798895] usb usb4: Product: xHCI Host Controller
[ 0.798896] usb usb4: Manufacturer: Linux 4.4.0-33-generic xhci-hcd
[ 0.798896] usb usb4: SerialNumber: 0000:02:00.0
[ 0.798987] hub 4-0:1.0: USB hub found
[ 0.798990] hub 4-0:1.0: 2 ports detected
[ 0.799041] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.802345] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.802346] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.802502] mousedev: PS/2 mouse device common for all mice
[ 0.802783] rtc_cmos 00:05: RTC can wake from S4
[ 0.803186] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.803264] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.803268] i2c /dev entries driver
[ 0.803290] device-mapper: uevent: version 1.0.3
[ 0.803396] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.803404] Intel P-state driver initializing.
[ 0.803406] intel_pstate: HWP enabled
[ 0.805413] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.806018] NET: Registered protocol family 10
[ 0.806314] NET: Registered protocol family 17
[ 0.806320] Key type dns_resolver registered
[ 0.806477] microcode: CPU0 sig=0x506e3, pf=0x2, revision=0x9e
[ 0.806502] microcode: CPU1 sig=0x506e3, pf=0x2, revision=0x9e
[ 0.806521] microcode: CPU2 sig=0x506e3, pf=0x2, revision=0x9e
[ 0.806539] microcode: CPU3 sig=0x506e3, pf=0x2, revision=0x9e
[ 0.806558] microcode: CPU4 sig=0x506e3, pf=0x2, revision=0x9e
[ 0.806582] microcode: CPU5 sig=0x506e3, pf=0x2, revision=0x9e
[ 0.806601] microcode: CPU6 sig=0x506e3, pf=0x2, revision=0x9e
[ 0.806619] microcode: CPU7 sig=0x506e3, pf=0x2, revision=0x9e
[ 0.806688] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.806955] registered taskstats version 1
[ 0.806967] Loading compiled-in X.509 certificates
[ 0.807339] Loaded X.509 cert 'Build time autogenerated kernel key: a4f10a3447a75ba3cb500a3a9f759d511dc6c9c2'
[ 0.807349] zswap: loaded using pool lzo/zbud
[ 0.808654] Key type trusted registered
[ 0.811856] Key type encrypted registered
[ 0.811860] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.811863] ima: No TPM chip found, activating TPM-bypass!
[ 0.811877] evm: HMAC attrs: 0x1
[ 0.812604] Magic number: 12:777:686
[ 0.812940] rtc_cmos 00:05: setting system clock to 2016-08-02 14:39:41 UTC (1470148781)
[ 0.813054] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.813055] EDD information not available.
[ 0.813088] PM: Hibernation image not present or could not be loaded.
[ 0.814061] Freeing unused kernel memory: 1480K (ffffffff81f42000 - ffffffff820b4000)
[ 0.814062] Write protecting the kernel read-only data: 14336k
[ 0.814695] Freeing unused kernel memory: 1832K (ffff880001836000 - ffff880001a00000)
[ 0.815022] Freeing unused kernel memory: 152K (ffff880001dda000 - ffff880001e00000)
[ 0.820984] random: systemd-udevd urandom read with 5 bits of entropy available
[ 0.841209] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.867477] wmi: Mapper loaded
[ 0.877933] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.885128] [drm] Initialized drm 1.1.0 20060810
[ 0.885193] ahci 0000:00:17.0: version 3.0
[ 0.896061] amdgpu: module verification failed: signature and/or required key missing - tainting kernel
[ 0.897766] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:9f:40:ed]
[ 0.899463] [drm] amdgpu kernel modesetting enabled.
[ 0.901492] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 0.901495] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[ 0.902777] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.902778] AMD IOMMUv2 functionality not available on this system
[ 0.905503] CRAT table not found
[ 0.905504] Finished initializing topology ret=0
[ 0.905561] kfd kfd: Initialized module
[ 0.905668] checking generic (c0000000 1fb0000) vs hw (c0000000 10000000)
[ 0.905669] fb: switching to amdgpudrmfb from VESA VGA
[ 0.905691] Console: switching to colour dummy device 80x25
[ 0.906012] [drm] initializing kernel modesetting (FIJI 0x1002:0x7300 0x1043:0x04A0 0xC8).
[ 0.906019] [drm] register mmio base: 0xDFE00000
[ 0.906020] [drm] register mmio size: 262144
[ 0.906025] [drm] doorbell mmio base: 0xD0000000
[ 0.906026] [drm] doorbell mmio size: 2097152
[ 0.906048] [drm] probing gen 2 caps for device 8086:1901 = 261ad03/e
[ 0.906052] [drm] probing mlw for device 8086:1901 = 261ad03
[ 0.906078] amdgpu 0000:01:00.0: Invalid ROM contents
[ 0.906174] ATOM BIOS: 7300HB.15.48.0.64.AS01
[ 0.906187] [drm] Changing default dispclk from 500Mhz to 600Mhz
[ 0.906219] amdgpu 0000:01:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
[ 0.906220] amdgpu 0000:01:00.0: GTT: 4096M 0x0000000100000000 - 0x00000001FFFFFFFF
[ 0.906221] [drm] Detected VRAM RAM=4096M, BAR=256M
[ 0.906222] [drm] RAM width 512bits HBM
[ 0.906376] [TTM] Zone kernel: Available graphics memory: 24710666 kiB
[ 0.906377] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 0.906378] [TTM] Initializing pool allocator
[ 0.906381] [TTM] Initializing DMA pool allocator
[ 0.906393] [drm] amdgpu: 4096M of VRAM memory ready
[ 0.906393] [drm] amdgpu: 4096M of GTT memory ready.
[ 0.906401] [drm] GART: num cpu pages 1048576, num gpu pages 1048576
[ 0.907665] [drm] PCIE GART of 4096M enabled (table at 0x0000000000040000).
[ 0.907707] amdgpu 0000:01:00.0: amdgpu: using MSI.
[ 0.907770] [drm] amdgpu: irq initialized.
[ 0.907774] Can't find requested voltage id in vdd_dep_on_sclk table!
[ 0.918597] amdgpu: powerplay initialized
[ 0.918985] amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000100000008, cpu addr 0xffff880c37438008
[ 0.919143] amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x000000010000001c, cpu addr 0xffff880c3743801c
[ 0.919287] amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000100000030, cpu addr 0xffff880c37438030
[ 0.919374] amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000100000044, cpu addr 0xffff880c37438044
[ 0.919523] amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000100000058, cpu addr 0xffff880c37438058
[ 0.919724] amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000010000006c, cpu addr 0xffff880c3743806c
[ 0.919806] amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000100000080, cpu addr 0xffff880c37438080
[ 0.920068] amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000100000094, cpu addr 0xffff880c37438094
[ 0.920104] amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x00000001000000a8, cpu addr 0xffff880c374380a8
[ 0.920272] amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000001000000bc, cpu addr 0xffff880c374380bc
[ 0.920515] amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000001000000d0, cpu addr 0xffff880c374380d0
[ 0.920579] [drm] Found UVD firmware Version: 1.75 Family ID: 12
[ 0.920870] amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000087f8d0, cpu addr 0xffffc90006e3d8d0
[ 0.920955] [drm] Found VCE firmware Version: 50.17 Binary ID: 3
[ 0.921110] amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000001000000f8, cpu addr 0xffff880c374380f8
[ 0.921191] amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x000000010000010c, cpu addr 0xffff880c3743810c
[ 0.942208] scsi host0: ahci
[ 0.943993] scsi host1: ahci
[ 0.945754] scsi host2: ahci
[ 0.946009] scsi host3: ahci
[ 0.946276] scsi host4: ahci
[ 0.946967] scsi host5: ahci
[ 0.947004] ata1: SATA max UDMA/133 abar m2048@0xdff2c000 port 0xdff2c100 irq 323
[ 0.947008] ata2: SATA max UDMA/133 abar m2048@0xdff2c000 port 0xdff2c180 irq 323
[ 0.947013] ata3: SATA max UDMA/133 abar m2048@0xdff2c000 port 0xdff2c200 irq 323
[ 0.947017] ata4: SATA max UDMA/133 abar m2048@0xdff2c000 port 0xdff2c280 irq 323
[ 0.947022] ata5: SATA max UDMA/133 abar m2048@0xdff2c000 port 0xdff2c300 irq 323
[ 0.947024] ata6: SATA max UDMA/133 abar m2048@0xdff2c000 port 0xdff2c380 irq 323
[ 0.971376] [drm] DAL is enabled
[ 0.971434] [drm] [FeatureOverride_overriden feature] Overridden FEATURE_ENABLE_GPU_SCALING is enabled now
[ 0.971481] [drm] [Backlight_Caps] This method is not supported
[ 0.971511] [drm] [Warning_GPU] Cannot obtain VBIOS integrated info
[ 0.971685] [drm] DC: create_links: connectors_num: physical:4, virtual:0
[ 0.971689] [drm] [HwTrace_Hotplug] Connector[0] description:signal 32
[ 0.971694] [drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC1 [1]
[ 0.971705] [drm] [HwTrace_Hotplug] Connector[1] description:signal 32
[ 0.971707] [drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC2 [2]
[ 0.971734] [drm] [HwTrace_Hotplug] Connector[2] description:signal 32
[ 0.971736] [drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC3 [3]
[ 0.971757] [drm] [HwTrace_Hotplug] Connector[3] description:signal 4
[ 0.971760] [drm] [I2cAux_Config] Using channel: CHANNEL_ID_DDC6 [6]
[ 0.972536] [drm] [IfTrace_DC] Display Core initialized
[ 0.972758] [drm] [HwTrace_Hotplug] link=0, dc_sink_in= (null) is now Disconnected
[ 0.972759] [drm] DCHPD: connector_id=0: dc_sink didn't change.
[ 0.972893] [drm] [HwTrace_Hotplug] link=1, dc_sink_in= (null) is now Disconnected
[ 0.972894] [drm] DCHPD: connector_id=1: dc_sink didn't change.
[ 0.979005] [drm] [Conn_Detect] [DP-3] Rx Caps: 12 14 E4 01 01 01 01 81 00 00 00 00 00 00 00 ^
[ 0.990729] alx 0000:03:00.0 enp3s0: renamed from eth0
[ 1.053319] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.073806] [drm] SADs count is: 0, don't need to read it
[ 1.073814] [drm] [Conn_Detect] [DP-3] DELL UP3214Q: [Block 0] 00 FF FF FF FF FF FF 00 10 AC 93 40 50 30 36 30 0F 19 01 04 B5 46 27 78 3A 73 E0 A3 53 36 B6 26 0D 51 53 A5 4B 00 81 00 B3 00 D1 00 71 4F A9 40 81 80 D1 C0 01 01 A3 66 00 A0 F0 70 1F 80 30 20 35 00 BA 88 21 00 00 1A 00 00 00 FF 00 4B 33 52 39 30 35 34 42 30 36 30 50 0A 00 00 00 FC 00 44 45 4C 4C 20 55 50 33 32 31 34 51 0A 00 00 00 FD 00 1D 4B 1F 8C 1E 00 0A 20 20 20 20 20 20 01 D5 ^
[ 1.073821] [drm] [Conn_Detect] [DP-3] DELL UP3214Q: [Block 1] 02 03 15 B1 50 90 05 04 03 02 07 16 01 06 11 12 15 13 14 1F 20 04 74 00 30 F2 70 5A 80 B0 58 8A 00 BA 88 21 00 00 1E 02 3A 80 18 71 38 2D 40 58 2C 25 00 BA 88 21 00 00 1E 56 5E 00 A0 A0 A0 29 50 30 20 35 00 BA 88 21 00 00 1A 01 1D 00 72 51 D0 1E 20 6E 28 55 00 BA 88 21 00 00 1E 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 BA 88 21 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 84 ^
[ 1.073822] [drm] [Detection_EDID Parser] dc_link_detect: manufacturer_id = AC10, product_id = 4093, serial_number = 30363050, manufacture_week = 15, manufacture_year = 25, display_name = DELL UP3214Q, speaker_flag = 0, audio_mode_count = 0
[ 1.073824] [drm] [HwTrace_Hotplug] link=2, dc_sink_in=ffff880c2eb6a400 is now Connected
[ 1.073825] [drm] DCHPD: connector_id=2: Old sink= (null) New sink=ffff880c2eb6a400
[ 1.098212] [drm] [Conn_Detect] [HDMI-A-1] PHL 242G5: [Block 0] 00 FF FF FF FF FF FF 00 41 0C C4 C0 DE 57 00 00 23 17 01 03 80 35 1E 78 2A 9D E5 A6 54 54 9F 26 0D 50 54 BD 4B 00 D1 FC 95 3C 61 7C 45 7C 31 7C D1 C0 81 80 95 00 02 3A 80 18 71 38 2D 40 58 2C 45 00 13 2B 21 00 00 1E 00 00 00 FF 00 41 55 31 31 33 33 35 30 32 32 34 39 34 00 00 00 FC 00 50 48 4C 20 32 34 32 47 35 0A 20 20 20 00 00 00 FD 00 18 78 1A 8C 21 00 0A 20 20 20 20 20 20 01 5B ^
[ 1.098219] [drm] [Conn_Detect] [HDMI-A-1] PHL 242G5: [Block 1] 02 03 27 F1 51 01 10 04 20 1F 13 03 02 12 11 05 14 06 07 15 16 22 23 09 07 07 83 01 00 00 65 03 0C 00 10 00 E2 00 0F 02 3A 80 18 71 38 2D 40 58 2C 45 00 13 2B 21 00 00 1E 8C 0A D0 8A 20 E0 2D 10 10 3E 96 00 13 2B 21 00 00 18 01 1D 00 72 51 D0 1E 20 6E 28 55 00 13 2B 21 00 00 1E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4E ^
[ 1.098220] [drm] [Detection_EDID Parser] dc_link_detect: manufacturer_id = C41, product_id = C0C4, serial_number = 57DE, manufacture_week = 35, manufacture_year = 23, display_name = PHL 242G5, speaker_flag = 1, audio_mode_count = 1
[ 1.098222] [drm] [Detection_EDID Parser] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
[ 1.098223] [drm] [HwTrace_Hotplug] link=3, dc_sink_in=ffff880c2f03e000 is now Connected
[ 1.098223] [drm] DCHPD: connector_id=3: Old sink= (null) New sink=ffff880c2f03e000
[ 1.098228] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.098229] [drm] Driver supports precise vblank timestamp query.
[ 1.098229] [drm] KMS initialized.
[ 1.099518] [drm] ring test on 0 succeeded in 13 usecs
[ 1.099707] [drm] ring test on 1 succeeded in 27 usecs
[ 1.099746] [drm] ring test on 2 succeeded in 21 usecs
[ 1.099760] [drm] ring test on 3 succeeded in 7 usecs
[ 1.099765] [drm] ring test on 4 succeeded in 2 usecs
[ 1.099771] [drm] ring test on 5 succeeded in 3 usecs
[ 1.099778] [drm] ring test on 6 succeeded in 3 usecs
[ 1.099786] [drm] ring test on 7 succeeded in 4 usecs
[ 1.099791] [drm] ring test on 8 succeeded in 2 usecs
[ 1.099816] [drm] ring test on 9 succeeded in 5 usecs
[ 1.099827] [drm] ring test on 10 succeeded in 5 usecs
[ 1.125641] [drm] ring test on 11 succeeded in 2 usecs
[ 1.125642] [drm] UVD initialized successfully.
[ 1.183143] usb 1-3: New USB device found, idVendor=2109, idProduct=2812
[ 1.183145] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.183146] usb 1-3: Product: USB2.0 Hub
[ 1.183146] usb 1-3: Manufacturer: VIA Labs, Inc.
[ 1.183619] hub 1-3:1.0: USB hub found
[ 1.183988] hub 1-3:1.0: 4 ports detected
[ 1.235326] [drm] ring test on 12 succeeded in 20 usecs
[ 1.235339] [drm] ring test on 13 succeeded in 5 usecs
[ 1.235340] [drm] VCE initialized successfully.
[ 1.246850] [drm] fb mappable at 0xC0A89000
[ 1.246851] [drm] vram apper at 0xC0000000
[ 1.246851] [drm] size 33177600
[ 1.246852] [drm] fb depth is 24
[ 1.246852] [drm] pitch is 15360
[ 1.246971] fbcon: amdgpudrmfb (fb0) is primary device
[ 1.247007] Console: switching to colour frame buffer device 240x67
[ 1.247019] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[ 1.261537] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.261770] [drm] ib test on ring 1 succeeded in 0 usecs
[ 1.261909] [drm] ib test on ring 2 succeeded in 0 usecs
[ 1.262050] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.262191] [drm] ib test on ring 4 succeeded in 0 usecs
[ 1.262332] [drm] ib test on ring 5 succeeded in 0 usecs
[ 1.262474] [drm] ib test on ring 6 succeeded in 0 usecs
[ 1.262538] [drm] ib test on ring 7 succeeded in 0 usecs
[ 1.262663] [drm] ib test on ring 8 succeeded in 0 usecs
[ 1.262800] [drm] ib test on ring 9 succeeded in 0 usecs
[ 1.262941] [drm] ib test on ring 10 succeeded in 0 usecs
[ 1.263846] [drm] ib test on ring 11 succeeded
[ 1.264038] [drm] ib test on ring 12 succeeded
[ 1.264083] pp_set_clockgating_state was not implemented.
[ 1.265382] ata4: SATA link down (SStatus 4 SControl 300)
[ 1.265429] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.265492] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.266309] [drm] Initialized amdgpu 3.2.0 20150101 for 0000:01:00.0 on minor 0
[ 1.273367] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.273447] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.273892] ata3.00: ATAPI: TSSTcorp CDDVDW SH-222AB, SB01, max UDMA/100
[ 1.274238] ata2.00: ATA-8: ST2000DM001-1CH164, CC26, max UDMA/133
[ 1.274240] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.274731] ata3.00: configured for UDMA/100
[ 1.274979] ata2.00: configured for UDMA/133
[ 1.277482] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.280072] ata1.00: ATA-8: KINGSTON SV300S37A120G, 603ABBF0, max UDMA/133
[ 1.280073] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.293573] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.304224] ata1.00: configured for UDMA/133
[ 1.304507] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 BBF0 PQ: 0 ANSI: 5
[ 1.304753] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.304830] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.305564] scsi 1:0:0:0: Direct-Access ATA ST2000DM001-1CH1 CC26 PQ: 0 ANSI: 5
[ 1.305671] sd 0:0:0:0: [sda] Write Protect is off
[ 1.305673] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.305793] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.305993] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.306051] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.306053] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.306061] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.306062] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.306066] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.306975] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-222AB SB01 PQ: 0 ANSI: 5
[ 1.308018] sda: sda1 sda2 sda3
[ 1.308656] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.327668] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.327669] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.327805] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.327960] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 1.377567] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 1.403392] usb 4-2: New USB device found, idVendor=174c, idProduct=55aa
[ 1.403393] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 1.403394] usb 4-2: Product: ASM1051
[ 1.403395] usb 4-2: Manufacturer: Asmedia
[ 1.403396] usb 4-2: SerialNumber: 0123456789ABCDEF0124
[ 1.408124] usb-storage 4-2:1.0: USB Mass Storage device detected
[ 1.408383] usb-storage 4-2:1.0: Quirks match for vid 174c pid 55aa: 400000
[ 1.408485] scsi host6: usb-storage 4-2:1.0
[ 1.408513] usbcore: registered new interface driver usb-storage
[ 1.410218] usbcore: registered new interface driver uas
[ 1.545150] usb 2-3: New USB device found, idVendor=2109, idProduct=0812
[ 1.545151] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.545152] usb 2-3: Product: USB3.0 Hub
[ 1.545153] usb 2-3: Manufacturer: VIA Labs, Inc.
[ 1.546592] hub 2-3:1.0: USB hub found
[ 1.546778] hub 2-3:1.0: 4 ports detected
[ 1.593234] tsc: Refined TSC clocksource calibration: 4008.025 MHz
[ 1.593236] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39c5f9bc15a, max_idle_ns: 440795342831 ns
[ 1.709224] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.839742] usb 1-4: New USB device found, idVendor=2109, idProduct=2812
[ 1.839743] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.839744] usb 1-4: Product: USB2.0 Hub
[ 1.839745] usb 1-4: Manufacturer: VIA Labs, Inc.
[ 1.840354] hub 1-4:1.0: USB hub found
[ 1.840529] hub 1-4:1.0: 4 ports detected
[ 1.921205] usb 1-3.1: new high-speed USB device number 4 using xhci_hcd
[ 2.024266] usb 1-3.1: New USB device found, idVendor=2109, idProduct=2812
[ 2.024268] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.024269] usb 1-3.1: Product: USB2.0 Hub
[ 2.024269] usb 1-3.1: Manufacturer: VIA Labs, Inc.
[ 2.024929] hub 1-3.1:1.0: USB hub found
[ 2.025377] hub 1-3.1:1.0: 4 ports detected
[ 2.133399] usb 2-4: new SuperSpeed USB device number 3 using xhci_hcd
[ 2.384882] usb 2-4: New USB device found, idVendor=2109, idProduct=0812
[ 2.384884] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.384885] usb 2-4: Product: USB3.0 Hub
[ 2.384885] usb 2-4: Manufacturer: VIA Labs, Inc.
[ 2.386467] hub 2-4:1.0: USB hub found
[ 2.386655] hub 2-4:1.0: 4 ports detected
[ 2.406801] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 5
[ 2.407388] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 2.410270] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 2.549148] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[ 2.593503] clocksource: Switched to clocksource tsc
[ 2.679411] usb 1-8: New USB device found, idVendor=046d, idProduct=c52b
[ 2.679412] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.679413] usb 1-8: Product: USB Receiver
[ 2.679414] usb 1-8: Manufacturer: Logitech
[ 2.685340] usbcore: registered new interface driver usbhid
[ 2.685341] usbhid: USB HID core driver
[ 2.687088] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-8/input2
[ 2.749203] usb 2-3.1: new SuperSpeed USB device number 4 using xhci_hcd
[ 2.807885] input: Logitech K350 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:046D:C52B.0003/0003:046D:200A.0004/input/input6
[ 2.808002] logitech-hidpp-device 0003:046D:200A.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K350] on usb-0000:00:14.0-8:1
[ 2.809870] input: Logitech M325 as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.2/0003:046D:C52B.0003/0003:046D:400A.0005/input/input7
[ 2.809979] logitech-hidpp-device 0003:046D:400A.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:14.0-8:2
[ 3.000712] usb 2-3.1: New USB device found, idVendor=2109, idProduct=0812
[ 3.000713] usb 2-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.000714] usb 2-3.1: Product: USB3.0 Hub
[ 3.000715] usb 2-3.1: Manufacturer: VIA Labs, Inc.
[ 3.002686] hub 2-3.1:1.0: USB hub found
[ 3.002868] hub 2-3.1:1.0: 4 ports detected
[ 3.081077] usb 1-3.3: new full-speed USB device number 6 using xhci_hcd
[ 3.183934] usb 1-3.3: New USB device found, idVendor=0b05, idProduct=17cb
[ 3.183935] usb 1-3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.183936] usb 1-3.3: Product: BCM20702A0
[ 3.183936] usb 1-3.3: Manufacturer: Broadcom Corp
[ 3.183950] usb 1-3.3: SerialNumber: 5CF3706210FA
[ 3.265059] usb 1-4.1: new high-speed USB device number 7 using xhci_hcd
[ 3.366548] usb 1-4.1: New USB device found, idVendor=2109, idProduct=2812
[ 3.366549] usb 1-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.366550] usb 1-4.1: Product: USB2.0 Hub
[ 3.366551] usb 1-4.1: Manufacturer: VIA Labs, Inc.
[ 3.367300] hub 1-4.1:1.0: USB hub found
[ 3.367444] hub 1-4.1:1.0: 4 ports detected
[ 3.449045] usb 1-3.1.2: new full-speed USB device number 8 using xhci_hcd
[ 3.554331] usb 1-3.1.2: New USB device found, idVendor=0403, idProduct=6001
[ 3.554332] usb 1-3.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.554333] usb 1-3.1.2: Product: TTL232R
[ 3.554333] usb 1-3.1.2: Manufacturer: FTDI
[ 3.554334] usb 1-3.1.2: SerialNumber: FTD6BLWK
[ 3.661033] usb 1-11: new full-speed USB device number 9 using xhci_hcd
[ 3.870604] usb 1-11: New USB device found, idVendor=045e, idProduct=07a5
[ 3.870606] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.870606] usb 1-11: Product: Microsoft® 2.4GHz Transceiver v9.0
[ 3.870607] usb 1-11: Manufacturer: Microsoft
[ 3.897724] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:045E:07A5.0006/input/input8
[ 3.917168] usb 2-4.1: new SuperSpeed USB device number 5 using xhci_hcd
[ 3.953079] hid-generic 0003:045E:07A5.0006: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-11/input0
[ 3.953161] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.1/0003:045E:07A5.0007/input/input9
[ 3.953320] hid-generic 0003:045E:07A5.0007: input,hidraw4: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-11/input1
[ 3.997711] input: Microsoft Microsoft® 2.4GHz Transceiver v9.0 as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.2/0003:045E:07A5.0008/input/input10
[ 4.053147] hid-generic 0003:045E:07A5.0008: input,hidraw5: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v9.0] on usb-0000:00:14.0-11/input2
[ 4.168598] usb 2-4.1: New USB device found, idVendor=2109, idProduct=0812
[ 4.168599] usb 2-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.168600] usb 2-4.1: Product: USB3.0 Hub
[ 4.168601] usb 2-4.1: Manufacturer: VIA Labs, Inc.
[ 4.170433] hub 2-4.1:1.0: USB hub found
[ 4.170617] hub 2-4.1:1.0: 4 ports detected
[ 4.248978] usb 1-4.1.1: new full-speed USB device number 10 using xhci_hcd
[ 4.332977] usb 1-4.1.1: device descriptor read/64, error -32
[ 4.520960] usb 1-4.1.1: device descriptor read/64, error -32
[ 4.736946] usb 1-12: new full-speed USB device number 11 using xhci_hcd
[ 4.877685] usb 1-12: New USB device found, idVendor=046d, idProduct=c041
[ 4.877686] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.877687] usb 1-12: Product: USB Gaming Mouse
[ 4.877688] usb 1-12: Manufacturer: Logitech
[ 4.877808] usb 1-12: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.884102] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/0003:046D:C041.0009/input/input11
[ 4.884312] hid-generic 0003:046D:C041.0009: input,hidraw6: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:14.0-12/input0
[ 4.888981] hid-generic 0003:046D:C041.000A: hiddev0,hidraw7: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:14.0-12/input1
[ 4.948922] usb 1-4.1.1: new full-speed USB device number 12 using xhci_hcd
[ 5.032916] usb 1-4.1.1: device descriptor read/64, error -32
[ 5.220902] usb 1-4.1.1: device descriptor read/64, error -32
[ 5.408883] usb 1-4.1.1: new full-speed USB device number 13 using xhci_hcd
[ 5.409019] usb 1-4.1.1: Device not responding to setup address.
[ 5.524062] sdb: sdb1 sdb2 sdb3
[ 5.524582] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.613031] usb 1-4.1.1: Device not responding to setup address.
[ 5.820803] usb 1-4.1.1: device not accepting address 13, error -71
[ 5.859249] [drm] Atomic commit: SET crtc id 0: [ffff880c2fa32000]
[ 5.859251] [drm] [IfTrace_DC] dc_commit_targets: 1 targets
[ 5.859252] [drm] [IfTrace_DC] core_target 0x2f9c4360: stream_count=1
[ 5.859252] [drm] [IfTrace_DC] core_stream 0x2ec2a800: src: 0, 0, 0, 0; dst: 0, 0, 0, 0;
[ 5.859253] [drm] [IfTrace_DC] pix_clk_khz: 262750, h_total: 4000, v_total: 2191
[ 5.859254] [drm] [IfTrace_DC] sink name: DELL UP3214Q, serial: 808857680
[ 5.859254] [drm] [IfTrace_DC] link: 2
[ 5.862046] [drm] [Detection_DP caps] Link: 2 eDP panel mode supported: 0 eDP panel mode enabled: 0
[ 5.885790] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.889206] [drm] [Conn_LKTN] [DP-3] HBR2x4 pass VS=0, PE=1^
[ 5.889691] [drm] [Conn_Mode] [DP-3] {3840x2160, 4000x2191@262750Khz}^
[ 5.889692] [drm] DM_NOT_IMPL: dm_bandwidth_update
[ 5.890049] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 5.890050] [drm] [IfTrace_DC] Pipe:0 0x2ec2aa00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 5.890112] [drm] Atomic commit: SET crtc id 1: [ffff880c2fa34000]
[ 5.890113] [drm] [IfTrace_DC] dc_commit_targets: 2 targets
[ 5.890113] [drm] [IfTrace_DC] core_target 0x2f9c4360: stream_count=1
[ 5.890114] [drm] [IfTrace_DC] core_stream 0x2ec2a800: src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 5.890114] [drm] [IfTrace_DC] pix_clk_khz: 262750, h_total: 4000, v_total: 2191
[ 5.890115] [drm] [IfTrace_DC] sink name: DELL UP3214Q, serial: 808857680
[ 5.890115] [drm] [IfTrace_DC] link: 2
[ 5.890116] [drm] [IfTrace_DC] core_target 0x2f9c43e0: stream_count=1
[ 5.890116] [drm] [IfTrace_DC] core_stream 0x2ec2b000: src: 0, 0, 0, 0; dst: 0, 0, 0, 0;
[ 5.890117] [drm] [IfTrace_DC] pix_clk_khz: 148500, h_total: 2200, v_total: 1125
[ 5.890117] [drm] [IfTrace_DC] sink name: PHL 242G5, serial: 22494
[ 5.890118] [drm] [IfTrace_DC] link: 3
[ 5.895014] [drm] [HwTrace_HpdIrq] dc_link_handle_hpd_rx_irq: Got short pulse HPD on link 2
[ 5.895426] [drm] [HwTrace_HpdIrq] hpd_rx_irq_check_link_loss_status: Link Status changed.
[ 5.895427] [drm] [Conn_LinkLoss] [DP-3] Status: 02 00 11 11 80 00 ^
[ 5.902132] [drm] [Conn_Mode] [DP-3] {3840x2160, 4000x2191@262750Khz}^
[ 5.902133] [drm] [Conn_Mode] [HDMI-A-1] {1920x1080, 2200x1125@148500Khz}^
[ 5.902134] [drm] DM_NOT_IMPL: dm_bandwidth_update
[ 5.903048] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 5.903050] [drm] [IfTrace_DC] Pipe:1 0x2ec2b200: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 5.904810] [drm] [Conn_LKTN] [DP-3] HBR2x4 pass VS=0, PE=1^
[ 5.904883] usb 1-4.1.1: new full-speed USB device number 14 using xhci_hcd
[ 5.905054] usb 1-4.1.1: Device not responding to setup address.
[ 5.975433] random: nonblocking pool is initialized
[ 5.983608] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.983701] systemd[1]: Detected architecture x86-64.
[ 5.984789] systemd[1]: Set hostname to <brix>.
[ 6.086655] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.086710] systemd[1]: Listening on Journal Audit Socket.
[ 6.086771] systemd[1]: Created slice System Slice.
[ 6.086822] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.086844] systemd[1]: Listening on Journal Socket.
[ 6.096855] systemd[1]: Started Read required files in advance.
[ 6.096995] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 6.097009] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.097031] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.097044] systemd[1]: Listening on udev Kernel Socket.
[ 6.097230] systemd[1]: Mounting Debug File System...
[ 6.099570] systemd[1]: Starting Load Kernel Modules...
[ 6.099665] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.099694] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.099874] systemd[1]: Mounting Huge Pages File System...
[ 6.099881] systemd[1]: Reached target Swap.
[ 6.099892] systemd[1]: Reached target Encrypted Volumes.
[ 6.102761] systemd[1]: Starting Set the console keyboard layout...
[ 6.102788] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 6.102994] systemd[1]: Starting Uncomplicated firewall...
[ 6.103194] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.103206] systemd[1]: Reached target User and Group Name Lookups.
[ 6.105492] systemd[1]: Listening on Syslog Socket.
[ 6.105543] systemd[1]: Created slice User and Session Slice.
[ 6.105549] systemd[1]: Reached target Slices.
[ 6.105563] systemd[1]: Listening on LVM2 poll daemon socket.
[ 6.105578] systemd[1]: Listening on udev Control Socket.
[ 6.105776] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 6.105803] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 6.105984] systemd[1]: Mounting RPC Pipe File System...
[ 6.106206] systemd[1]: Starting Journal Service...
[ 6.106426] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 6.107957] systemd[1]: Started Uncomplicated firewall.
[ 6.108883] usb 1-4.1.1: Device not responding to setup address.
[ 6.111930] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 6.112325] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.116285] systemd[1]: Mounted Huge Pages File System.
[ 6.116329] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.116355] systemd[1]: Mounted Debug File System.
[ 6.121220] lp: driver loaded but no devices found
[ 6.123800] ppdev: user-space parallel port driver
[ 6.125402] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
[ 6.126029] parport0: irq 7 detected
[ 6.131480] RPC: Registered named UNIX socket transport module.
[ 6.131482] RPC: Registered udp transport module.
[ 6.131482] RPC: Registered tcp transport module.
[ 6.131483] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.131809] systemd[1]: Mounted RPC Pipe File System.
[ 6.142358] systemd[1]: Started Journal Service.
[ 6.220852] lp0: using parport0 (polling).
[ 6.225295] nct6775: Found NCT6793D or compatible chip at 0x4e:0xa20
[ 6.267148] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 6.278158] systemd-journald[1579]: Received request to flush runtime journal from PID 1
[ 6.312765] usb 1-4.1.1: device not accepting address 14, error -71
[ 6.312917] usb 1-4.1-port1: unable to enumerate USB device
[ 6.364416] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.367964] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[ 6.378596] Bluetooth: Core ver 2.21
[ 6.378605] NET: Registered protocol family 31
[ 6.378606] Bluetooth: HCI device and connection manager initialized
[ 6.378608] Bluetooth: HCI socket layer initialized
[ 6.378610] Bluetooth: L2CAP socket layer initialized
[ 6.378613] Bluetooth: SCO socket layer initialized
[ 6.383052] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 6.392539] Bluetooth: HCI UART driver ver 2.3
[ 6.392542] Bluetooth: HCI UART protocol H4 registered
[ 6.392542] Bluetooth: HCI UART protocol BCSP registered
[ 6.392543] Bluetooth: HCI UART protocol LL registered
[ 6.392544] Bluetooth: HCI UART protocol ATH3K registered
[ 6.392545] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 6.392565] Bluetooth: HCI UART protocol Intel registered
[ 6.392571] Bluetooth: HCI UART protocol BCM registered
[ 6.392572] Bluetooth: HCI UART protocol QCA registered
[ 6.396763] usb 1-4.1.3: new high-speed USB device number 15 using xhci_hcd
[ 6.397049] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[ 6.397219] idma64 idma64.1: Found Intel integrated DMA 64-bit
[ 6.413085] intel-lpss 0000:00:1e.0: enabling device (0000 -> 0002)
[ 6.413268] idma64 idma64.2: Found Intel integrated DMA 64-bit
[ 6.430028] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 6.430407] AVX2 version of gcm_enc/dec engaged.
[ 6.430408] AES CTR mode by8 optimization enabled
[ 6.443691] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 6.443694] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 6.487304] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 6.487351] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 6.487391] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[ 6.487422] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[ 6.487455] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[ 6.487493] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 6.498818] intel_rapl: Found RAPL domain package
[ 6.498822] intel_rapl: Found RAPL domain core
[ 6.498825] intel_rapl: Found RAPL domain dram
[ 6.498993] usb 1-4.1.3: New USB device found, idVendor=0424, idProduct=2134
[ 6.498995] usb 1-4.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.498996] usb 1-4.1.3: Product: USB2134B
[ 6.498997] usb 1-4.1.3: Manufacturer: SMSC
[ 6.500109] hub 1-4.1.3:1.0: USB hub found
[ 6.500164] hub 1-4.1.3:1.0: 4 ports detected
[ 6.508737] usbcore: registered new interface driver btusb
[ 6.514586] Bluetooth: hci0: BCM: chip id 63
[ 6.519473] snd_hda_intel 0000:00:1f.3: failed to add i915_bpo component master (-19)
[ 6.530585] Bluetooth: hci0: ChromeLinux_9640
[ 6.531585] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
[ 6.536353] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 6.536819] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 6.536821] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.536822] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.536823] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 6.536824] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 6.536825] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 6.536826] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 6.536827] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 6.536828] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 6.541763] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17cb.hcd failed with error -2
[ 6.541767] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17cb.hcd not found
[ 6.548326] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input18
[ 6.548360] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19
[ 6.548395] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20
[ 6.548436] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[ 6.548479] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[ 6.548520] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[ 6.548564] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[ 6.664885] dw-apb-uart.2: ttyS4 at MMIO 0xdff2b000 (irq = 20, base_baud = 115200) is a 16550A
[ 6.686066] audit: type=1400 audit(1470148787.368:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="unity8-dash" pid=3772 comm="apparmor_parser"
[ 6.687102] audit: type=1400 audit(1470148787.368:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=3771 comm="apparmor_parser"
[ 6.688193] audit: type=1400 audit(1470148787.368:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=3766 comm="apparmor_parser"
[ 6.688195] audit: type=1400 audit(1470148787.368:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=3766 comm="apparmor_parser"
[ 6.688377] audit: type=1400 audit(1470148787.368:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/libvirt/virt-aa-helper" pid=3774 comm="apparmor_parser"
[ 6.691241] audit: type=1400 audit(1470148787.372:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=3767 comm="apparmor_parser"
[ 6.691244] audit: type=1400 audit(1470148787.372:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3767 comm="apparmor_parser"
[ 6.691246] audit: type=1400 audit(1470148787.372:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=3767 comm="apparmor_parser"
[ 6.691248] audit: type=1400 audit(1470148787.372:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=3767 comm="apparmor_parser"
[ 6.691654] audit: type=1400 audit(1470148787.372:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=3776 comm="apparmor_parser"
[ 6.776724] usb 1-4.1.3.4: new high-speed USB device number 16 using xhci_hcd
[ 6.809819] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.810627] alx 0000:03:00.0 enp3s0: NIC Up: 1 Gbps Full
[ 6.810827] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 6.976464] usb 1-4.1.3.4: New USB device found, idVendor=0bda, idProduct=0307
[ 6.976466] usb 1-4.1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.976467] usb 1-4.1.3.4: Product: USB3.0 Card Reader
[ 6.976468] usb 1-4.1.3.4: Manufacturer: Realtek
[ 6.976469] usb 1-4.1.3.4: SerialNumber: T14000033092
[ 6.981898] usb-storage 1-4.1.3.4:1.0: USB Mass Storage device detected
[ 6.981923] scsi host7: usb-storage 1-4.1.3.4:1.0
[ 7.184843] usb 1-4.1.3.2: new high-speed USB device number 17 using xhci_hcd
[ 7.191877] cgroup: new mount options do not match the existing superblock, will be ignored
[ 7.215939] systemd[1]: apt-daily.timer: Adding 6h 57min 29.254016s random time.
[ 7.215951] systemd[1]: snapd.refresh.timer: Adding 53min 20.500956s random time.
[ 7.215955] systemd[1]: snapd.refresh.timer: Adding 2h 24min 2.330365s random time.
[ 7.266300] rfkill: input handler disabled
[ 7.272979] usb 1-4.1.3.2: New USB device found, idVendor=0424, idProduct=2134
[ 7.272981] usb 1-4.1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.272982] usb 1-4.1.3.2: Product: USB2134B
[ 7.272982] usb 1-4.1.3.2: Manufacturer: SMSC
[ 7.273555] hub 1-4.1.3.2:1.0: USB hub found
[ 7.273610] hub 1-4.1.3.2:1.0: 3 ports detected
[ 7.297220] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 7.297223] [drm] [IfTrace_DC] Pipe:0 0x35d4f800: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 7.297266] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 7.297268] [drm] [IfTrace_DC] Pipe:1 0x35d4e000: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 7.297383] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 7.297385] [drm] [IfTrace_DC] Pipe:0 0x30a64e00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 7.297446] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 7.297448] [drm] [IfTrace_DC] Pipe:1 0x30a65200: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 7.297548] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 7.297550] [drm] [IfTrace_DC] Pipe:0 0x30a65c00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 7.297591] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 7.297592] [drm] [IfTrace_DC] Pipe:1 0x30a64e00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 7.297677] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 7.297678] [drm] [IfTrace_DC] Pipe:0 0x30a65200: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 7.297718] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 7.297719] [drm] [IfTrace_DC] Pipe:1 0x30a65c00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 7.452933] usbcore: registered new interface driver usbserial
[ 7.452943] usbcore: registered new interface driver usbserial_generic
[ 7.452951] usbserial: USB Serial support registered for generic
[ 7.455926] usbcore: registered new interface driver ftdi_sio
[ 7.455934] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 7.455983] ftdi_sio 1-3.1.2:1.0: FTDI USB Serial Device converter detected
[ 7.456001] usb 1-3.1.2: Detected FT232RL
[ 7.456182] usb 1-3.1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7.544664] usb 1-4.1.3.2.3: new full-speed USB device number 18 using xhci_hcd
[ 7.564012] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.564014] Bluetooth: BNEP filters: protocol multicast
[ 7.564016] Bluetooth: BNEP socket layer initialized
[ 7.579836] Bluetooth: RFCOMM TTY layer initialized
[ 7.579841] Bluetooth: RFCOMM socket layer initialized
[ 7.579843] Bluetooth: RFCOMM ver 1.11
[ 7.591402] systemd[1]: apt-daily.timer: Adding 5h 34min 25.185920s random time.
[ 7.591426] systemd[1]: snapd.refresh.timer: Adding 1h 17min 11.354990s random time.
[ 7.591430] systemd[1]: snapd.refresh.timer: Adding 3h 22min 23.110087s random time.
[ 7.640347] usb 1-4.1.3.2.3: New USB device found, idVendor=04d8, idProduct=0b1f
[ 7.640350] usb 1-4.1.3.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.640351] usb 1-4.1.3.2.3: Product: USB TO HID Ver.2.00
[ 7.640352] usb 1-4.1.3.2.3: Manufacturer: Microchip Technology Inc.
[ 7.640844] systemd[1]: apt-daily.timer: Adding 2h 42min 9.712604s random time.
[ 7.640869] systemd[1]: snapd.refresh.timer: Adding 5h 50min 8.460214s random time.
[ 7.640872] systemd[1]: snapd.refresh.timer: Adding 1h 13min 31.930448s random time.
[ 7.643146] hid-generic 0003:04D8:0B1F.000B: hiddev0,hidraw8: USB HID v1.11 Device [Microchip Technology Inc. USB TO HID Ver.2.00] on usb-0000:00:14.0-4.1.3.2.3/input0
[ 7.738959] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 7.738962] [drm] [IfTrace_DC] Pipe:0 0x32a8e400: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 7.739013] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 7.739015] [drm] [IfTrace_DC] Pipe:1 0x30a66c00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 7.739071] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 7.739073] [drm] [IfTrace_DC] Pipe:0 0x30a65c00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 7.739113] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 7.739115] [drm] [IfTrace_DC] Pipe:1 0x32a8e800: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 7.739163] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 7.739165] [drm] [IfTrace_DC] Pipe:0 0x32a8e400: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 7.739204] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 7.739206] [drm] [IfTrace_DC] Pipe:1 0x30a65c00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 7.742950] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 7.742953] [drm] [IfTrace_DC] Pipe:0 0x30a66c00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 7.742994] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 7.742996] [drm] [IfTrace_DC] Pipe:1 0x32a8e400: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 7.778977] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 7.778981] [drm] [IfTrace_DC] Pipe:0 0x36764600: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 7.779031] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 7.779033] [drm] [IfTrace_DC] Pipe:1 0x36765000: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 7.986913] scsi 7:0:0:0: Direct-Access Generic- SD/MMC/MS/MSPRO 1.00 PQ: 0 ANSI: 4
[ 7.987104] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 7.992096] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[ 8.422299] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 8.422302] [drm] [IfTrace_DC] Pipe:0 0x342e1400: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 8.422349] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 8.422350] [drm] [IfTrace_DC] Pipe:1 0x342e1600: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 8.605357] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 8.605361] [drm] [IfTrace_DC] Pipe:0 0x302b9a00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 8.605401] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 8.605403] [drm] [IfTrace_DC] Pipe:0 0x302bb000: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 8.605438] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 8.605440] [drm] [IfTrace_DC] Pipe:0 0x302b9a00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 8.605488] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 8.605490] [drm] [IfTrace_DC] Pipe:1 0x302baa00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 8.605525] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 8.605526] [drm] [IfTrace_DC] Pipe:1 0x302b9800: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 8.605561] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 8.605562] [drm] [IfTrace_DC] Pipe:1 0x302baa00: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 8.760647] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 8.760649] [drm] [IfTrace_DC] Pipe:0 0x3071e800: addr hi:0x0, addr low:0xa89000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 8.764723] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 8.764725] [drm] [IfTrace_DC] Pipe:0 0x3071ec00: addr hi:0x0, addr low:0xfcee0000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 8.764776] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 8.764777] [drm] [IfTrace_DC] Pipe:1 0x3071e800: addr hi:0x0, addr low:0xa89000, src: 0, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 8.768835] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 8.768837] [drm] [IfTrace_DC] Pipe:1 0x3071f000: addr hi:0x0, addr low:0xfcee0000, src: 3840, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 8.769025] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 8.769027] [drm] [IfTrace_DC] Pipe:0 0x3071e800: addr hi:0x0, addr low:0xfcee0000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 8.773085] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 8.773087] [drm] [IfTrace_DC] Pipe:0 0x3071ec00: addr hi:0x0, addr low:0xfcee0000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 8.773127] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 8.773128] [drm] [IfTrace_DC] Pipe:1 0x3071e800: addr hi:0x0, addr low:0xfcee0000, src: 3840, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 8.777182] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 8.777184] [drm] [IfTrace_DC] Pipe:1 0x3071f000: addr hi:0x0, addr low:0xfcee0000, src: 3840, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 10.152833] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 10.152838] [drm] [IfTrace_DC] Pipe:0 0x33fe5200: addr hi:0x0, addr low:0xfcee0000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 10.157030] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c43e0
[ 10.157033] [drm] [IfTrace_DC] Pipe:1 0x33fe4a00: addr hi:0x0, addr low:0xfcee0000, src: 3840, 0, 1920, 1080; dst: 0, 0, 1920, 1080;
[ 14.343865] FS-Cache: Loaded
[ 14.350657] FS-Cache: Netfs 'nfs' registered for caching
[ 15.809715] sdb: sdb1 sdb2 sdb3
[ 16.351458] [drm] Atomic commit: RESET. crtc id 1:[ffff880c2fa34000]
[ 16.351477] [drm] [IfTrace_DC] dc_commit_targets: 1 targets
[ 16.351478] [drm] [IfTrace_DC] core_target 0x2f9c4360: stream_count=1
[ 16.351480] [drm] [IfTrace_DC] core_stream 0x2ec2a800: src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 16.351480] [drm] [IfTrace_DC] pix_clk_khz: 262750, h_total: 4000, v_total: 2191
[ 16.351481] [drm] [IfTrace_DC] sink name: DELL UP3214Q, serial: 808857680
[ 16.351482] [drm] [IfTrace_DC] link: 2
[ 16.396627] [drm] [Conn_Mode] [DP-3] {3840x2160, 4000x2191@262750Khz}^
[ 16.396630] [drm] DM_NOT_IMPL: dm_bandwidth_update
[ 16.397671] [drm] Atomic commit: RESET. crtc id 1:[ffff880c2fa34000]
[ 16.398673] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 16.398676] [drm] [IfTrace_DC] Pipe:0 0x306a4000: addr hi:0x0, addr low:0xfcee0000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 16.402781] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 16.402783] [drm] [IfTrace_DC] Pipe:0 0x306a5000: addr hi:0x0, addr low:0xf7c80000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 16.512511] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 16.512514] [drm] [IfTrace_DC] Pipe:0 0x30728000: addr hi:0x0, addr low:0xf7c80000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 17.211092] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 17.211096] [drm] [IfTrace_DC] Pipe:0 0x36766600: addr hi:0x0, addr low:0xf7c80000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[ 17.215783] [drm] [IfTrace_DC] dc_commit_surfaces_to_target: commit 1 surfaces to target 0x2f9c4360
[ 17.215786] [drm] [IfTrace_DC] Pipe:0 0x36764e00: addr hi:0x0, addr low:0xf7c80000, src: 0, 0, 3840, 2160; dst: 0, 0, 3840, 2160;
[-- Attachment #3: Type: text/plain, Size: 154 bytes --]
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
^ permalink raw reply [flat|nested] 7+ messages in thread