* [PATCH 0/2] HuC/GuC status to Get Params.
@ 2016-08-16 11:18 Peter Antoine
2016-08-16 11:18 ` [PATCH 1/2] drm/i915/get_params: Add GuC status to getparams Peter Antoine
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Peter Antoine @ 2016-08-16 11:18 UTC (permalink / raw)
To: intel-gfx
As it states on the tin. Add the HuC/GuC patches to the Get params so
that they can be accessed from userspace. This is a requirement for the
opensourcing of media codecs that require the HuC/GuC.
These patches require the HuC enabling patches. patchset: HuC Loading Patches.
Peter Antoine (2):
drm/i915/get_params: Add GuC status to getparams
drm/i915/get_params: Add HuC status to getparams
drivers/gpu/drm/i915/i915_drv.c | 8 ++++++++
drivers/gpu/drm/i915/intel_guc.h | 2 +-
drivers/gpu/drm/i915/intel_guc_loader.c | 19 +++++++++++++++++++
drivers/gpu/drm/i915/intel_huc.h | 2 +-
drivers/gpu/drm/i915/intel_huc_loader.c | 21 +++++++++++++++++++++
include/uapi/drm/i915_drm.h | 2 ++
6 files changed, 52 insertions(+), 2 deletions(-)
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread* [PATCH 1/2] drm/i915/get_params: Add GuC status to getparams 2016-08-16 11:18 [PATCH 0/2] HuC/GuC status to Get Params Peter Antoine @ 2016-08-16 11:18 ` Peter Antoine 2016-08-16 11:18 ` [PATCH 2/2] drm/i915/get_params: Add HuC " Peter Antoine 2016-08-16 11:58 ` ✗ Ro.CI.BAT: failure for HuC/GuC status to Get Params Patchwork 2 siblings, 0 replies; 6+ messages in thread From: Peter Antoine @ 2016-08-16 11:18 UTC (permalink / raw) To: intel-gfx This patch returns the GuC status to the caller. It is used so that the userspace knows if the GuC has been loaded. Signed-off-by: Peter Antoine <peter.antoine@intel.com> --- drivers/gpu/drm/i915/i915_drv.c | 4 ++++ drivers/gpu/drm/i915/intel_guc.h | 2 +- drivers/gpu/drm/i915/intel_guc_loader.c | 19 +++++++++++++++++++ include/uapi/drm/i915_drm.h | 1 + 4 files changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 499a6ff..c8fc3d0 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -49,6 +49,7 @@ #include "i915_trace.h" #include "i915_vgpu.h" #include "intel_drv.h" +#include "intel_guc.h" static struct drm_driver driver; @@ -354,6 +355,9 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_MIN_EU_IN_POOL: value = INTEL_INFO(dev)->min_eu_in_pool; break; + case I915_PARAM_HAS_GUC: + value = intel_is_guc_valid(dev); + break; default: DRM_DEBUG("Unknown parameter %d\n", param->param); return -EINVAL; diff --git a/drivers/gpu/drm/i915/intel_guc.h b/drivers/gpu/drm/i915/intel_guc.h index efddaed..5e8bb1e 100644 --- a/drivers/gpu/drm/i915/intel_guc.h +++ b/drivers/gpu/drm/i915/intel_guc.h @@ -166,5 +166,5 @@ int i915_guc_submission_enable(struct drm_i915_private *dev_priv); int i915_guc_wq_check_space(struct drm_i915_gem_request *rq); void i915_guc_submission_disable(struct drm_i915_private *dev_priv); void i915_guc_submission_fini(struct drm_i915_private *dev_priv); - +int intel_is_guc_valid(struct drm_device *dev); #endif diff --git a/drivers/gpu/drm/i915/intel_guc_loader.c b/drivers/gpu/drm/i915/intel_guc_loader.c index e24847f..e99278f 100644 --- a/drivers/gpu/drm/i915/intel_guc_loader.c +++ b/drivers/gpu/drm/i915/intel_guc_loader.c @@ -782,3 +782,22 @@ void intel_guc_fini(struct drm_device *dev) guc_fw->fetch_status = UC_FIRMWARE_NONE; } + +/** + * intel_is_guc_valid() - Check to see if the GuC is fully loaded. + * @dev: drm dedvice to check. + * + * This function will return true if the guc has been loaded and + * has valid firmware. + */ +int intel_is_guc_valid(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = to_i915(dev); + struct intel_uc_fw *guc_fw = &dev_priv->guc.guc_fw; + + if (guc_fw->load_status == UC_FIRMWARE_SUCCESS) + return 1; + else + return 0; +} + diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index 452629d..ff8ce86 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -387,6 +387,7 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_HAS_EXEC_SOFTPIN 37 #define I915_PARAM_HAS_POOLED_EU 38 #define I915_PARAM_MIN_EU_IN_POOL 39 +#define I915_PARAM_HAS_GUC 41 typedef struct drm_i915_getparam { __s32 param; -- 1.9.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] drm/i915/get_params: Add HuC status to getparams 2016-08-16 11:18 [PATCH 0/2] HuC/GuC status to Get Params Peter Antoine 2016-08-16 11:18 ` [PATCH 1/2] drm/i915/get_params: Add GuC status to getparams Peter Antoine @ 2016-08-16 11:18 ` Peter Antoine 2016-08-16 11:36 ` Tvrtko Ursulin 2016-08-16 11:58 ` ✗ Ro.CI.BAT: failure for HuC/GuC status to Get Params Patchwork 2 siblings, 1 reply; 6+ messages in thread From: Peter Antoine @ 2016-08-16 11:18 UTC (permalink / raw) To: intel-gfx This patch will allow for getparams to return the status of the HuC. As the HuC has to be validated by the GuC this patch uses the validated status to show when the HuC is loaded and ready for use. You cannot use the loaded status as with the GuC as the HuC is verified after it is loaded and is not usable until it is verified. Signed-off-by: Peter Antoine <peter.antoine@intel.com> --- drivers/gpu/drm/i915/i915_drv.c | 4 ++++ drivers/gpu/drm/i915/intel_huc.h | 2 +- drivers/gpu/drm/i915/intel_huc_loader.c | 21 +++++++++++++++++++++ include/uapi/drm/i915_drm.h | 1 + 4 files changed, 27 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index c8fc3d0..909297e 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -49,6 +49,7 @@ #include "i915_trace.h" #include "i915_vgpu.h" #include "intel_drv.h" +#include "intel_huc.h" #include "intel_guc.h" static struct drm_driver driver; @@ -355,6 +356,9 @@ static int i915_getparam(struct drm_device *dev, void *data, case I915_PARAM_MIN_EU_IN_POOL: value = INTEL_INFO(dev)->min_eu_in_pool; break; + case I915_PARAM_HAS_HUC: + value = intel_is_huc_valid(dev); + break; case I915_PARAM_HAS_GUC: value = intel_is_guc_valid(dev); break; diff --git a/drivers/gpu/drm/i915/intel_huc.h b/drivers/gpu/drm/i915/intel_huc.h index 946caa7..8c1847a 100644 --- a/drivers/gpu/drm/i915/intel_huc.h +++ b/drivers/gpu/drm/i915/intel_huc.h @@ -40,5 +40,5 @@ extern void intel_huc_init(struct drm_device *dev); extern int intel_huc_load(struct drm_device *dev); extern void intel_huc_auth(struct drm_device *dev); extern void intel_huc_fini(struct drm_device *dev); - +extern int intel_is_huc_valid(struct drm_device *dev); #endif diff --git a/drivers/gpu/drm/i915/intel_huc_loader.c b/drivers/gpu/drm/i915/intel_huc_loader.c index 87a6948..ee42d5e 100644 --- a/drivers/gpu/drm/i915/intel_huc_loader.c +++ b/drivers/gpu/drm/i915/intel_huc_loader.c @@ -273,3 +273,24 @@ void intel_huc_fini(struct drm_device *dev) huc_fw->fetch_status = UC_FIRMWARE_NONE; } + +/** + * intel_is_huc_valid() - Check to see if the HuC is fully loaded. + * @dev: drm dedvice to check. + * + * This function will return true if the guc has been loaded and + * has valid firmware. The simplest way of doing this is to check + * if the HuC has been validated, if so it must have been loaded. + */ +int intel_is_huc_valid(struct drm_device *dev) +{ + int result; + struct drm_i915_private *dev_priv = to_i915(dev); + + intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); + result = ((I915_READ(HUC_STATUS2) & HUC_FW_VERIFIED) != 0); + intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); + + return result; +} + diff --git a/include/uapi/drm/i915_drm.h b/include/uapi/drm/i915_drm.h index ff8ce86..525d040 100644 --- a/include/uapi/drm/i915_drm.h +++ b/include/uapi/drm/i915_drm.h @@ -387,6 +387,7 @@ typedef struct drm_i915_irq_wait { #define I915_PARAM_HAS_EXEC_SOFTPIN 37 #define I915_PARAM_HAS_POOLED_EU 38 #define I915_PARAM_MIN_EU_IN_POOL 39 +#define I915_PARAM_HAS_HUC 40 #define I915_PARAM_HAS_GUC 41 typedef struct drm_i915_getparam { -- 1.9.1 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] drm/i915/get_params: Add HuC status to getparams 2016-08-16 11:18 ` [PATCH 2/2] drm/i915/get_params: Add HuC " Peter Antoine @ 2016-08-16 11:36 ` Tvrtko Ursulin 2016-08-16 11:59 ` Peter Antoine 0 siblings, 1 reply; 6+ messages in thread From: Tvrtko Ursulin @ 2016-08-16 11:36 UTC (permalink / raw) To: Peter Antoine, intel-gfx On 16/08/16 12:18, Peter Antoine wrote: > This patch will allow for getparams to return the status of the HuC. > As the HuC has to be validated by the GuC this patch uses the validated > status to show when the HuC is loaded and ready for use. You cannot use > the loaded status as with the GuC as the HuC is verified after it is > loaded and is not usable until it is verified. > > Signed-off-by: Peter Antoine <peter.antoine@intel.com> > --- > drivers/gpu/drm/i915/i915_drv.c | 4 ++++ > drivers/gpu/drm/i915/intel_huc.h | 2 +- > drivers/gpu/drm/i915/intel_huc_loader.c | 21 +++++++++++++++++++++ > include/uapi/drm/i915_drm.h | 1 + > 4 files changed, 27 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c > index c8fc3d0..909297e 100644 > --- a/drivers/gpu/drm/i915/i915_drv.c > +++ b/drivers/gpu/drm/i915/i915_drv.c > @@ -49,6 +49,7 @@ > #include "i915_trace.h" > #include "i915_vgpu.h" > #include "intel_drv.h" > +#include "intel_huc.h" > #include "intel_guc.h" > > static struct drm_driver driver; > @@ -355,6 +356,9 @@ static int i915_getparam(struct drm_device *dev, void *data, > case I915_PARAM_MIN_EU_IN_POOL: > value = INTEL_INFO(dev)->min_eu_in_pool; > break; > + case I915_PARAM_HAS_HUC: > + value = intel_is_huc_valid(dev); > + break; > case I915_PARAM_HAS_GUC: > value = intel_is_guc_valid(dev); > break; > diff --git a/drivers/gpu/drm/i915/intel_huc.h b/drivers/gpu/drm/i915/intel_huc.h > index 946caa7..8c1847a 100644 > --- a/drivers/gpu/drm/i915/intel_huc.h > +++ b/drivers/gpu/drm/i915/intel_huc.h > @@ -40,5 +40,5 @@ extern void intel_huc_init(struct drm_device *dev); > extern int intel_huc_load(struct drm_device *dev); > extern void intel_huc_auth(struct drm_device *dev); > extern void intel_huc_fini(struct drm_device *dev); > - > +extern int intel_is_huc_valid(struct drm_device *dev); > #endif > diff --git a/drivers/gpu/drm/i915/intel_huc_loader.c b/drivers/gpu/drm/i915/intel_huc_loader.c > index 87a6948..ee42d5e 100644 > --- a/drivers/gpu/drm/i915/intel_huc_loader.c > +++ b/drivers/gpu/drm/i915/intel_huc_loader.c > @@ -273,3 +273,24 @@ void intel_huc_fini(struct drm_device *dev) > > huc_fw->fetch_status = UC_FIRMWARE_NONE; > } > + > +/** > + * intel_is_huc_valid() - Check to see if the HuC is fully loaded. > + * @dev: drm dedvice to check. > + * > + * This function will return true if the guc has been loaded and > + * has valid firmware. The simplest way of doing this is to check > + * if the HuC has been validated, if so it must have been loaded. > + */ > +int intel_is_huc_valid(struct drm_device *dev) > +{ > + int result; > + struct drm_i915_private *dev_priv = to_i915(dev); > + > + intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); > + result = ((I915_READ(HUC_STATUS2) & HUC_FW_VERIFIED) != 0); > + intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); Is there a special reason why it is required to grab all forcewakes? HUC_STATUS2 is 0xd3b0 which appears to be in the media forcewake range already defined for gen9. So I915_READ will already grab that one. Regards, Tvrtko _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/2] drm/i915/get_params: Add HuC status to getparams 2016-08-16 11:36 ` Tvrtko Ursulin @ 2016-08-16 11:59 ` Peter Antoine 0 siblings, 0 replies; 6+ messages in thread From: Peter Antoine @ 2016-08-16 11:59 UTC (permalink / raw) To: Tvrtko Ursulin; +Cc: intel-gfx On Tue, 16 Aug 2016, Tvrtko Ursulin wrote: > > On 16/08/16 12:18, Peter Antoine wrote: >> This patch will allow for getparams to return the status of the HuC. >> As the HuC has to be validated by the GuC this patch uses the validated >> status to show when the HuC is loaded and ready for use. You cannot use >> the loaded status as with the GuC as the HuC is verified after it is >> loaded and is not usable until it is verified. >> >> Signed-off-by: Peter Antoine <peter.antoine@intel.com> >> --- >> drivers/gpu/drm/i915/i915_drv.c | 4 ++++ >> drivers/gpu/drm/i915/intel_huc.h | 2 +- >> drivers/gpu/drm/i915/intel_huc_loader.c | 21 +++++++++++++++++++++ >> include/uapi/drm/i915_drm.h | 1 + >> 4 files changed, 27 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/gpu/drm/i915/i915_drv.c >> b/drivers/gpu/drm/i915/i915_drv.c >> index c8fc3d0..909297e 100644 >> --- a/drivers/gpu/drm/i915/i915_drv.c >> +++ b/drivers/gpu/drm/i915/i915_drv.c >> @@ -49,6 +49,7 @@ >> #include "i915_trace.h" >> #include "i915_vgpu.h" >> #include "intel_drv.h" >> +#include "intel_huc.h" >> #include "intel_guc.h" >> >> static struct drm_driver driver; >> @@ -355,6 +356,9 @@ static int i915_getparam(struct drm_device *dev, void >> *data, >> case I915_PARAM_MIN_EU_IN_POOL: >> value = INTEL_INFO(dev)->min_eu_in_pool; >> break; >> + case I915_PARAM_HAS_HUC: >> + value = intel_is_huc_valid(dev); >> + break; >> case I915_PARAM_HAS_GUC: >> value = intel_is_guc_valid(dev); >> break; >> diff --git a/drivers/gpu/drm/i915/intel_huc.h >> b/drivers/gpu/drm/i915/intel_huc.h >> index 946caa7..8c1847a 100644 >> --- a/drivers/gpu/drm/i915/intel_huc.h >> +++ b/drivers/gpu/drm/i915/intel_huc.h >> @@ -40,5 +40,5 @@ extern void intel_huc_init(struct drm_device *dev); >> extern int intel_huc_load(struct drm_device *dev); >> extern void intel_huc_auth(struct drm_device *dev); >> extern void intel_huc_fini(struct drm_device *dev); >> - >> +extern int intel_is_huc_valid(struct drm_device *dev); >> #endif >> diff --git a/drivers/gpu/drm/i915/intel_huc_loader.c >> b/drivers/gpu/drm/i915/intel_huc_loader.c >> index 87a6948..ee42d5e 100644 >> --- a/drivers/gpu/drm/i915/intel_huc_loader.c >> +++ b/drivers/gpu/drm/i915/intel_huc_loader.c >> @@ -273,3 +273,24 @@ void intel_huc_fini(struct drm_device *dev) >> >> huc_fw->fetch_status = UC_FIRMWARE_NONE; >> } >> + >> +/** >> + * intel_is_huc_valid() - Check to see if the HuC is fully loaded. >> + * @dev: drm dedvice to check. >> + * >> + * This function will return true if the guc has been loaded and >> + * has valid firmware. The simplest way of doing this is to check >> + * if the HuC has been validated, if so it must have been loaded. >> + */ >> +int intel_is_huc_valid(struct drm_device *dev) >> +{ >> + int result; >> + struct drm_i915_private *dev_priv = to_i915(dev); >> + >> + intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); >> + result = ((I915_READ(HUC_STATUS2) & HUC_FW_VERIFIED) != 0); >> + intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); > > Is there a special reason why it is required to grab all forcewakes? > > HUC_STATUS2 is 0xd3b0 which appears to be in the media forcewake range > already defined for gen9. So I915_READ will already grab that one. No, was just coping the code from the GuC loader. Will remove the forcewakes. Thanks, Peter. > > Regards, > > Tvrtko > -- Peter Antoine (Android Graphics Driver Software Engineer) --------------------------------------------------------------------- Intel Corporation (UK) Limited Registered No. 1134945 (England) Registered Office: Pipers Way, Swindon SN3 1RJ VAT No: 860 2173 47 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 6+ messages in thread
* ✗ Ro.CI.BAT: failure for HuC/GuC status to Get Params. 2016-08-16 11:18 [PATCH 0/2] HuC/GuC status to Get Params Peter Antoine 2016-08-16 11:18 ` [PATCH 1/2] drm/i915/get_params: Add GuC status to getparams Peter Antoine 2016-08-16 11:18 ` [PATCH 2/2] drm/i915/get_params: Add HuC " Peter Antoine @ 2016-08-16 11:58 ` Patchwork 2 siblings, 0 replies; 6+ messages in thread From: Patchwork @ 2016-08-16 11:58 UTC (permalink / raw) To: Peter Antoine; +Cc: intel-gfx == Series Details == Series: HuC/GuC status to Get Params. URL : https://patchwork.freedesktop.org/series/11158/ State : failure == Summary == Applying: drm/i915/get_params: Add GuC status to getparams Using index info to reconstruct a base tree... M drivers/gpu/drm/i915/i915_drv.c M drivers/gpu/drm/i915/intel_guc.h M drivers/gpu/drm/i915/intel_guc_loader.c M include/uapi/drm/i915_drm.h .git/rebase-apply/patch:67: new blank line at EOF. + warning: 1 line adds whitespace errors. Falling back to patching base and 3-way merge... Auto-merging include/uapi/drm/i915_drm.h Auto-merging drivers/gpu/drm/i915/intel_guc_loader.c Auto-merging drivers/gpu/drm/i915/intel_guc.h Auto-merging drivers/gpu/drm/i915/i915_drv.c Applying: drm/i915/get_params: Add HuC status to getparams Using index info to reconstruct a base tree... M drivers/gpu/drm/i915/i915_drv.c A drivers/gpu/drm/i915/intel_huc.h A drivers/gpu/drm/i915/intel_huc_loader.c M include/uapi/drm/i915_drm.h .git/rebase-apply/patch:69: new blank line at EOF. + warning: 1 line adds whitespace errors. Falling back to patching base and 3-way merge... Auto-merging include/uapi/drm/i915_drm.h CONFLICT (modify/delete): drivers/gpu/drm/i915/intel_huc_loader.c deleted in 95d30385a9c356e2102fdee51b36d1bc7704aba8 and modified in drm/i915/get_params: Add HuC status to getparams. Version drm/i915/get_params: Add HuC status to getparams of drivers/gpu/drm/i915/intel_huc_loader.c left in tree. Auto-merging drivers/gpu/drm/i915/i915_gem.h CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/i915_gem.h Auto-merging drivers/gpu/drm/i915/i915_drv.c error: Failed to merge in the changes. Patch failed at 0002 drm/i915/get_params: Add HuC status to getparams The copy of the patch that failed is found in: .git/rebase-apply/patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-08-16 11:59 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-08-16 11:18 [PATCH 0/2] HuC/GuC status to Get Params Peter Antoine 2016-08-16 11:18 ` [PATCH 1/2] drm/i915/get_params: Add GuC status to getparams Peter Antoine 2016-08-16 11:18 ` [PATCH 2/2] drm/i915/get_params: Add HuC " Peter Antoine 2016-08-16 11:36 ` Tvrtko Ursulin 2016-08-16 11:59 ` Peter Antoine 2016-08-16 11:58 ` ✗ Ro.CI.BAT: failure for HuC/GuC status to Get Params Patchwork
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.