* [U-Boot] [PATCH] mmc: rockchip_sdhci: add clock init for mmc @ 2016-10-07 9:23 ` Kever Yang 2016-10-09 23:01 ` Jaehoon Chung 0 siblings, 1 reply; 3+ messages in thread From: Kever Yang @ 2016-10-07 9:23 UTC (permalink / raw) To: u-boot Init the clock rate to CONFIG_ROCKCHIP_SDHCI_MAX_FREQ with clock driver api. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> --- drivers/mmc/rockchip_sdhci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c index c56e1a3..e787343 100644 --- a/drivers/mmc/rockchip_sdhci.c +++ b/drivers/mmc/rockchip_sdhci.c @@ -12,6 +12,7 @@ #include <libfdt.h> #include <malloc.h> #include <sdhci.h> +#include <clk.h> /* 400KHz is max freq for card ID etc. Use that as min */ #define EMMC_MIN_FREQ 400000 @@ -33,7 +34,10 @@ static int arasan_sdhci_probe(struct udevice *dev) struct rockchip_sdhc *prv = dev_get_priv(dev); struct sdhci_host *host = &prv->host; int ret; + struct clk clk; + ret = clk_get_by_index(dev, 0, &clk); + clk_set_rate(&clk, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ); host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD; ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ, -- 1.9.1 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] mmc: rockchip_sdhci: add clock init for mmc 2016-10-07 9:23 ` [U-Boot] [PATCH] mmc: rockchip_sdhci: add clock init for mmc Kever Yang @ 2016-10-09 23:01 ` Jaehoon Chung 2016-10-10 6:40 ` Kever Yang 0 siblings, 1 reply; 3+ messages in thread From: Jaehoon Chung @ 2016-10-09 23:01 UTC (permalink / raw) To: u-boot On 10/07/2016 06:23 PM, Kever Yang wrote: > Init the clock rate to CONFIG_ROCKCHIP_SDHCI_MAX_FREQ with clock driver > api. > > Signed-off-by: Kever Yang <kever.yang@rock-chips.com> > --- > > drivers/mmc/rockchip_sdhci.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c > index c56e1a3..e787343 100644 > --- a/drivers/mmc/rockchip_sdhci.c > +++ b/drivers/mmc/rockchip_sdhci.c > @@ -12,6 +12,7 @@ > #include <libfdt.h> > #include <malloc.h> > #include <sdhci.h> > +#include <clk.h> > > /* 400KHz is max freq for card ID etc. Use that as min */ > #define EMMC_MIN_FREQ 400000 > @@ -33,7 +34,10 @@ static int arasan_sdhci_probe(struct udevice *dev) > struct rockchip_sdhc *prv = dev_get_priv(dev); > struct sdhci_host *host = &prv->host; > int ret; > + struct clk clk; > > + ret = clk_get_by_index(dev, 0, &clk); What purpose do you use "ret" value? Best Regards, Jaehoon Chung > + clk_set_rate(&clk, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ); > host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD; > > ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ, > ^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH] mmc: rockchip_sdhci: add clock init for mmc 2016-10-09 23:01 ` Jaehoon Chung @ 2016-10-10 6:40 ` Kever Yang 0 siblings, 0 replies; 3+ messages in thread From: Kever Yang @ 2016-10-10 6:40 UTC (permalink / raw) To: u-boot Hi Jaehoon, On 10/10/2016 07:01 AM, Jaehoon Chung wrote: > On 10/07/2016 06:23 PM, Kever Yang wrote: >> Init the clock rate to CONFIG_ROCKCHIP_SDHCI_MAX_FREQ with clock driver >> api. >> >> Signed-off-by: Kever Yang <kever.yang@rock-chips.com> >> --- >> >> drivers/mmc/rockchip_sdhci.c | 4 ++++ >> 1 file changed, 4 insertions(+) >> >> diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c >> index c56e1a3..e787343 100644 >> --- a/drivers/mmc/rockchip_sdhci.c >> +++ b/drivers/mmc/rockchip_sdhci.c >> @@ -12,6 +12,7 @@ >> #include <libfdt.h> >> #include <malloc.h> >> #include <sdhci.h> >> +#include <clk.h> >> >> /* 400KHz is max freq for card ID etc. Use that as min */ >> #define EMMC_MIN_FREQ 400000 >> @@ -33,7 +34,10 @@ static int arasan_sdhci_probe(struct udevice *dev) >> struct rockchip_sdhc *prv = dev_get_priv(dev); >> struct sdhci_host *host = &prv->host; >> int ret; >> + struct clk clk; >> >> + ret = clk_get_by_index(dev, 0, &clk); > What purpose do you use "ret" value? Forgot to do the error check with 'ret', will add it at V2. Thanks, - Kever > > Best Regards, > Jaehoon Chung > >> + clk_set_rate(&clk, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ); >> host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD; >> >> ret = sdhci_setup_cfg(&plat->cfg, host, CONFIG_ROCKCHIP_SDHCI_MAX_FREQ, >> > > > ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-10-10 6:40 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20161007092411epcas1p431c3976e72dd78d2def7b9afde578d02@epcas1p4.samsung.com>
2016-10-07 9:23 ` [U-Boot] [PATCH] mmc: rockchip_sdhci: add clock init for mmc Kever Yang
2016-10-09 23:01 ` Jaehoon Chung
2016-10-10 6:40 ` Kever Yang
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.