All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hiep Cao Minh <cm-hiep@jinso.co.jp>
To: Mark Brown <broonie@kernel.org>
Cc: geert+renesas@glider.be, linux-spi@vger.kernel.org,
	kuninori.morimoto.gx@renesas.com,
	yoshihiro.shimoda.uh@renesas.com, ryusuke.sakato.bx@renesas.com,
	linux-renesas-soc@vger.kernel.org, nv-dung@jinso.co.jp,
	h-inayoshi@jinso.co.jp
Subject: Re: Applied "spi: rspi: supports 32bytes buffer for DUAL and QUAD" to the spi tree
Date: Mon, 07 Nov 2016 09:20:38 +0900	[thread overview]
Message-ID: <581FC8D6.1010703@jinso.co.jp> (raw)
In-Reply-To: <E1c2iDN-0006rC-Am@finisterre>

Hi Mark,

On 11/05/2016 02:23 AM, Mark Brown wrote:
> The patch
>
>     spi: rspi: supports 32bytes buffer for DUAL and QUAD
>
> has been applied to the spi tree at
>
>     git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git

Thanks,

Best regards,
Jinzai Solution Inc.
Hiep.

> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.
>
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
>
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.
>
> Please add any relevant lists and maintainers to the CCs when replying
> to this mail.
>
> Thanks,
> Mark
>
> >From 3be09bec42a800d4f8ead8119c462f3eb4fad435 Mon Sep 17 00:00:00 2001
> From: Hiep Cao Minh <cm-hiep@jinso.co.jp>
> Date: Fri, 4 Nov 2016 17:38:54 +0900
> Subject: [PATCH] spi: rspi: supports 32bytes buffer for DUAL and QUAD
>
> This patch supports 32bytes of buffer for DUAL and QUAD in QSPI by
> Using Transmit/Receive Buffer Data Triggering Number.
> In order to improve the DUAL and QUAD's performance of SPI
> while transferring data in PIO mode, it sends/receives each 32bytes
> data instead of each byte data as current situation.
>
> Signed-off-by: Hiep Cao Minh <cm-hiep@jinso.co.jp>
> Signed-off-by: Mark Brown <broonie@kernel.org>
> ---
>   drivers/spi/spi-rspi.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++---
>   1 file changed, 49 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
> index a816f07e168e..3bab75ab1b25 100644
> --- a/drivers/spi/spi-rspi.c
> +++ b/drivers/spi/spi-rspi.c
> @@ -413,7 +413,7 @@ static unsigned int qspi_set_send_trigger(struct rspi_data *rspi,
>   	return n;
>   }
>   
> -static void qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
> +static int qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
>   {
>   	unsigned int n;
>   
> @@ -428,6 +428,7 @@ static void qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
>   		qspi_update(rspi, SPBFCR_RXTRG_MASK,
>   			     SPBFCR_RXTRG_1B, QSPI_SPBFCR);
>   	}
> +	return n;
>   }
>   
>   #define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
> @@ -514,6 +515,51 @@ static int rspi_pio_transfer(struct rspi_data *rspi, const u8 *tx, u8 *rx,
>   	return 0;
>   }
>   
> +static int rspi_pio_transfer_in_or_our(struct rspi_data *rspi, const u8 *tx,
> +				       u8 *rx, unsigned int n)
> +{
> +	unsigned int i, len;
> +	int ret;
> +
> +	while (n > 0) {
> +		if (tx) {
> +			len = qspi_set_send_trigger(rspi, n);
> +			if (len == QSPI_BUFFER_SIZE) {
> +				ret = rspi_wait_for_tx_empty(rspi);
> +				if (ret < 0) {
> +					dev_err(&rspi->master->dev, "transmit timeout\n");
> +					return ret;
> +				}
> +				for (i = 0; i < len; i++)
> +					rspi_write_data(rspi, *tx++);
> +			} else {
> +				ret = rspi_pio_transfer(rspi, tx, NULL, n);
> +				if (ret < 0)
> +					return ret;
> +			}
> +		}
> +		if (rx) {
> +			len = qspi_set_receive_trigger(rspi, n);
> +			if (len == QSPI_BUFFER_SIZE) {
> +				ret = rspi_wait_for_rx_full(rspi);
> +				if (ret < 0) {
> +					dev_err(&rspi->master->dev, "receive timeout\n");
> +					return ret;
> +				}
> +				for (i = 0; i < len; i++)
> +					*rx++ = rspi_read_data(rspi);
> +			} else {
> +				ret = rspi_pio_transfer(rspi, NULL, rx, n);
> +				if (ret < 0)
> +					return ret;
> +				*rx++ = ret;
> +			}
> +		}
> +		n -= len;
> +	}
> +	return 0;
> +}
> +
>   static void rspi_dma_complete(void *arg)
>   {
>   	struct rspi_data *rspi = arg;
> @@ -793,7 +839,7 @@ static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
>   			return ret;
>   	}
>   
> -	ret = rspi_pio_transfer(rspi, xfer->tx_buf, NULL, xfer->len);
> +	ret = rspi_pio_transfer_in_or_our(rspi, xfer->tx_buf, NULL, xfer->len);
>   	if (ret < 0)
>   		return ret;
>   
> @@ -811,7 +857,7 @@ static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
>   			return ret;
>   	}
>   
> -	return rspi_pio_transfer(rspi, NULL, xfer->rx_buf, xfer->len);
> +	return rspi_pio_transfer_in_or_our(rspi, NULL, xfer->rx_buf, xfer->len);
>   }
>   
>   static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,

WARNING: multiple messages have this Message-ID (diff)
From: Hiep Cao Minh <cm-hiep-HEF513clHfp3+QwDJ9on6Q@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org,
	yoshihiro.shimoda.uh-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org,
	ryusuke.sakato.bx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org,
	linux-renesas-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	nv-dung-HEF513clHfp3+QwDJ9on6Q@public.gmane.org,
	h-inayoshi-HEF513clHfp3+QwDJ9on6Q@public.gmane.org
Subject: Re: Applied "spi: rspi: supports 32bytes buffer for DUAL and QUAD" to the spi tree
Date: Mon, 07 Nov 2016 09:20:38 +0900	[thread overview]
Message-ID: <581FC8D6.1010703@jinso.co.jp> (raw)
In-Reply-To: <E1c2iDN-0006rC-Am@finisterre>

Hi Mark,

On 11/05/2016 02:23 AM, Mark Brown wrote:
> The patch
>
>     spi: rspi: supports 32bytes buffer for DUAL and QUAD
>
> has been applied to the spi tree at
>
>     git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git

Thanks,

Best regards,
Jinzai Solution Inc.
Hiep.

> All being well this means that it will be integrated into the linux-next
> tree (usually sometime in the next 24 hours) and sent to Linus during
> the next merge window (or sooner if it is a bug fix), however if
> problems are discovered then the patch may be dropped or reverted.
>
> You may get further e-mails resulting from automated or manual testing
> and review of the tree, please engage with people reporting problems and
> send followup patches addressing any issues that are reported if needed.
>
> If any updates are required or you are submitting further changes they
> should be sent as incremental updates against current git, existing
> patches will not be replaced.
>
> Please add any relevant lists and maintainers to the CCs when replying
> to this mail.
>
> Thanks,
> Mark
>
> >From 3be09bec42a800d4f8ead8119c462f3eb4fad435 Mon Sep 17 00:00:00 2001
> From: Hiep Cao Minh <cm-hiep-HEF513clHfp3+QwDJ9on6Q@public.gmane.org>
> Date: Fri, 4 Nov 2016 17:38:54 +0900
> Subject: [PATCH] spi: rspi: supports 32bytes buffer for DUAL and QUAD
>
> This patch supports 32bytes of buffer for DUAL and QUAD in QSPI by
> Using Transmit/Receive Buffer Data Triggering Number.
> In order to improve the DUAL and QUAD's performance of SPI
> while transferring data in PIO mode, it sends/receives each 32bytes
> data instead of each byte data as current situation.
>
> Signed-off-by: Hiep Cao Minh <cm-hiep-HEF513clHfp3+QwDJ9on6Q@public.gmane.org>
> Signed-off-by: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
>   drivers/spi/spi-rspi.c | 52 +++++++++++++++++++++++++++++++++++++++++++++++---
>   1 file changed, 49 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
> index a816f07e168e..3bab75ab1b25 100644
> --- a/drivers/spi/spi-rspi.c
> +++ b/drivers/spi/spi-rspi.c
> @@ -413,7 +413,7 @@ static unsigned int qspi_set_send_trigger(struct rspi_data *rspi,
>   	return n;
>   }
>   
> -static void qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
> +static int qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
>   {
>   	unsigned int n;
>   
> @@ -428,6 +428,7 @@ static void qspi_set_receive_trigger(struct rspi_data *rspi, unsigned int len)
>   		qspi_update(rspi, SPBFCR_RXTRG_MASK,
>   			     SPBFCR_RXTRG_1B, QSPI_SPBFCR);
>   	}
> +	return n;
>   }
>   
>   #define set_config_register(spi, n) spi->ops->set_config_register(spi, n)
> @@ -514,6 +515,51 @@ static int rspi_pio_transfer(struct rspi_data *rspi, const u8 *tx, u8 *rx,
>   	return 0;
>   }
>   
> +static int rspi_pio_transfer_in_or_our(struct rspi_data *rspi, const u8 *tx,
> +				       u8 *rx, unsigned int n)
> +{
> +	unsigned int i, len;
> +	int ret;
> +
> +	while (n > 0) {
> +		if (tx) {
> +			len = qspi_set_send_trigger(rspi, n);
> +			if (len == QSPI_BUFFER_SIZE) {
> +				ret = rspi_wait_for_tx_empty(rspi);
> +				if (ret < 0) {
> +					dev_err(&rspi->master->dev, "transmit timeout\n");
> +					return ret;
> +				}
> +				for (i = 0; i < len; i++)
> +					rspi_write_data(rspi, *tx++);
> +			} else {
> +				ret = rspi_pio_transfer(rspi, tx, NULL, n);
> +				if (ret < 0)
> +					return ret;
> +			}
> +		}
> +		if (rx) {
> +			len = qspi_set_receive_trigger(rspi, n);
> +			if (len == QSPI_BUFFER_SIZE) {
> +				ret = rspi_wait_for_rx_full(rspi);
> +				if (ret < 0) {
> +					dev_err(&rspi->master->dev, "receive timeout\n");
> +					return ret;
> +				}
> +				for (i = 0; i < len; i++)
> +					*rx++ = rspi_read_data(rspi);
> +			} else {
> +				ret = rspi_pio_transfer(rspi, NULL, rx, n);
> +				if (ret < 0)
> +					return ret;
> +				*rx++ = ret;
> +			}
> +		}
> +		n -= len;
> +	}
> +	return 0;
> +}
> +
>   static void rspi_dma_complete(void *arg)
>   {
>   	struct rspi_data *rspi = arg;
> @@ -793,7 +839,7 @@ static int qspi_transfer_out(struct rspi_data *rspi, struct spi_transfer *xfer)
>   			return ret;
>   	}
>   
> -	ret = rspi_pio_transfer(rspi, xfer->tx_buf, NULL, xfer->len);
> +	ret = rspi_pio_transfer_in_or_our(rspi, xfer->tx_buf, NULL, xfer->len);
>   	if (ret < 0)
>   		return ret;
>   
> @@ -811,7 +857,7 @@ static int qspi_transfer_in(struct rspi_data *rspi, struct spi_transfer *xfer)
>   			return ret;
>   	}
>   
> -	return rspi_pio_transfer(rspi, NULL, xfer->rx_buf, xfer->len);
> +	return rspi_pio_transfer_in_or_our(rspi, NULL, xfer->rx_buf, xfer->len);
>   }
>   
>   static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2016-11-07  0:20 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-04  8:38 [PATCH 0/1] ARM: spi supports 32bytes buffer for DUAL and QUAD Cao Minh Hiep
2016-11-04  8:38 ` [PATCH 1/1] " Cao Minh Hiep
2016-11-04  8:38   ` Cao Minh Hiep
2016-11-04 17:06   ` Mark Brown
2016-11-04 17:23   ` Applied "spi: rspi: supports 32bytes buffer for DUAL and QUAD" to the spi tree Mark Brown
2016-11-07  0:20     ` Hiep Cao Minh [this message]
2016-11-07  0:20       ` Hiep Cao Minh
2016-11-05  7:32   ` [PATCH 1/1] ARM: spi supports 32bytes buffer for DUAL and QUAD Niklas Söderlund
2016-11-05  7:32     ` Niklas Söderlund
2016-11-07  0:27     ` Hiep Cao Minh
2016-11-07  0:27       ` Hiep Cao Minh
2016-11-04 15:49 ` [PATCH 0/1] " Mark Brown
2016-11-04 15:49   ` Mark Brown
2016-11-07  0:17   ` Hiep Cao Minh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=581FC8D6.1010703@jinso.co.jp \
    --to=cm-hiep@jinso.co.jp \
    --cc=broonie@kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=h-inayoshi@jinso.co.jp \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=nv-dung@jinso.co.jp \
    --cc=ryusuke.sakato.bx@renesas.com \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.