From: Kishon Vijay Abraham I <kishon@ti.com>
To: Nicolae Rosia <Nicolae_Rosia@mentor.com>
Cc: linux-kernel@vger.kernel.org, Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-omap@vger.kernel.org,
Tony Lindgren <tony@atomide.com>
Subject: Re: [PATCH] phy: twl4030-usb: make driver DT only
Date: Tue, 15 Nov 2016 18:50:18 +0530 [thread overview]
Message-ID: <582B0B92.6050209@ti.com> (raw)
In-Reply-To: <1478947191-30532-1-git-send-email-Nicolae_Rosia@mentor.com>
Hi,
On Saturday 12 November 2016 04:09 PM, Nicolae Rosia wrote:
> All users are DT-only and it makes no sense to keep
> unused code
Are you sure about this? I still see a bunch of board files in mach-omap2 using
twl4030.
Thanks
Kishon
>
> Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com>
> ---
> drivers/phy/Kconfig | 1 +
> drivers/phy/phy-twl4030-usb.c | 22 +++++++---------------
> 2 files changed, 8 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index fe00f91..265391e 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -196,6 +196,7 @@ config TWL4030_USB
> depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> depends on USB_SUPPORT
> depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
> + depends on OF
> select GENERIC_PHY
> select USB_PHY
> help
> diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
> index 87e6334..a5e4927 100644
> --- a/drivers/phy/phy-twl4030-usb.c
> +++ b/drivers/phy/phy-twl4030-usb.c
> @@ -656,7 +656,6 @@ static const struct dev_pm_ops twl4030_usb_pm_ops = {
>
> static int twl4030_usb_probe(struct platform_device *pdev)
> {
> - struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev);
> struct twl4030_usb *twl;
> struct phy *phy;
> int status, err;
> @@ -664,19 +663,17 @@ static int twl4030_usb_probe(struct platform_device *pdev)
> struct device_node *np = pdev->dev.of_node;
> struct phy_provider *phy_provider;
>
> + if (!np) {
> + dev_err(&pdev->dev, "no DT info\n");
> + return -EINVAL;
> + }
> +
> twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
> if (!twl)
> return -ENOMEM;
>
> - if (np)
> - of_property_read_u32(np, "usb_mode",
> - (enum twl4030_usb_mode *)&twl->usb_mode);
> - else if (pdata) {
> - twl->usb_mode = pdata->usb_mode;
> - } else {
> - dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
> - return -EINVAL;
> - }
> + of_property_read_u32(np, "usb_mode",
> + (enum twl4030_usb_mode *)&twl->usb_mode);
>
> otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
> if (!otg)
> @@ -750,11 +747,6 @@ static int twl4030_usb_probe(struct platform_device *pdev)
> return status;
> }
>
> - if (pdata)
> - err = phy_create_lookup(phy, "usb", "musb-hdrc.0");
> - if (err)
> - return err;
> -
> pm_runtime_mark_last_busy(&pdev->dev);
> pm_runtime_put_autosuspend(twl->dev);
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Nicolae Rosia <Nicolae_Rosia@mentor.com>
Cc: <linux-kernel@vger.kernel.org>, Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
<linux-usb@vger.kernel.org>, <linux-omap@vger.kernel.org>,
Tony Lindgren <tony@atomide.com>
Subject: Re: [PATCH] phy: twl4030-usb: make driver DT only
Date: Tue, 15 Nov 2016 18:50:18 +0530 [thread overview]
Message-ID: <582B0B92.6050209@ti.com> (raw)
In-Reply-To: <1478947191-30532-1-git-send-email-Nicolae_Rosia@mentor.com>
Hi,
On Saturday 12 November 2016 04:09 PM, Nicolae Rosia wrote:
> All users are DT-only and it makes no sense to keep
> unused code
Are you sure about this? I still see a bunch of board files in mach-omap2 using
twl4030.
Thanks
Kishon
>
> Signed-off-by: Nicolae Rosia <Nicolae_Rosia@mentor.com>
> ---
> drivers/phy/Kconfig | 1 +
> drivers/phy/phy-twl4030-usb.c | 22 +++++++---------------
> 2 files changed, 8 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index fe00f91..265391e 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -196,6 +196,7 @@ config TWL4030_USB
> depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
> depends on USB_SUPPORT
> depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
> + depends on OF
> select GENERIC_PHY
> select USB_PHY
> help
> diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
> index 87e6334..a5e4927 100644
> --- a/drivers/phy/phy-twl4030-usb.c
> +++ b/drivers/phy/phy-twl4030-usb.c
> @@ -656,7 +656,6 @@ static const struct dev_pm_ops twl4030_usb_pm_ops = {
>
> static int twl4030_usb_probe(struct platform_device *pdev)
> {
> - struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev);
> struct twl4030_usb *twl;
> struct phy *phy;
> int status, err;
> @@ -664,19 +663,17 @@ static int twl4030_usb_probe(struct platform_device *pdev)
> struct device_node *np = pdev->dev.of_node;
> struct phy_provider *phy_provider;
>
> + if (!np) {
> + dev_err(&pdev->dev, "no DT info\n");
> + return -EINVAL;
> + }
> +
> twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
> if (!twl)
> return -ENOMEM;
>
> - if (np)
> - of_property_read_u32(np, "usb_mode",
> - (enum twl4030_usb_mode *)&twl->usb_mode);
> - else if (pdata) {
> - twl->usb_mode = pdata->usb_mode;
> - } else {
> - dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
> - return -EINVAL;
> - }
> + of_property_read_u32(np, "usb_mode",
> + (enum twl4030_usb_mode *)&twl->usb_mode);
>
> otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
> if (!otg)
> @@ -750,11 +747,6 @@ static int twl4030_usb_probe(struct platform_device *pdev)
> return status;
> }
>
> - if (pdata)
> - err = phy_create_lookup(phy, "usb", "musb-hdrc.0");
> - if (err)
> - return err;
> -
> pm_runtime_mark_last_busy(&pdev->dev);
> pm_runtime_put_autosuspend(twl->dev);
>
>
next prev parent reply other threads:[~2016-11-15 13:20 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-12 10:39 [PATCH] phy: twl4030-usb: make driver DT only Nicolae Rosia
2016-11-12 10:39 ` Nicolae Rosia
2016-11-15 13:20 ` Kishon Vijay Abraham I [this message]
2016-11-15 13:20 ` Kishon Vijay Abraham I
2016-11-15 13:26 ` Nicolae Rosia
2016-11-15 15:45 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=582B0B92.6050209@ti.com \
--to=kishon@ti.com \
--cc=Nicolae_Rosia@mentor.com \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.