All of lore.kernel.org
 help / color / mirror / Atom feed
From: walter harms <wharms@bfs.de>
To: Brian Masney <masneyb@onstation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Eva Rachel Retuya <eraretuya@gmail.com>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	kernel-janitors@vger.kernel.org
Subject: Re: [patch] iio: tsl2583: make array large enough
Date: Fri, 25 Nov 2016 08:53:29 +0000	[thread overview]
Message-ID: <5837FC09.7010902@bfs.de> (raw)
In-Reply-To: <20161124175126.GA3088@basecamp.onstation.org>



Am 24.11.2016 18:51, schrieb Brian Masney:
> On Thu, Nov 24, 2016 at 05:54:17PM +0100, walter harms wrote:
>>
>>
>> Am 24.11.2016 16:48, schrieb Brian Masney:
>>> On Thu, Nov 24, 2016 at 04:38:07PM +0300, Dan Carpenter wrote:
>>>> This array is supposed to have 10 elements.  Smatch complains that with
>>>> the current code we can have n = max_ints and read beyond the end of
>>>> the array.
>>>>
>>>> Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver")
>>>> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
>>>>
>>>> diff --git a/drivers/iio/light/tsl2583.c b/drivers/iio/light/tsl2583.c
>>>> index 0b87f6a..a78b602 100644
>>>> --- a/drivers/iio/light/tsl2583.c
>>>> +++ b/drivers/iio/light/tsl2583.c
>>>> @@ -565,7 +565,7 @@ static ssize_t in_illuminance_lux_table_store(struct device *dev,
>>>>  	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>>>>  	struct tsl2583_chip *chip = iio_priv(indio_dev);
>>>>  	const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3;
>>>> -	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3];
>>>> +	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3 + 1];
>>>>  	int ret = -EINVAL;
>>>>  	unsigned int n;
>>>>  
>>>
>>
>> sorry i did not notice that bevor ..
>> there is a
>>   max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3
>>
>> IMHO this should read either:
>>    int value[max_ints+1];
> 
> I originally went this route when I refactored the function, however
> running make C=1 yields the following warnings:
> 
> drivers/iio/light/tsl2583.c:568:19: warning: Variable length array is
> used.
> drivers/iio/light/tsl2583.c:574:26: error: cannot size expression
> 
> That is why I went with the current implementation.
> 
>> or
>>   max_ints=ARRAY_SIZE(value)-1;
>>
>> (my personal favorite is dropping max_ints completely).
> 
> The max_ints value is also shown in the error message if the user passes
> in too many or too few entries in the per device lux table. I wanted the
> user to see the maximum allowable number without having to dig through
> the kernel source code. Without it, I would have had to duplicate the
> TSL2583_MAX_LUX_TABLE_ENTRIES * 3 statement a third time.
> 
> Brian
> 


Hello Brian, thanks for the replay,

i have no problem when people so such things intentional but some times
people do this unintentional. When i review code, i see it as part of my
job to challenge constructs where i get a strange feeling.

re,
 wh



WARNING: multiple messages have this Message-ID (diff)
From: walter harms <wharms@bfs.de>
To: Brian Masney <masneyb@onstation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Eva Rachel Retuya <eraretuya@gmail.com>,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org,
	kernel-janitors@vger.kernel.org
Subject: Re: [patch] iio: tsl2583: make array large enough
Date: Fri, 25 Nov 2016 09:53:29 +0100	[thread overview]
Message-ID: <5837FC09.7010902@bfs.de> (raw)
In-Reply-To: <20161124175126.GA3088@basecamp.onstation.org>



Am 24.11.2016 18:51, schrieb Brian Masney:
> On Thu, Nov 24, 2016 at 05:54:17PM +0100, walter harms wrote:
>>
>>
>> Am 24.11.2016 16:48, schrieb Brian Masney:
>>> On Thu, Nov 24, 2016 at 04:38:07PM +0300, Dan Carpenter wrote:
>>>> This array is supposed to have 10 elements.  Smatch complains that with
>>>> the current code we can have n == max_ints and read beyond the end of
>>>> the array.
>>>>
>>>> Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver")
>>>> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
>>>>
>>>> diff --git a/drivers/iio/light/tsl2583.c b/drivers/iio/light/tsl2583.c
>>>> index 0b87f6a..a78b602 100644
>>>> --- a/drivers/iio/light/tsl2583.c
>>>> +++ b/drivers/iio/light/tsl2583.c
>>>> @@ -565,7 +565,7 @@ static ssize_t in_illuminance_lux_table_store(struct device *dev,
>>>>  	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
>>>>  	struct tsl2583_chip *chip = iio_priv(indio_dev);
>>>>  	const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3;
>>>> -	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3];
>>>> +	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3 + 1];
>>>>  	int ret = -EINVAL;
>>>>  	unsigned int n;
>>>>  
>>>
>>
>> sorry i did not notice that bevor ..
>> there is a
>>   max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3
>>
>> IMHO this should read either:
>>    int value[max_ints+1];
> 
> I originally went this route when I refactored the function, however
> running make C=1 yields the following warnings:
> 
> drivers/iio/light/tsl2583.c:568:19: warning: Variable length array is
> used.
> drivers/iio/light/tsl2583.c:574:26: error: cannot size expression
> 
> That is why I went with the current implementation.
> 
>> or
>>   max_ints=ARRAY_SIZE(value)-1;
>>
>> (my personal favorite is dropping max_ints completely).
> 
> The max_ints value is also shown in the error message if the user passes
> in too many or too few entries in the per device lux table. I wanted the
> user to see the maximum allowable number without having to dig through
> the kernel source code. Without it, I would have had to duplicate the
> TSL2583_MAX_LUX_TABLE_ENTRIES * 3 statement a third time.
> 
> Brian
> 


Hello Brian, thanks for the replay,

i have no problem when people so such things intentional but some times
people do this unintentional. When i review code, i see it as part of my
job to challenge constructs where i get a strange feeling.

re,
 wh

  parent reply	other threads:[~2016-11-25  8:53 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-18 11:51 [patch] iio: tsl2583: off by one in in_illuminance_lux_table_store() Dan Carpenter
2016-11-18 11:51 ` Dan Carpenter
2016-11-18 14:03 ` Brian Masney
2016-11-18 14:03   ` Brian Masney
2016-11-24 13:38   ` [patch] iio: tsl2583: make array large enough Dan Carpenter
2016-11-24 13:38     ` Dan Carpenter
2016-11-24 15:48     ` Brian Masney
2016-11-24 15:48       ` Brian Masney
2016-11-24 16:54       ` walter harms
2016-11-24 16:54         ` walter harms
2016-11-24 17:51         ` Brian Masney
2016-11-24 17:51           ` Brian Masney
2016-11-24 20:12           ` Jonathan Cameron
2016-11-24 20:12             ` Jonathan Cameron
2016-11-25  8:53           ` walter harms [this message]
2016-11-25  8:53             ` walter harms

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5837FC09.7010902@bfs.de \
    --to=wharms@bfs.de \
    --cc=dan.carpenter@oracle.com \
    --cc=eraretuya@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=masneyb@onstation.org \
    --cc=pmeerw@pmeerw.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.