From: "Borah, Chaitanya Kumar" <chaitanya.kumar.borah@intel.com>
To: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>,
<intel-gfx@lists.freedesktop.org>
Cc: <intel-xe@lists.freedesktop.org>, <uma.shankar@intel.com>,
<ankit.k.nautiyal@intel.com>
Subject: Re: [PATCH v8 07/10] drm/i915/vrr: Latch CMRR ratio via atomic commit on debugfs write
Date: Fri, 31 Jul 2026 15:13:35 +0530 [thread overview]
Message-ID: <5837b7e2-ff91-44e2-b232-032df8ae1f39@intel.com> (raw)
In-Reply-To: <20260730105919.3913412-8-mitulkumar.ajitkumar.golani@intel.com>
On 7/30/2026 4:29 PM, Mitul Golani wrote:
> Writing the per-CRTC "intel_vrr_target_refresh_rate" debugfs file only
> updates crtc->force_cmrr, a side channel that is not tracked by the
> atomic state. The requested ratio therefore does not reach the hardware
> until some unrelated commit recomputes the pipe config.
>
> Kick an internal atomic commit for the CRTC from the debugfs write and
> mark the CRTC mode as changed so the pipe config is recomputed.
>
> Note that this commit may or may not be downgraded to a fastset,
> depending on whether the computed vblank value (with LRR disabled)
> changes, so it is not characterised as a fastset.
>
> If the commit fails, restore the previous numerator/denominator so that
> force_cmrr does not hold on to bad values, which would otherwise make
> all subsequent commits fail.
>
> --v2:
> - Commit message and code comment update (Chaitanya)
> - Commit header update
> - Restore to old known debugfs values when commit fails
> (Chaitanya)
>
LGTM,
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani@intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_vrr.c | 77 ++++++++++++++++++++++++
> 1 file changed, 77 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c
> index f406f34b816e..3463533b1ea1 100644
> --- a/drivers/gpu/drm/i915/display/intel_vrr.c
> +++ b/drivers/gpu/drm/i915/display/intel_vrr.c
> @@ -8,10 +8,12 @@
> #include <linux/seq_file.h>
> #include <linux/string.h>
>
> +#include <drm/drm_atomic.h>
> #include <drm/drm_print.h>
> #include <drm/intel/step.h>
>
> #include "intel_alpm.h"
> +#include "intel_atomic.h"
> #include "intel_cmtg.h"
> #include "intel_crtc.h"
> #include "intel_de.h"
> @@ -1304,12 +1306,67 @@ static int intel_vrr_debugfs_target_rr_open(struct inode *inode, struct file *fi
> return single_open(file, intel_vrr_debugfs_target_rr_show, inode->i_private);
> }
>
> +/*
> + * Force an internal commit on @crtc so that a CMRR ratio programmed
> + * via debugfs gets recomputed and latched into hardware.
> + *
> + * CMRR only alters the (average) vtotal. Depending on whether the
> + * computed vblank value (with LRR disabled) changes, this commit may or
> + * may not be downgraded to a fastset.
> + */
> +static int intel_vrr_cmrr_commit_force(struct intel_crtc *crtc)
> +{
> + struct intel_display *display = to_intel_display(crtc);
> + struct drm_modeset_acquire_ctx ctx;
> + struct drm_atomic_commit *state;
> + struct intel_crtc_state *crtc_state;
> + int ret = 0;
> +
> + state = drm_atomic_commit_alloc(display->drm);
> + if (!state)
> + return -ENOMEM;
> +
> + drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
> +
> + state->acquire_ctx = &ctx;
> + to_intel_atomic_state(state)->internal = true;
> +
> +retry:
> + crtc_state = intel_atomic_get_crtc_state(state, crtc);
> + if (IS_ERR(crtc_state)) {
> + ret = PTR_ERR(crtc_state);
> + goto out;
> + }
> +
> + if (!crtc_state->hw.active)
> + goto out;
> +
> + /* Mark mode as changed to trigger a pipe recompute + update() */
> + crtc_state->uapi.mode_changed = true;
> +
> + ret = drm_atomic_commit(state);
> +out:
> + if (ret == -EDEADLK) {
> + drm_atomic_commit_clear(state);
> + ret = drm_modeset_backoff(&ctx);
> + if (!ret)
> + goto retry;
> + }
> +
> + drm_modeset_drop_locks(&ctx);
> + drm_modeset_acquire_fini(&ctx);
> + drm_atomic_commit_put(state);
> +
> + return ret;
> +}
> +
> static ssize_t intel_vrr_debugfs_target_rr_write(struct file *file, const char __user *ubuf,
> size_t len, loff_t *offp)
> {
> struct seq_file *m = file->private_data;
> struct intel_crtc *crtc = m->private;
> u32 numerator, denominator;
> + u32 old_numerator, old_denominator;
> char kbuf[32];
> int ret;
>
> @@ -1329,9 +1386,29 @@ static ssize_t intel_vrr_debugfs_target_rr_write(struct file *file, const char _
> crtc->force_cmrr.denominator == denominator)
> return len;
>
> + old_numerator = crtc->force_cmrr.numerator;
> + old_denominator = crtc->force_cmrr.denominator;
> +
> crtc->force_cmrr.numerator = numerator;
> crtc->force_cmrr.denominator = denominator;
>
> + /*
> + * The debugfs value is a side channel that is not tracked by the atomic
> + * state, so kick an internal commit to recompute and latch the
> + * new CMRR parameters.
> + */
> + ret = intel_vrr_cmrr_commit_force(crtc);
> + if (ret) {
> + /*
> + * Restore the last known good ratio so that force_cmrr does not
> + * hold on to bad values, which would make all subsequent commits
> + * fail.
> + */
> + crtc->force_cmrr.numerator = old_numerator;
> + crtc->force_cmrr.denominator = old_denominator;
> + return ret;
> + }
> +
> return len;
> }
>
next prev parent reply other threads:[~2026-07-31 9:43 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-30 10:59 [PATCH v8 00/10] Enable CMRR in fixed-RR VRR path Mitul Golani
2026-07-30 10:59 ` [PATCH v8 01/10] drm/i915/psr: Do not enable PSR2 when CMRR is enabled Mitul Golani
2026-07-30 10:59 ` [PATCH v8 02/10] drm/i915/vrr: Restrict CMRR enable condition to VRR-TG-default platforms Mitul Golani
2026-07-30 10:59 ` [PATCH v8 03/10] drm/i915/vrr: Add per-CRTC vrr/cmrr debugfs control Mitul Golani
2026-07-30 10:59 ` [PATCH v8 04/10] drm/i915/vrr: Update AS_SDP target_rr_divider based on CMRR config request Mitul Golani
2026-07-30 10:59 ` [PATCH v8 05/10] drm/i915/display: Move CMRR crtc_state members under VRR Mitul Golani
2026-07-30 10:59 ` [PATCH v8 06/10] drm/i915/vrr: Compute CMRR fractional timings generically Mitul Golani
2026-07-30 10:59 ` [PATCH v8 07/10] drm/i915/vrr: Latch CMRR ratio via atomic commit on debugfs write Mitul Golani
2026-07-31 9:43 ` Borah, Chaitanya Kumar [this message]
2026-07-30 10:59 ` [PATCH v8 08/10] drm/i915/vrr: Program CMRR enable/disable from transcoder timings Mitul Golani
2026-07-30 10:59 ` [PATCH v8 09/10] drm/i915/vrr: Dump CMRR state in the crtc state dump Mitul Golani
2026-07-30 10:59 ` [PATCH v8 10/10] drm/i915/vrr: Enable cmrr Mitul Golani
2026-07-31 9:45 ` Borah, Chaitanya Kumar
2026-07-30 11:58 ` ✓ CI.KUnit: success for Enable CMRR in fixed-RR VRR path (rev8) Patchwork
2026-07-30 12:45 ` ✓ Xe.CI.BAT: " Patchwork
2026-07-30 13:03 ` ✗ i915.CI.BAT: failure for Enable CMRR in fixed-RR VRR path (rev9) Patchwork
2026-07-30 20:50 ` Golani, Mitulkumar Ajitkumar
2026-07-30 15:22 ` ✓ Xe.CI.FULL: success for Enable CMRR in fixed-RR VRR path (rev8) Patchwork
2026-07-31 4:40 ` ✓ i915.CI.BAT: success for Enable CMRR in fixed-RR VRR path (rev9) Patchwork
2026-07-31 6:54 ` ✓ i915.CI.Full: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5837b7e2-ff91-44e2-b232-032df8ae1f39@intel.com \
--to=chaitanya.kumar.borah@intel.com \
--cc=ankit.k.nautiyal@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=mitulkumar.ajitkumar.golani@intel.com \
--cc=uma.shankar@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.