* [PATCH 1/1] usb: return error code when platform_get_irq fails
@ 2016-11-29 12:57 Pan Bian
[not found] ` <1480424255-25059-1-git-send-email-bianpan2016-9Onoh4P/yGk@public.gmane.org>
0 siblings, 1 reply; 6+ messages in thread
From: Pan Bian @ 2016-11-29 12:57 UTC (permalink / raw)
To: Matthias Brugger, linux-usb; +Cc: linux-kernel, Pan Bian
In function xhci_mtk_probe(), variable ret takes the return value. Its
value should be negative on failures. However, when the call to function
platform_get_irq() fails, it does not set the error code, and 0 will be
returned. 0 indicates no error. As a result, the callers of function
xhci_mtk_probe() will not be able to detect the error. This patch fixes
the bug by assigning the return value of platform_get_irq() to variable
ret if it fails.
Signed-off-by: Pan Bian <bianpan2016@163.com>
---
drivers/usb/host/xhci-mtk.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 79959f1..f2365a4 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -560,8 +560,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
goto disable_ldos;
irq = platform_get_irq(pdev, 0);
- if (irq < 0)
+ if (irq < 0) {
+ ret = irq;
goto disable_clk;
+ }
/* Initialize dma_mask and coherent_dma_mask to 32-bits */
ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] usb: return error code when platform_get_irq fails
2016-11-29 12:57 [PATCH 1/1] usb: return error code when platform_get_irq fails Pan Bian
[not found] ` <1480424255-25059-1-git-send-email-bianpan2016-9Onoh4P/yGk@public.gmane.org>
@ 2016-11-30 13:41 ` Matthias Brugger
0 siblings, 0 replies; 6+ messages in thread
From: Matthias Brugger @ 2016-11-30 13:41 UTC (permalink / raw)
To: Pan Bian, linux-usb-u79uwXL29TY76Z2rM5mHXA, Greg Kroah-Hartman,
Mathias Nyman,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
moderated list:ARM/Mediatek SoC..., Chunfeng Yun
Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA
On 29/11/16 13:57, Pan Bian wrote:
> In function xhci_mtk_probe(), variable ret takes the return value. Its
> value should be negative on failures. However, when the call to function
> platform_get_irq() fails, it does not set the error code, and 0 will be
> returned. 0 indicates no error. As a result, the callers of function
> xhci_mtk_probe() will not be able to detect the error. This patch fixes
> the bug by assigning the return value of platform_get_irq() to variable
> ret if it fails.
>
> Signed-off-by: Pan Bian <bianpan2016-9Onoh4P/yGk@public.gmane.org>
> ---
> drivers/usb/host/xhci-mtk.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> index 79959f1..f2365a4 100644
> --- a/drivers/usb/host/xhci-mtk.c
> +++ b/drivers/usb/host/xhci-mtk.c
> @@ -560,8 +560,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> goto disable_ldos;
>
> irq = platform_get_irq(pdev, 0);
> - if (irq < 0)
> + if (irq < 0) {
> + ret = irq;
> goto disable_clk;
> + }
>
> /* Initialize dma_mask and coherent_dma_mask to 32-bits */
> ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
>
Reviewed-by: Matthias Brugger <matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Next time please make sure to send the patch to all relevant lists and
people (get_maintainer.pl).
Regards,
Matthias
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/1] usb: return error code when platform_get_irq fails
@ 2016-11-30 13:41 ` Matthias Brugger
0 siblings, 0 replies; 6+ messages in thread
From: Matthias Brugger @ 2016-11-30 13:41 UTC (permalink / raw)
To: linux-arm-kernel
On 29/11/16 13:57, Pan Bian wrote:
> In function xhci_mtk_probe(), variable ret takes the return value. Its
> value should be negative on failures. However, when the call to function
> platform_get_irq() fails, it does not set the error code, and 0 will be
> returned. 0 indicates no error. As a result, the callers of function
> xhci_mtk_probe() will not be able to detect the error. This patch fixes
> the bug by assigning the return value of platform_get_irq() to variable
> ret if it fails.
>
> Signed-off-by: Pan Bian <bianpan2016@163.com>
> ---
> drivers/usb/host/xhci-mtk.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> index 79959f1..f2365a4 100644
> --- a/drivers/usb/host/xhci-mtk.c
> +++ b/drivers/usb/host/xhci-mtk.c
> @@ -560,8 +560,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> goto disable_ldos;
>
> irq = platform_get_irq(pdev, 0);
> - if (irq < 0)
> + if (irq < 0) {
> + ret = irq;
> goto disable_clk;
> + }
>
> /* Initialize dma_mask and coherent_dma_mask to 32-bits */
> ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Next time please make sure to send the patch to all relevant lists and
people (get_maintainer.pl).
Regards,
Matthias
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] usb: return error code when platform_get_irq fails
@ 2016-11-30 13:41 ` Matthias Brugger
0 siblings, 0 replies; 6+ messages in thread
From: Matthias Brugger @ 2016-11-30 13:41 UTC (permalink / raw)
To: Pan Bian, linux-usb, Greg Kroah-Hartman, Mathias Nyman,
linux-arm-kernel@lists.infradead.org,
moderated list:ARM/Mediatek SoC..., Chunfeng Yun
Cc: linux-kernel
On 29/11/16 13:57, Pan Bian wrote:
> In function xhci_mtk_probe(), variable ret takes the return value. Its
> value should be negative on failures. However, when the call to function
> platform_get_irq() fails, it does not set the error code, and 0 will be
> returned. 0 indicates no error. As a result, the callers of function
> xhci_mtk_probe() will not be able to detect the error. This patch fixes
> the bug by assigning the return value of platform_get_irq() to variable
> ret if it fails.
>
> Signed-off-by: Pan Bian <bianpan2016@163.com>
> ---
> drivers/usb/host/xhci-mtk.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> index 79959f1..f2365a4 100644
> --- a/drivers/usb/host/xhci-mtk.c
> +++ b/drivers/usb/host/xhci-mtk.c
> @@ -560,8 +560,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> goto disable_ldos;
>
> irq = platform_get_irq(pdev, 0);
> - if (irq < 0)
> + if (irq < 0) {
> + ret = irq;
> goto disable_clk;
> + }
>
> /* Initialize dma_mask and coherent_dma_mask to 32-bits */
> ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Next time please make sure to send the patch to all relevant lists and
people (get_maintainer.pl).
Regards,
Matthias
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/1] usb: return error code when platform_get_irq fails
2016-11-30 13:41 ` Matthias Brugger
@ 2016-11-30 14:05 ` Mathias Nyman
-1 siblings, 0 replies; 6+ messages in thread
From: Mathias Nyman @ 2016-11-30 14:05 UTC (permalink / raw)
To: Matthias Brugger, Pan Bian, linux-usb, Greg Kroah-Hartman,
Mathias Nyman, linux-arm-kernel@lists.infradead.org,
moderated list:ARM/Mediatek SoC..., Chunfeng Yun
Cc: linux-kernel
On 30.11.2016 15:41, Matthias Brugger wrote:
>
>
> On 29/11/16 13:57, Pan Bian wrote:
>> In function xhci_mtk_probe(), variable ret takes the return value. Its
>> value should be negative on failures. However, when the call to function
>> platform_get_irq() fails, it does not set the error code, and 0 will be
>> returned. 0 indicates no error. As a result, the callers of function
>> xhci_mtk_probe() will not be able to detect the error. This patch fixes
>> the bug by assigning the return value of platform_get_irq() to variable
>> ret if it fails.
>>
>> Signed-off-by: Pan Bian <bianpan2016@163.com>
>> ---
>> drivers/usb/host/xhci-mtk.c | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
>> index 79959f1..f2365a4 100644
>> --- a/drivers/usb/host/xhci-mtk.c
>> +++ b/drivers/usb/host/xhci-mtk.c
>> @@ -560,8 +560,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
>> goto disable_ldos;
>>
>> irq = platform_get_irq(pdev, 0);
>> - if (irq < 0)
>> + if (irq < 0) {
>> + ret = irq;
>> goto disable_clk;
>> + }
>>
>> /* Initialize dma_mask and coherent_dma_mask to 32-bits */
>> ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
>>
>
>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
>
Thanks, Added to queue
-Mathias
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/1] usb: return error code when platform_get_irq fails
@ 2016-11-30 14:05 ` Mathias Nyman
0 siblings, 0 replies; 6+ messages in thread
From: Mathias Nyman @ 2016-11-30 14:05 UTC (permalink / raw)
To: linux-arm-kernel
On 30.11.2016 15:41, Matthias Brugger wrote:
>
>
> On 29/11/16 13:57, Pan Bian wrote:
>> In function xhci_mtk_probe(), variable ret takes the return value. Its
>> value should be negative on failures. However, when the call to function
>> platform_get_irq() fails, it does not set the error code, and 0 will be
>> returned. 0 indicates no error. As a result, the callers of function
>> xhci_mtk_probe() will not be able to detect the error. This patch fixes
>> the bug by assigning the return value of platform_get_irq() to variable
>> ret if it fails.
>>
>> Signed-off-by: Pan Bian <bianpan2016@163.com>
>> ---
>> drivers/usb/host/xhci-mtk.c | 4 +++-
>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
>> index 79959f1..f2365a4 100644
>> --- a/drivers/usb/host/xhci-mtk.c
>> +++ b/drivers/usb/host/xhci-mtk.c
>> @@ -560,8 +560,10 @@ static int xhci_mtk_probe(struct platform_device *pdev)
>> goto disable_ldos;
>>
>> irq = platform_get_irq(pdev, 0);
>> - if (irq < 0)
>> + if (irq < 0) {
>> + ret = irq;
>> goto disable_clk;
>> + }
>>
>> /* Initialize dma_mask and coherent_dma_mask to 32-bits */
>> ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
>>
>
>
> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
>
Thanks, Added to queue
-Mathias
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2016-11-30 14:05 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-11-29 12:57 [PATCH 1/1] usb: return error code when platform_get_irq fails Pan Bian
[not found] ` <1480424255-25059-1-git-send-email-bianpan2016-9Onoh4P/yGk@public.gmane.org>
2016-11-30 13:41 ` Matthias Brugger
2016-11-30 13:41 ` Matthias Brugger
2016-11-30 13:41 ` Matthias Brugger
2016-11-30 14:05 ` Mathias Nyman
2016-11-30 14:05 ` Mathias Nyman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.