From: Chanwoo Choi <cw00.choi@samsung.com>
To: krzk@kernel.org, javier@osg.samsung.com, kgene@kernel.org,
robh+dt@kernel.org, s.nawrocki@samsung.com,
tomasz.figa@gmail.com
Cc: myungjoo.ham@samsung.com, kyungmin.park@samsung.com,
devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>
Subject: Re: [PATCH v2 1/5] clk: samsung: exynos5433: Set NoC (Network On Chip) clocks as critical
Date: Thu, 15 Dec 2016 13:33:19 +0900 [thread overview]
Message-ID: <58521D0F.5040704@samsung.com> (raw)
In-Reply-To: <1481173091-9728-2-git-send-email-cw00.choi@samsung.com>
Dear Sylwester,
Could you please review this patch?
--
Regards,
Chanwoo Choi
On 2016년 12월 08일 13:58, Chanwoo Choi wrote:
> The ACLK_BUS0/1/2 are used for NoC (Network on Chip). If NoC's clocks are
> disabled, the system halt happen. Following clock must be always enabled.
> - CLK_ACLK_BUS0_400 : NoC's bus clock for PERIC/PERIS/FSYS/MSCL
> - CLK_ACLK_BUS1_400 : NoC's bus clock for MFC/HEVC/G3D
> - CLK_ACLK_BUS2_400 : NoC's bus clock for GSCL/DISP/G2D/CAM0/CAM1/ISP
>
> Also, this patch adds the CLK_SET_RATE_PARENT flag to the CLK_SCLK_JPEG_MSCL
> because this clock should be used for bus frequency scaling. This clock need to
> be changed on the fly with CLK_SET_RATE_PARENT flag.
>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> Cc:linux-clk@vger.kernel.org
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> drivers/clk/samsung/clk-exynos5433.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
> index f096bd7df40c..0db5204c307c 100644
> --- a/drivers/clk/samsung/clk-exynos5433.c
> +++ b/drivers/clk/samsung/clk-exynos5433.c
> @@ -549,10 +549,10 @@
> 29, CLK_IGNORE_UNUSED, 0),
> GATE(CLK_ACLK_BUS0_400, "aclk_bus0_400", "div_aclk_bus0_400",
> ENABLE_ACLK_TOP, 26,
> - CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
> + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
> GATE(CLK_ACLK_BUS1_400, "aclk_bus1_400", "div_aclk_bus1_400",
> ENABLE_ACLK_TOP, 25,
> - CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
> + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
> GATE(CLK_ACLK_IMEM_200, "aclk_imem_200", "div_aclk_imem_266",
> ENABLE_ACLK_TOP, 24,
> CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
> @@ -616,7 +616,7 @@
>
> /* ENABLE_SCLK_TOP_MSCL */
> GATE(CLK_SCLK_JPEG_MSCL, "sclk_jpeg_mscl", "div_sclk_jpeg",
> - ENABLE_SCLK_TOP_MSCL, 0, 0, 0),
> + ENABLE_SCLK_TOP_MSCL, 0, CLK_SET_RATE_PARENT, 0),
>
> /* ENABLE_SCLK_TOP_CAM1 */
> GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "div_sclk_isp_sensor2_b",
> @@ -1382,7 +1382,7 @@ static void __init exynos5433_cmu_cpif_init(struct device_node *np)
> /* ENABLE_ACLK_MIF3 */
> GATE(CLK_ACLK_BUS2_400, "aclk_bus2_400", "div_aclk_bus2_400",
> ENABLE_ACLK_MIF3, 4,
> - CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
> + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
> GATE(CLK_ACLK_DISP_333, "aclk_disp_333", "div_aclk_disp_333",
> ENABLE_ACLK_MIF3, 1,
> CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
>
WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/5] clk: samsung: exynos5433: Set NoC (Network On Chip) clocks as critical
Date: Thu, 15 Dec 2016 13:33:19 +0900 [thread overview]
Message-ID: <58521D0F.5040704@samsung.com> (raw)
In-Reply-To: <1481173091-9728-2-git-send-email-cw00.choi@samsung.com>
Dear Sylwester,
Could you please review this patch?
--
Regards,
Chanwoo Choi
On 2016? 12? 08? 13:58, Chanwoo Choi wrote:
> The ACLK_BUS0/1/2 are used for NoC (Network on Chip). If NoC's clocks are
> disabled, the system halt happen. Following clock must be always enabled.
> - CLK_ACLK_BUS0_400 : NoC's bus clock for PERIC/PERIS/FSYS/MSCL
> - CLK_ACLK_BUS1_400 : NoC's bus clock for MFC/HEVC/G3D
> - CLK_ACLK_BUS2_400 : NoC's bus clock for GSCL/DISP/G2D/CAM0/CAM1/ISP
>
> Also, this patch adds the CLK_SET_RATE_PARENT flag to the CLK_SCLK_JPEG_MSCL
> because this clock should be used for bus frequency scaling. This clock need to
> be changed on the fly with CLK_SET_RATE_PARENT flag.
>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Cc: Tomasz Figa <tomasz.figa@gmail.com>
> Cc: Chanwoo Choi <cw00.choi@samsung.com>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> Cc:linux-clk at vger.kernel.org
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
> drivers/clk/samsung/clk-exynos5433.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
> index f096bd7df40c..0db5204c307c 100644
> --- a/drivers/clk/samsung/clk-exynos5433.c
> +++ b/drivers/clk/samsung/clk-exynos5433.c
> @@ -549,10 +549,10 @@
> 29, CLK_IGNORE_UNUSED, 0),
> GATE(CLK_ACLK_BUS0_400, "aclk_bus0_400", "div_aclk_bus0_400",
> ENABLE_ACLK_TOP, 26,
> - CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
> + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
> GATE(CLK_ACLK_BUS1_400, "aclk_bus1_400", "div_aclk_bus1_400",
> ENABLE_ACLK_TOP, 25,
> - CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
> + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
> GATE(CLK_ACLK_IMEM_200, "aclk_imem_200", "div_aclk_imem_266",
> ENABLE_ACLK_TOP, 24,
> CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
> @@ -616,7 +616,7 @@
>
> /* ENABLE_SCLK_TOP_MSCL */
> GATE(CLK_SCLK_JPEG_MSCL, "sclk_jpeg_mscl", "div_sclk_jpeg",
> - ENABLE_SCLK_TOP_MSCL, 0, 0, 0),
> + ENABLE_SCLK_TOP_MSCL, 0, CLK_SET_RATE_PARENT, 0),
>
> /* ENABLE_SCLK_TOP_CAM1 */
> GATE(CLK_SCLK_ISP_SENSOR2, "sclk_isp_sensor2", "div_sclk_isp_sensor2_b",
> @@ -1382,7 +1382,7 @@ static void __init exynos5433_cmu_cpif_init(struct device_node *np)
> /* ENABLE_ACLK_MIF3 */
> GATE(CLK_ACLK_BUS2_400, "aclk_bus2_400", "div_aclk_bus2_400",
> ENABLE_ACLK_MIF3, 4,
> - CLK_IGNORE_UNUSED | CLK_SET_RATE_PARENT, 0),
> + CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
> GATE(CLK_ACLK_DISP_333, "aclk_disp_333", "div_aclk_disp_333",
> ENABLE_ACLK_MIF3, 1,
> CLK_IS_CRITICAL | CLK_SET_RATE_PARENT, 0),
>
next prev parent reply other threads:[~2016-12-15 4:33 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-08 4:58 [PATCH v2 0/5] arm64: dts: Enable bus frequency scaling on Exynos5433-based TM2 board Chanwoo Choi
2016-12-08 4:58 ` Chanwoo Choi
2016-12-08 4:58 ` [PATCH v2 1/5] clk: samsung: exynos5433: Set NoC (Network On Chip) clocks as critical Chanwoo Choi
2016-12-08 4:58 ` Chanwoo Choi
2016-12-15 4:33 ` Chanwoo Choi [this message]
2016-12-15 4:33 ` Chanwoo Choi
[not found] ` <58521D0F.5040704-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-12-20 10:47 ` Sylwester Nawrocki
2016-12-20 10:47 ` Sylwester Nawrocki
2016-12-20 10:47 ` Sylwester Nawrocki
2016-12-29 15:16 ` Sylwester Nawrocki
[not found] ` <1481173091-9728-1-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2016-12-08 4:58 ` [PATCH v2 2/5] PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433 Chanwoo Choi
2016-12-08 4:58 ` Chanwoo Choi
2016-12-08 4:58 ` Chanwoo Choi
2016-12-08 4:58 ` [PATCH v2 3/5] arm64: dts: exynos5433: Add PPMU dt node Chanwoo Choi
2016-12-08 4:58 ` Chanwoo Choi
[not found] ` <1481173091-9728-4-git-send-email-cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-01-02 18:33 ` Krzysztof Kozlowski
2017-01-02 18:33 ` Krzysztof Kozlowski
2017-01-02 18:33 ` Krzysztof Kozlowski
2016-12-08 4:58 ` [PATCH v2 4/5] arm64: dts: exynos5433: Add bus dt node using VDD_INT for Exynos5433 Chanwoo Choi
2016-12-08 4:58 ` Chanwoo Choi
2016-12-08 17:52 ` Krzysztof Kozlowski
2016-12-08 17:52 ` Krzysztof Kozlowski
2016-12-30 0:59 ` Chanwoo Choi
2016-12-30 0:59 ` Chanwoo Choi
2016-12-30 0:59 ` Chanwoo Choi
2016-12-30 14:51 ` Krzysztof Kozlowski
2016-12-30 14:51 ` Krzysztof Kozlowski
2016-12-30 15:08 ` Chanwoo Choi
2016-12-30 15:08 ` Chanwoo Choi
2017-01-02 18:35 ` Krzysztof Kozlowski
2017-01-02 18:35 ` Krzysztof Kozlowski
2016-12-08 4:58 ` [PATCH v2 5/5] arm64: dts: exynos5433: Add support of bus frequency using VDD_INT on TM2 Chanwoo Choi
2016-12-08 4:58 ` Chanwoo Choi
2017-01-02 18:37 ` Krzysztof Kozlowski
2017-01-02 18:37 ` Krzysztof Kozlowski
2017-01-02 18:37 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=58521D0F.5040704@samsung.com \
--to=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=javier@osg.samsung.com \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=myungjoo.ham@samsung.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
--cc=sboyd@codeaurora.org \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.