From: Chanwoo Choi <cw00.choi@samsung.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
Jaechul Lee <jcsing.lee@samsung.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
Catalin Marinas <catalin.marinas@arm.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Will Deacon <will.deacon@arm.com>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Kukjin Kim <kgene@kernel.org>,
Andi Shyti <andi.shyti@samsung.com>,
linux-input@vger.kernel.org, galaxyra@gmail.com,
beomho.seo@samsung.com, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25
Date: Fri, 06 Jan 2017 16:20:52 +0900 [thread overview]
Message-ID: <586F4554.6020206@samsung.com> (raw)
In-Reply-To: <20170106070539.wd3kfhi77pa5ekcy@kozik-lap>
On 2017년 01월 06일 16:05, Krzysztof Kozlowski wrote:
> On Fri, Jan 06, 2017 at 12:59:05PM +0900, Jaechul Lee wrote:
>> From: Chanwoo Choi <cw00.choi@samsung.com>
>>
>> This patch fixes the wrong information of ldo23 and ldo25 on both TM2 and TM2E.
>
> Please describe what is exactly wrong and how it affects the
> system/user. This is going to the fixes so it needs a good explanation.
When I posted the patch[1], I refer to the old schematic document of both TM2 and TM2E.
[1] 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
After checking the highest version of schematic document of both TM2 and TM2E,
there is no difference of ldo23/ldo25 on both TM2 and TM2E.
- ldo23 is used on TM2/TM2E, but the name/max-microvolt are wrong.
- ldo25 isn't used on TM2/TM2E. (not connected)
Because ldo23 and lod25 are not used on other device in Exynos5433 and TM2 board.
this patch does not affect the operation to system/user.
>
>>
>> Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
>> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
>> ---
>> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 7 ++++---
>> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 10 ----------
>> 2 files changed, 4 insertions(+), 13 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> index 3b5215c..e8971f4 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> @@ -504,9 +504,9 @@
>> };
>>
>> ldo23_reg: LDO23 {
>> - regulator-name = "CAM_SEN_CORE_1.2V_AP";
>> + regulator-name = "CAM_SEN_CORE_1.05V_AP";
>> regulator-min-microvolt = <1050000>;
>> - regulator-max-microvolt = <1200000>;
>> + regulator-max-microvolt = <1050000>;
>> };
>>
>> ldo24_reg: LDO24 {
>> @@ -516,9 +516,10 @@
>> };
>>
>> ldo25_reg: LDO25 {
>> - regulator-name = "CAM_SEN_A2.8V_AP";
>> + regulator-name = "UNUSED_LDO25";
>> regulator-min-microvolt = <2800000>;
>> regulator-max-microvolt = <2800000>;
>> + regulator-always-off;
>
> Don't add it. See my other patch.
OK. After completing the kernel booting, the unused regulators will be off.
>
> Best regards,
> Krzysztof
>
>> };
>>
>> ldo26_reg: LDO26 {
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> index 1db4e7f..854c583 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> @@ -18,16 +18,6 @@
>> compatible = "samsung,tm2e", "samsung,exynos5433";
>> };
>>
>> -&ldo23_reg {
>> - regulator-name = "CAM_SEN_CORE_1.025V_AP";
>> - regulator-max-microvolt = <1050000>;
>> -};
>> -
>> -&ldo25_reg {
>> - regulator-name = "UNUSED_LDO25";
>> - regulator-always-off;
>> -};
>> -
>> &ldo31_reg {
>> regulator-name = "TSP_VDD_1.8V_AP";
>> regulator-min-microvolt = <1800000>;
>> --
>> 2.7.4
>>
>
>
>
--
Best Regards,
Chanwoo Choi
S/W Center, Samsung Electronics
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25
Date: Fri, 06 Jan 2017 16:20:52 +0900 [thread overview]
Message-ID: <586F4554.6020206@samsung.com> (raw)
In-Reply-To: <20170106070539.wd3kfhi77pa5ekcy@kozik-lap>
On 2017? 01? 06? 16:05, Krzysztof Kozlowski wrote:
> On Fri, Jan 06, 2017 at 12:59:05PM +0900, Jaechul Lee wrote:
>> From: Chanwoo Choi <cw00.choi@samsung.com>
>>
>> This patch fixes the wrong information of ldo23 and ldo25 on both TM2 and TM2E.
>
> Please describe what is exactly wrong and how it affects the
> system/user. This is going to the fixes so it needs a good explanation.
When I posted the patch[1], I refer to the old schematic document of both TM2 and TM2E.
[1] 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
After checking the highest version of schematic document of both TM2 and TM2E,
there is no difference of ldo23/ldo25 on both TM2 and TM2E.
- ldo23 is used on TM2/TM2E, but the name/max-microvolt are wrong.
- ldo25 isn't used on TM2/TM2E. (not connected)
Because ldo23 and lod25 are not used on other device in Exynos5433 and TM2 board.
this patch does not affect the operation to system/user.
>
>>
>> Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
>> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
>> ---
>> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 7 ++++---
>> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 10 ----------
>> 2 files changed, 4 insertions(+), 13 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> index 3b5215c..e8971f4 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> @@ -504,9 +504,9 @@
>> };
>>
>> ldo23_reg: LDO23 {
>> - regulator-name = "CAM_SEN_CORE_1.2V_AP";
>> + regulator-name = "CAM_SEN_CORE_1.05V_AP";
>> regulator-min-microvolt = <1050000>;
>> - regulator-max-microvolt = <1200000>;
>> + regulator-max-microvolt = <1050000>;
>> };
>>
>> ldo24_reg: LDO24 {
>> @@ -516,9 +516,10 @@
>> };
>>
>> ldo25_reg: LDO25 {
>> - regulator-name = "CAM_SEN_A2.8V_AP";
>> + regulator-name = "UNUSED_LDO25";
>> regulator-min-microvolt = <2800000>;
>> regulator-max-microvolt = <2800000>;
>> + regulator-always-off;
>
> Don't add it. See my other patch.
OK. After completing the kernel booting, the unused regulators will be off.
>
> Best regards,
> Krzysztof
>
>> };
>>
>> ldo26_reg: LDO26 {
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> index 1db4e7f..854c583 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> @@ -18,16 +18,6 @@
>> compatible = "samsung,tm2e", "samsung,exynos5433";
>> };
>>
>> -&ldo23_reg {
>> - regulator-name = "CAM_SEN_CORE_1.025V_AP";
>> - regulator-max-microvolt = <1050000>;
>> -};
>> -
>> -&ldo25_reg {
>> - regulator-name = "UNUSED_LDO25";
>> - regulator-always-off;
>> -};
>> -
>> &ldo31_reg {
>> regulator-name = "TSP_VDD_1.8V_AP";
>> regulator-min-microvolt = <1800000>;
>> --
>> 2.7.4
>>
>
>
>
--
Best Regards,
Chanwoo Choi
S/W Center, Samsung Electronics
WARNING: multiple messages have this Message-ID (diff)
From: Chanwoo Choi <cw00.choi@samsung.com>
To: Krzysztof Kozlowski <krzk@kernel.org>,
Jaechul Lee <jcsing.lee@samsung.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>, Kukjin Kim <kgene@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>,
Andi Shyti <andi.shyti@samsung.com>,
beomho.seo@samsung.com, galaxyra@gmail.com,
linux-arm-kernel@lists.infradead.org,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25
Date: Fri, 06 Jan 2017 16:20:52 +0900 [thread overview]
Message-ID: <586F4554.6020206@samsung.com> (raw)
In-Reply-To: <20170106070539.wd3kfhi77pa5ekcy@kozik-lap>
On 2017년 01월 06일 16:05, Krzysztof Kozlowski wrote:
> On Fri, Jan 06, 2017 at 12:59:05PM +0900, Jaechul Lee wrote:
>> From: Chanwoo Choi <cw00.choi@samsung.com>
>>
>> This patch fixes the wrong information of ldo23 and ldo25 on both TM2 and TM2E.
>
> Please describe what is exactly wrong and how it affects the
> system/user. This is going to the fixes so it needs a good explanation.
When I posted the patch[1], I refer to the old schematic document of both TM2 and TM2E.
[1] 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
After checking the highest version of schematic document of both TM2 and TM2E,
there is no difference of ldo23/ldo25 on both TM2 and TM2E.
- ldo23 is used on TM2/TM2E, but the name/max-microvolt are wrong.
- ldo25 isn't used on TM2/TM2E. (not connected)
Because ldo23 and lod25 are not used on other device in Exynos5433 and TM2 board.
this patch does not affect the operation to system/user.
>
>>
>> Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
>> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
>> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
>> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
>> ---
>> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 7 ++++---
>> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 10 ----------
>> 2 files changed, 4 insertions(+), 13 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> index 3b5215c..e8971f4 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> @@ -504,9 +504,9 @@
>> };
>>
>> ldo23_reg: LDO23 {
>> - regulator-name = "CAM_SEN_CORE_1.2V_AP";
>> + regulator-name = "CAM_SEN_CORE_1.05V_AP";
>> regulator-min-microvolt = <1050000>;
>> - regulator-max-microvolt = <1200000>;
>> + regulator-max-microvolt = <1050000>;
>> };
>>
>> ldo24_reg: LDO24 {
>> @@ -516,9 +516,10 @@
>> };
>>
>> ldo25_reg: LDO25 {
>> - regulator-name = "CAM_SEN_A2.8V_AP";
>> + regulator-name = "UNUSED_LDO25";
>> regulator-min-microvolt = <2800000>;
>> regulator-max-microvolt = <2800000>;
>> + regulator-always-off;
>
> Don't add it. See my other patch.
OK. After completing the kernel booting, the unused regulators will be off.
>
> Best regards,
> Krzysztof
>
>> };
>>
>> ldo26_reg: LDO26 {
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> index 1db4e7f..854c583 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> @@ -18,16 +18,6 @@
>> compatible = "samsung,tm2e", "samsung,exynos5433";
>> };
>>
>> -&ldo23_reg {
>> - regulator-name = "CAM_SEN_CORE_1.025V_AP";
>> - regulator-max-microvolt = <1050000>;
>> -};
>> -
>> -&ldo25_reg {
>> - regulator-name = "UNUSED_LDO25";
>> - regulator-always-off;
>> -};
>> -
>> &ldo31_reg {
>> regulator-name = "TSP_VDD_1.8V_AP";
>> regulator-min-microvolt = <1800000>;
>> --
>> 2.7.4
>>
>
>
>
--
Best Regards,
Chanwoo Choi
S/W Center, Samsung Electronics
next prev parent reply other threads:[~2017-01-06 7:20 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170106035913epcas5p2b7d66596e467c6169786eea56beb8ffc@epcas5p2.samsung.com>
2017-01-06 3:59 ` [PATCH v3 0/5] Add touch key driver support for TM2 Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 3:59 ` [PATCH v3 1/5] arm64: dts: exynos5433: TM2/E: Fix wrong information of ldo23 and ldo25 Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 7:05 ` Krzysztof Kozlowski
2017-01-06 7:05 ` Krzysztof Kozlowski
2017-01-06 7:05 ` Krzysztof Kozlowski
2017-01-06 7:20 ` Chanwoo Choi [this message]
2017-01-06 7:20 ` Chanwoo Choi
2017-01-06 7:20 ` Chanwoo Choi
2017-01-06 8:50 ` Krzysztof Kozlowski
2017-01-06 8:50 ` Krzysztof Kozlowski
2017-01-06 9:06 ` Chanwoo Choi
2017-01-06 9:06 ` Chanwoo Choi
2017-01-06 9:06 ` Chanwoo Choi
2017-01-06 9:12 ` Krzysztof Kozlowski
2017-01-06 9:12 ` Krzysztof Kozlowski
2017-01-06 9:12 ` Krzysztof Kozlowski
2017-01-06 3:59 ` [PATCH v3 2/5] arm64: dts: exynos: make tm2 and tm2e independent from each other Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 7:09 ` Krzysztof Kozlowski
2017-01-06 7:09 ` Krzysztof Kozlowski
2017-01-06 7:59 ` Andi Shyti
2017-01-06 7:59 ` Andi Shyti
2017-01-06 8:37 ` Krzysztof Kozlowski
2017-01-06 8:37 ` Krzysztof Kozlowski
2017-01-06 9:25 ` Andi Shyti
2017-01-06 9:25 ` Andi Shyti
2017-01-06 9:25 ` Andi Shyti
2017-01-06 3:59 ` [PATCH v3 3/5] input: Add support for the tm2 touchkey device driver Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 3:59 ` [PATCH v3 4/5] input: tm2-touchkey: Add touchkey driver support for TM2 Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 3:59 ` [PATCH v3 5/5] arm64: dts: exynos: Add tm2 touchkey node Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
2017-01-06 3:59 ` Jaechul Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=586F4554.6020206@samsung.com \
--to=cw00.choi@samsung.com \
--cc=andi.shyti@samsung.com \
--cc=beomho.seo@samsung.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=galaxyra@gmail.com \
--cc=javier@osg.samsung.com \
--cc=jcsing.lee@samsung.com \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.