From: Inki Dae <inki.dae@samsung.com>
To: Andi Shyti <andi.shyti@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org, cw00.choi@samsung.com,
devicetree@vger.kernel.org, Donghwa Lee <dh09.lee@samsung.com>,
linux-kernel@vger.kernel.org, krzk@kernel.org,
jh80.chung@samsung.com, kgene@kernel.org,
dri-devel@lists.freedesktop.org,
Hyungwon Hwang <human.hwang@samsung.com>,
Hoegeun Kwon <hoegeun.kwon@samsung.com>
Subject: Re: [PATCH v7 3/4] drm/panel: Add support for S6E3HA2 panel driver on TM2 board
Date: Fri, 06 Jan 2017 17:36:56 +0900 [thread overview]
Message-ID: <586F5728.1010800@samsung.com> (raw)
In-Reply-To: <20170106081806.h4y7o57kjbibau6l@gangnam.samsung>
2017년 01월 06일 17:18에 Andi Shyti 이(가) 쓴 글:
> Hi Inki,
>
> Thanks for the reply, but...
>
>>>> +static const struct drm_display_mode default_mode = {
>>>> + .clock = 222372,
>>>> + .hdisplay = 1440,
>>>> + .hsync_start = 1440 + 1,
>>>> + .hsync_end = 1440 + 1 + 1,
>>>> + .htotal = 1440 + 1 + 1 + 1,
>>>> + .vdisplay = 2560,
>>>> + .vsync_start = 2560 + 1,
>>>> + .vsync_end = 2560 + 1 + 1,
>>>> + .vtotal = 2560 + 1 + 1 + 15,
>>>> + .vrefresh = 60,
>>>> + .flags = 0,
>>>> +};
>>>
>>> how is this working with tm2e? Are these values valid for both
>>> the boards?
>>
>> We don't need to consider tm2e board with two reasones,
>> 1. there is no tm2e board support in mainline
>> 2. the panel on tm2 would be a little bit different from one on tm2e
>
> ... this display in the Tizen Kernel is supported by both:
> tm2 [1] and tm2e [2]. The only differences are:
Why tm2e dts file is in mainline? Seems communication miss with Chanwoo. :(
>
> TM2:
> clock-frequency = <14874444>;
> hactive = <1440>;
>
> TM2E:
> clock-frequency = <16523724>;
> hactive = <1600>;
>
> I don't know much about the differences you mention in point 2,
> but it's a pity to drop support only because we don't want to put
> in the dts the 'hactive', and 'clock-frequency' properties.
Anyway, tm2e board is already in mainline so Panel driver may need to identify what kinds of panel is probed to decide porch values. I think there are relevant registers in MCU of the Panel device to check version or similar thing.
Thanks.
>
> Andi
>
> [1] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts?h=tizen#n1284
> [2] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts?h=tizen#n1270
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> .
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Inki Dae <inki.dae@samsung.com>
To: Andi Shyti <andi.shyti@samsung.com>
Cc: Hoegeun Kwon <hoegeun.kwon@samsung.com>,
robh@kernel.org, thierry.reding@gmail.com, airlied@linux.ie,
kgene@kernel.org, krzk@kernel.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
a.hajda@samsung.com, cw00.choi@samsung.com,
jh80.chung@samsung.com, Donghwa Lee <dh09.lee@samsung.com>,
Hyungwon Hwang <human.hwang@samsung.com>
Subject: Re: [PATCH v7 3/4] drm/panel: Add support for S6E3HA2 panel driver on TM2 board
Date: Fri, 06 Jan 2017 17:36:56 +0900 [thread overview]
Message-ID: <586F5728.1010800@samsung.com> (raw)
In-Reply-To: <20170106081806.h4y7o57kjbibau6l@gangnam.samsung>
2017년 01월 06일 17:18에 Andi Shyti 이(가) 쓴 글:
> Hi Inki,
>
> Thanks for the reply, but...
>
>>>> +static const struct drm_display_mode default_mode = {
>>>> + .clock = 222372,
>>>> + .hdisplay = 1440,
>>>> + .hsync_start = 1440 + 1,
>>>> + .hsync_end = 1440 + 1 + 1,
>>>> + .htotal = 1440 + 1 + 1 + 1,
>>>> + .vdisplay = 2560,
>>>> + .vsync_start = 2560 + 1,
>>>> + .vsync_end = 2560 + 1 + 1,
>>>> + .vtotal = 2560 + 1 + 1 + 15,
>>>> + .vrefresh = 60,
>>>> + .flags = 0,
>>>> +};
>>>
>>> how is this working with tm2e? Are these values valid for both
>>> the boards?
>>
>> We don't need to consider tm2e board with two reasones,
>> 1. there is no tm2e board support in mainline
>> 2. the panel on tm2 would be a little bit different from one on tm2e
>
> ... this display in the Tizen Kernel is supported by both:
> tm2 [1] and tm2e [2]. The only differences are:
Why tm2e dts file is in mainline? Seems communication miss with Chanwoo. :(
>
> TM2:
> clock-frequency = <14874444>;
> hactive = <1440>;
>
> TM2E:
> clock-frequency = <16523724>;
> hactive = <1600>;
>
> I don't know much about the differences you mention in point 2,
> but it's a pity to drop support only because we don't want to put
> in the dts the 'hactive', and 'clock-frequency' properties.
Anyway, tm2e board is already in mainline so Panel driver may need to identify what kinds of panel is probed to decide porch values. I think there are relevant registers in MCU of the Panel device to check version or similar thing.
Thanks.
>
> Andi
>
> [1] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts?h=tizen#n1284
> [2] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts?h=tizen#n1270
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> .
>
next prev parent reply other threads:[~2017-01-06 8:36 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170105102011epcas1p416e0495978dbce7e73e900eb69a4b7ad@epcas1p4.samsung.com>
2017-01-05 10:20 ` [PATCH v7 0/4] Add support for the S6E3HA2 panel on TM2 board Hoegeun Kwon
2017-01-05 10:20 ` Hoegeun Kwon
2017-01-05 10:20 ` [PATCH v7 1/4] drm/exynos: mic: Add mode_set callback function Hoegeun Kwon
2017-01-05 10:20 ` Hoegeun Kwon
[not found] ` <1483611609-23522-2-git-send-email-hoegeun.kwon-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-01-11 5:33 ` Inki Dae
2017-01-11 5:33 ` Inki Dae
[not found] ` <CGME20170105102012epcas5p308c2d3ed269d9bf76f76f1d38422eb54@epcas5p3.samsung.com>
[not found] ` <1483611609-23522-1-git-send-email-hoegeun.kwon-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-01-05 10:20 ` [PATCH v7 2/4] drm/exynos: mic: Fix parse_dt function Hoegeun Kwon
2017-01-05 10:20 ` Hoegeun Kwon
2017-01-05 12:16 ` Andrzej Hajda
2017-01-05 12:16 ` Andrzej Hajda
2017-01-11 5:33 ` Inki Dae
2017-01-11 5:33 ` Inki Dae
2017-01-05 10:20 ` [PATCH v7 3/4] drm/panel: Add support for S6E3HA2 panel driver on TM2 board Hoegeun Kwon
2017-01-05 10:20 ` Hoegeun Kwon
2017-01-05 18:09 ` Krzysztof Kozlowski
[not found] ` <1483611609-23522-4-git-send-email-hoegeun.kwon-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-01-06 5:22 ` Andi Shyti
2017-01-06 5:22 ` Andi Shyti
2017-01-06 5:32 ` Inki Dae
2017-01-06 5:32 ` Inki Dae
[not found] ` <586F2BF3.8080400-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-01-06 8:18 ` Andi Shyti
2017-01-06 8:18 ` Andi Shyti
2017-01-06 8:36 ` Inki Dae [this message]
2017-01-06 8:36 ` Inki Dae
[not found] ` <586F5728.1010800-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-01-09 7:37 ` Andrzej Hajda
2017-01-09 7:37 ` Andrzej Hajda
2017-01-09 9:19 ` Inki Dae
2017-01-09 9:19 ` Inki Dae
2017-01-09 9:53 ` Andrzej Hajda
2017-01-09 9:53 ` Andrzej Hajda
2017-01-10 1:15 ` Inki Dae
2017-01-05 10:20 ` [PATCH v7 4/4] arm64: dts: exynos: Add support for S6E3HA2 panel device " Hoegeun Kwon
2017-01-05 10:20 ` Hoegeun Kwon
[not found] ` <1483611609-23522-5-git-send-email-hoegeun.kwon-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-01-06 4:49 ` Andi Shyti
2017-01-06 4:49 ` Andi Shyti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=586F5728.1010800@samsung.com \
--to=inki.dae@samsung.com \
--cc=andi.shyti@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dh09.lee@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=hoegeun.kwon@samsung.com \
--cc=human.hwang@samsung.com \
--cc=jh80.chung@samsung.com \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.