* [PATCH v2] usb: musb: sunxi: Uses the resource-managed extcon API when registering extcon notifier [not found] <CGME20161230041914epcas5p24826e70fd5de710818687e55579757ba@epcas5p2.samsung.com> @ 2016-12-30 4:19 ` Chanwoo Choi 0 siblings, 0 replies; 6+ messages in thread From: Chanwoo Choi @ 2016-12-30 4:19 UTC (permalink / raw) To: linux-arm-kernel This patch just uses the resource-managed extcon API when registering the extcon notifier. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Bin Liu <b-liu@ti.com> --- Changes from v1: - Rebase this patch based on v4.10-rc1. - Add acked-by tag from Maxime Ripard and Bin Lin. - Drop the phy/power-supply/chipidea patches. drivers/usb/musb/sunxi.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index d0be0eadd0d9..2332294dee0f 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -251,14 +251,14 @@ static int sunxi_musb_init(struct musb *musb) writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); /* Register notifier before calling phy_init() */ - ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, - &glue->host_nb); + ret = devm_extcon_register_notifier(glue->dev, glue->extcon, + EXTCON_USB_HOST, &glue->host_nb); if (ret) goto error_reset_assert; ret = phy_init(glue->phy); if (ret) - goto error_unregister_notifier; + goto error_reset_assert; musb->isr = sunxi_musb_interrupt; @@ -267,9 +267,6 @@ static int sunxi_musb_init(struct musb *musb) return 0; -error_unregister_notifier: - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, - &glue->host_nb); error_reset_assert: if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) reset_control_assert(glue->rst); @@ -293,9 +290,6 @@ static int sunxi_musb_exit(struct musb *musb) phy_exit(glue->phy); - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, - &glue->host_nb); - if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) reset_control_assert(glue->rst); -- 1.9.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2] usb: musb: sunxi: Uses the resource-managed extcon API when registering extcon notifier @ 2016-12-30 4:19 ` Chanwoo Choi 0 siblings, 0 replies; 6+ messages in thread From: Chanwoo Choi @ 2016-12-30 4:19 UTC (permalink / raw) To: b-liu, gregkh Cc: maxime.ripard, wens, linux-usb, linux-arm-kernel, linux-kernel, chanwoo, Chanwoo Choi This patch just uses the resource-managed extcon API when registering the extcon notifier. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Bin Liu <b-liu@ti.com> --- Changes from v1: - Rebase this patch based on v4.10-rc1. - Add acked-by tag from Maxime Ripard and Bin Lin. - Drop the phy/power-supply/chipidea patches. drivers/usb/musb/sunxi.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index d0be0eadd0d9..2332294dee0f 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -251,14 +251,14 @@ static int sunxi_musb_init(struct musb *musb) writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); /* Register notifier before calling phy_init() */ - ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, - &glue->host_nb); + ret = devm_extcon_register_notifier(glue->dev, glue->extcon, + EXTCON_USB_HOST, &glue->host_nb); if (ret) goto error_reset_assert; ret = phy_init(glue->phy); if (ret) - goto error_unregister_notifier; + goto error_reset_assert; musb->isr = sunxi_musb_interrupt; @@ -267,9 +267,6 @@ static int sunxi_musb_init(struct musb *musb) return 0; -error_unregister_notifier: - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, - &glue->host_nb); error_reset_assert: if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) reset_control_assert(glue->rst); @@ -293,9 +290,6 @@ static int sunxi_musb_exit(struct musb *musb) phy_exit(glue->phy); - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, - &glue->host_nb); - if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) reset_control_assert(glue->rst); -- 1.9.1 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2] usb: musb: sunxi: Uses the resource-managed extcon API when registering extcon notifier 2016-12-30 4:19 ` Chanwoo Choi @ 2017-01-10 8:20 ` Chanwoo Choi -1 siblings, 0 replies; 6+ messages in thread From: Chanwoo Choi @ 2017-01-10 8:20 UTC (permalink / raw) To: linux-arm-kernel Hi Felipe, This patch got the acked-by from Bin Liu and. Could you please apply this patch? On 2016? 12? 30? 13:19, Chanwoo Choi wrote: > This patch just uses the resource-managed extcon API when registering > the extcon notifier. > > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> > Acked-by: Bin Liu <b-liu@ti.com> > --- > Changes from v1: > - Rebase this patch based on v4.10-rc1. > - Add acked-by tag from Maxime Ripard and Bin Lin. > - Drop the phy/power-supply/chipidea patches. > > drivers/usb/musb/sunxi.c | 12 +++--------- > 1 file changed, 3 insertions(+), 9 deletions(-) > > diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c > index d0be0eadd0d9..2332294dee0f 100644 > --- a/drivers/usb/musb/sunxi.c > +++ b/drivers/usb/musb/sunxi.c > @@ -251,14 +251,14 @@ static int sunxi_musb_init(struct musb *musb) > writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); > > /* Register notifier before calling phy_init() */ > - ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, > - &glue->host_nb); > + ret = devm_extcon_register_notifier(glue->dev, glue->extcon, > + EXTCON_USB_HOST, &glue->host_nb); > if (ret) > goto error_reset_assert; > > ret = phy_init(glue->phy); > if (ret) > - goto error_unregister_notifier; > + goto error_reset_assert; > > musb->isr = sunxi_musb_interrupt; > > @@ -267,9 +267,6 @@ static int sunxi_musb_init(struct musb *musb) > > return 0; > > -error_unregister_notifier: > - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, > - &glue->host_nb); > error_reset_assert: > if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) > reset_control_assert(glue->rst); > @@ -293,9 +290,6 @@ static int sunxi_musb_exit(struct musb *musb) > > phy_exit(glue->phy); > > - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, > - &glue->host_nb); > - > if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) > reset_control_assert(glue->rst); > > -- Best Regards, Chanwoo Choi S/W Center, Samsung Electronics ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] usb: musb: sunxi: Uses the resource-managed extcon API when registering extcon notifier @ 2017-01-10 8:20 ` Chanwoo Choi 0 siblings, 0 replies; 6+ messages in thread From: Chanwoo Choi @ 2017-01-10 8:20 UTC (permalink / raw) To: b-liu, gregkh, Felipe Balbi Cc: maxime.ripard, wens, linux-usb, linux-arm-kernel, linux-kernel, chanwoo Hi Felipe, This patch got the acked-by from Bin Liu and. Could you please apply this patch? On 2016년 12월 30일 13:19, Chanwoo Choi wrote: > This patch just uses the resource-managed extcon API when registering > the extcon notifier. > > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> > Acked-by: Bin Liu <b-liu@ti.com> > --- > Changes from v1: > - Rebase this patch based on v4.10-rc1. > - Add acked-by tag from Maxime Ripard and Bin Lin. > - Drop the phy/power-supply/chipidea patches. > > drivers/usb/musb/sunxi.c | 12 +++--------- > 1 file changed, 3 insertions(+), 9 deletions(-) > > diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c > index d0be0eadd0d9..2332294dee0f 100644 > --- a/drivers/usb/musb/sunxi.c > +++ b/drivers/usb/musb/sunxi.c > @@ -251,14 +251,14 @@ static int sunxi_musb_init(struct musb *musb) > writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); > > /* Register notifier before calling phy_init() */ > - ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, > - &glue->host_nb); > + ret = devm_extcon_register_notifier(glue->dev, glue->extcon, > + EXTCON_USB_HOST, &glue->host_nb); > if (ret) > goto error_reset_assert; > > ret = phy_init(glue->phy); > if (ret) > - goto error_unregister_notifier; > + goto error_reset_assert; > > musb->isr = sunxi_musb_interrupt; > > @@ -267,9 +267,6 @@ static int sunxi_musb_init(struct musb *musb) > > return 0; > > -error_unregister_notifier: > - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, > - &glue->host_nb); > error_reset_assert: > if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) > reset_control_assert(glue->rst); > @@ -293,9 +290,6 @@ static int sunxi_musb_exit(struct musb *musb) > > phy_exit(glue->phy); > > - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, > - &glue->host_nb); > - > if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) > reset_control_assert(glue->rst); > > -- Best Regards, Chanwoo Choi S/W Center, Samsung Electronics ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2] usb: musb: sunxi: Uses the resource-managed extcon API when registering extcon notifier 2017-01-10 8:20 ` Chanwoo Choi @ 2017-01-10 20:47 ` Bin Liu -1 siblings, 0 replies; 6+ messages in thread From: Bin Liu @ 2017-01-10 20:47 UTC (permalink / raw) To: linux-arm-kernel On Tue, Jan 10, 2017 at 05:20:38PM +0900, Chanwoo Choi wrote: > Hi Felipe, > > This patch got the acked-by from Bin Liu and. > Could you please apply this patch? I have picked this one. Regards, -Bin. > > On 2016? 12? 30? 13:19, Chanwoo Choi wrote: > > This patch just uses the resource-managed extcon API when registering > > the extcon notifier. > > > > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> > > Acked-by: Bin Liu <b-liu@ti.com> > > --- > > Changes from v1: > > - Rebase this patch based on v4.10-rc1. > > - Add acked-by tag from Maxime Ripard and Bin Lin. > > - Drop the phy/power-supply/chipidea patches. > > > > drivers/usb/musb/sunxi.c | 12 +++--------- > > 1 file changed, 3 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c > > index d0be0eadd0d9..2332294dee0f 100644 > > --- a/drivers/usb/musb/sunxi.c > > +++ b/drivers/usb/musb/sunxi.c > > @@ -251,14 +251,14 @@ static int sunxi_musb_init(struct musb *musb) > > writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); > > > > /* Register notifier before calling phy_init() */ > > - ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, > > - &glue->host_nb); > > + ret = devm_extcon_register_notifier(glue->dev, glue->extcon, > > + EXTCON_USB_HOST, &glue->host_nb); > > if (ret) > > goto error_reset_assert; > > > > ret = phy_init(glue->phy); > > if (ret) > > - goto error_unregister_notifier; > > + goto error_reset_assert; > > > > musb->isr = sunxi_musb_interrupt; > > > > @@ -267,9 +267,6 @@ static int sunxi_musb_init(struct musb *musb) > > > > return 0; > > > > -error_unregister_notifier: > > - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, > > - &glue->host_nb); > > error_reset_assert: > > if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) > > reset_control_assert(glue->rst); > > @@ -293,9 +290,6 @@ static int sunxi_musb_exit(struct musb *musb) > > > > phy_exit(glue->phy); > > > > - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, > > - &glue->host_nb); > > - > > if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) > > reset_control_assert(glue->rst); > > > > > > > -- > Best Regards, > Chanwoo Choi > S/W Center, Samsung Electronics ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2] usb: musb: sunxi: Uses the resource-managed extcon API when registering extcon notifier @ 2017-01-10 20:47 ` Bin Liu 0 siblings, 0 replies; 6+ messages in thread From: Bin Liu @ 2017-01-10 20:47 UTC (permalink / raw) To: Chanwoo Choi Cc: gregkh, maxime.ripard, wens, linux-usb, linux-arm-kernel, linux-kernel, chanwoo On Tue, Jan 10, 2017 at 05:20:38PM +0900, Chanwoo Choi wrote: > Hi Felipe, > > This patch got the acked-by from Bin Liu and. > Could you please apply this patch? I have picked this one. Regards, -Bin. > > On 2016년 12월 30일 13:19, Chanwoo Choi wrote: > > This patch just uses the resource-managed extcon API when registering > > the extcon notifier. > > > > Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> > > Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> > > Acked-by: Bin Liu <b-liu@ti.com> > > --- > > Changes from v1: > > - Rebase this patch based on v4.10-rc1. > > - Add acked-by tag from Maxime Ripard and Bin Lin. > > - Drop the phy/power-supply/chipidea patches. > > > > drivers/usb/musb/sunxi.c | 12 +++--------- > > 1 file changed, 3 insertions(+), 9 deletions(-) > > > > diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c > > index d0be0eadd0d9..2332294dee0f 100644 > > --- a/drivers/usb/musb/sunxi.c > > +++ b/drivers/usb/musb/sunxi.c > > @@ -251,14 +251,14 @@ static int sunxi_musb_init(struct musb *musb) > > writeb(SUNXI_MUSB_VEND0_PIO_MODE, musb->mregs + SUNXI_MUSB_VEND0); > > > > /* Register notifier before calling phy_init() */ > > - ret = extcon_register_notifier(glue->extcon, EXTCON_USB_HOST, > > - &glue->host_nb); > > + ret = devm_extcon_register_notifier(glue->dev, glue->extcon, > > + EXTCON_USB_HOST, &glue->host_nb); > > if (ret) > > goto error_reset_assert; > > > > ret = phy_init(glue->phy); > > if (ret) > > - goto error_unregister_notifier; > > + goto error_reset_assert; > > > > musb->isr = sunxi_musb_interrupt; > > > > @@ -267,9 +267,6 @@ static int sunxi_musb_init(struct musb *musb) > > > > return 0; > > > > -error_unregister_notifier: > > - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, > > - &glue->host_nb); > > error_reset_assert: > > if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) > > reset_control_assert(glue->rst); > > @@ -293,9 +290,6 @@ static int sunxi_musb_exit(struct musb *musb) > > > > phy_exit(glue->phy); > > > > - extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, > > - &glue->host_nb); > > - > > if (test_bit(SUNXI_MUSB_FL_HAS_RESET, &glue->flags)) > > reset_control_assert(glue->rst); > > > > > > > -- > Best Regards, > Chanwoo Choi > S/W Center, Samsung Electronics ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-01-10 20:49 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20161230041914epcas5p24826e70fd5de710818687e55579757ba@epcas5p2.samsung.com>
2016-12-30 4:19 ` [PATCH v2] usb: musb: sunxi: Uses the resource-managed extcon API when registering extcon notifier Chanwoo Choi
2016-12-30 4:19 ` Chanwoo Choi
2017-01-10 8:20 ` Chanwoo Choi
2017-01-10 8:20 ` Chanwoo Choi
2017-01-10 20:47 ` Bin Liu
2017-01-10 20:47 ` Bin Liu
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.