From: Chanwoo Choi <cw00.choi@samsung.com>
To: Jaechul Lee <jcsing.lee@samsung.com>,
Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>, Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Javier Martinez Canillas <javier@osg.samsung.com>
Cc: Andi Shyti <andi.shyti@samsung.com>,
beomho.seo@samsung.com, galaxyra@gmail.com,
linux-arm-kernel@lists.infradead.org,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH v7 3/3] arm64: dts: exynos: Add tm2 touchkey node
Date: Tue, 17 Jan 2017 15:12:28 +0900 [thread overview]
Message-ID: <587DB5CC.4090909@samsung.com> (raw)
In-Reply-To: <1484632479-3111-4-git-send-email-jcsing.lee@samsung.com>
Hi,
I tested this patch on v6[1] and replied it.
But, this version is missing the my tested-by and reviewed-by tag.
[1] https://patchwork.kernel.org/patch/9504139/
So, I add my reviewed-by and tested-by tag again.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
On 2017년 01월 17일 14:54, Jaechul Lee wrote:
> Add DT node support for TM2 touchkey device.
>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> index 2449266..ddba2f8 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -18,6 +18,19 @@
> compatible = "samsung,tm2", "samsung,exynos5433";
> };
>
> +&hsi2c_9 {
> + status = "okay";
> +
> + touchkey@20 {
> + compatible = "cypress,tm2-touchkey";
> + reg = <0x20>;
> + interrupt-parent = <&gpa3>;
> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> + vcc-supply = <&ldo32_reg>;
> + vdd-supply = <&ldo33_reg>;
> + };
> +};
> +
> &ldo31_reg {
> regulator-name = "TSP_VDD_1.85V_AP";
> regulator-min-microvolt = <1850000>;
>
--
Best Regards,
Chanwoo Choi
S/W Center, Samsung Electronics
WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 3/3] arm64: dts: exynos: Add tm2 touchkey node
Date: Tue, 17 Jan 2017 15:12:28 +0900 [thread overview]
Message-ID: <587DB5CC.4090909@samsung.com> (raw)
In-Reply-To: <1484632479-3111-4-git-send-email-jcsing.lee@samsung.com>
Hi,
I tested this patch on v6[1] and replied it.
But, this version is missing the my tested-by and reviewed-by tag.
[1] https://patchwork.kernel.org/patch/9504139/
So, I add my reviewed-by and tested-by tag again.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
On 2017? 01? 17? 14:54, Jaechul Lee wrote:
> Add DT node support for TM2 touchkey device.
>
> Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
> Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
> ---
> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> index 2449266..ddba2f8 100644
> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
> @@ -18,6 +18,19 @@
> compatible = "samsung,tm2", "samsung,exynos5433";
> };
>
> +&hsi2c_9 {
> + status = "okay";
> +
> + touchkey at 20 {
> + compatible = "cypress,tm2-touchkey";
> + reg = <0x20>;
> + interrupt-parent = <&gpa3>;
> + interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> + vcc-supply = <&ldo32_reg>;
> + vdd-supply = <&ldo33_reg>;
> + };
> +};
> +
> &ldo31_reg {
> regulator-name = "TSP_VDD_1.85V_AP";
> regulator-min-microvolt = <1850000>;
>
--
Best Regards,
Chanwoo Choi
S/W Center, Samsung Electronics
next prev parent reply other threads:[~2017-01-17 6:12 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20170117055443epcas1p40b08d361f8f95090ad7b4d855a5bfad4@epcas1p4.samsung.com>
2017-01-17 5:54 ` [PATCH v7 0/3] Add touch key driver support for TM2 Jaechul Lee
2017-01-17 5:54 ` Jaechul Lee
2017-01-17 5:54 ` Jaechul Lee
[not found] ` <CGME20170117055444epcas1p4942aeca8896c9b81512d383cbbca4dbf@epcas1p4.samsung.com>
[not found] ` <1484632479-3111-1-git-send-email-jcsing.lee-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-01-17 5:54 ` [PATCH v7 1/3] input: Add support for the tm2 touchkey device driver Jaechul Lee
2017-01-17 5:54 ` Jaechul Lee
2017-01-17 5:54 ` Jaechul Lee
2017-01-17 5:54 ` [PATCH v7 2/3] input: tm2-touchkey: Add touchkey driver support for TM2 Jaechul Lee
2017-01-17 5:54 ` Jaechul Lee
2017-01-17 17:20 ` Krzysztof Kozlowski
2017-01-17 17:20 ` Krzysztof Kozlowski
2017-01-17 17:20 ` Krzysztof Kozlowski
2017-01-17 18:06 ` Dmitry Torokhov
2017-01-17 18:06 ` Dmitry Torokhov
2017-01-17 18:06 ` Dmitry Torokhov
2017-01-17 18:10 ` Krzysztof Kozlowski
2017-01-17 18:10 ` Krzysztof Kozlowski
2017-01-17 18:10 ` Krzysztof Kozlowski
2017-01-18 22:47 ` Dmitry Torokhov
2017-01-18 22:47 ` Dmitry Torokhov
2017-01-18 22:47 ` Dmitry Torokhov
2017-01-19 7:17 ` Krzysztof Kozlowski
2017-01-19 7:17 ` Krzysztof Kozlowski
2017-01-17 5:54 ` [PATCH v7 3/3] arm64: dts: exynos: Add tm2 touchkey node Jaechul Lee
2017-01-17 5:54 ` Jaechul Lee
2017-01-17 6:12 ` Chanwoo Choi [this message]
2017-01-17 6:12 ` Chanwoo Choi
[not found] ` <1484632479-3111-4-git-send-email-jcsing.lee-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2017-01-19 20:10 ` Krzysztof Kozlowski
2017-01-19 20:10 ` Krzysztof Kozlowski
2017-01-19 20:10 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=587DB5CC.4090909@samsung.com \
--to=cw00.choi@samsung.com \
--cc=andi.shyti@samsung.com \
--cc=beomho.seo@samsung.com \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=galaxyra@gmail.com \
--cc=javier@osg.samsung.com \
--cc=jcsing.lee@samsung.com \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.