From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL 8/8] ARM: SoC: late DT updates for v4.9
Date: Sat, 08 Oct 2016 02:39:51 +0200 [thread overview]
Message-ID: <5946904.G3JhgjvTMc@wuerfel> (raw)
In-Reply-To: <3637015.LRn5VyhPVM@wuerfel>
The following changes since commit d63a5e7c713a68bd368016f2022326a1a91310d8:
clk: sunxi-ng: Add hardware dependency (2016-09-10 11:41:21 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/armsoc-late
for you to fetch changes up to 8185041f5fa6f02acf75229a590e16aac028fc5e:
ARM: dts: lpc32xx: add device node for IRAM on-chip memory (2016-10-02 22:08:11 -0700)
----------------------------------------------------------------
ARM: SoC: late DT updates for v4.9
These updates have been kept in a separate branch mostly because
they rely on updates to the respective clk drivers to keep the
shared header files in sync.
- The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
automotive SoC similar to the ?8a7795 chip we already support, but
the dts changes rely on a clock driver change that has been
merged for v4.9 through the clk tree.
- The Amlogic meson-gxbb (S905) platform gains support for a few
drivers merged through our tree, in particular the network and
usb driver changes are required and included here, and also
the clk tree changes.
- The Allwinner platforms have seen a large-scale change to their
clk drivers and the dts file updates must come after that.
This includes the newly added Nextthing GR8 platform, which is
derived from sun5i/A13.
- Some integrator (arm32) changes rely on clk driver changes.
- A single patch for lpc32xx has no such dependency but wasn't
added until just before the merge window
----------------------------------------------------------------
Arnd Bergmann (8):
Merge tag 'sunxi-dt-for-4.9-2' of https://git.kernel.org/.../mripard/linux into next/late
Merge tag 'amlogic-dt64' of git://git.kernel.org/.../khilman/linux-amlogic into next/late
Merge tag 'renesas-arm64-dt-for-v4.9' of git://git.kernel.org/.../horms/renesas into next/late
Merge tag 'integrator-armsoc-1' of git://git.kernel.org/.../linusw/linux-integrator into next/late
Merge tag 'amlogic-drivers-2' of git://git.kernel.org/.../khilman/linux-amlogic into next/late
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/.../khilman/linux-amlogic into next/late
Merge tag 'sunxi-dt-for-4.9-3' of https://git.kernel.org/.../mripard/linux into next/late
Merge branch 'next/late' into HEAD
Carlo Caione (4):
documentation: Add secure monitor bindings documentation
ARM64: dts: amlogic: gxbb: Enable secure monitor
documentation: Add nvmem bindings documentation
ARM64: dts: amlogic: gxbb: Enable NVMEM
Chen-Yu Tsai (7):
ARM: dts: sun6i: switch A31/A31s to new CCU clock bindings
ARM: dts: sun8i: Move A23/A33 usbphy and usb_otg nodes to common dtsi
ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
ARM: dts: sun9i: a80-optimus: Disable EHCI1
Geert Uytterhoeven (1):
arm64: dts: r8a7795: Add SoC-specific compatible property to audio-dmac nodes
Hans de Goede (6):
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
Icenowy Zheng (2):
ARM: dts: sun8i: add pinmux for UART1 at PG
ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
Jerome Brunet (7):
ARM64: dts: amlogic: add spi nor pins
ARM64: dts: meson-gxbb: add pins for I2C
ARM64: dts: gxbb: add i2c bus
usb: dwc2: add support for Meson8b and GXBB SoCs
clk: gxbb: expose spifc clock
clk: gxbb: expose i2c clocks
ARM64: dts: meson-gxbb-p20x: Enable USB Nodes
Joachim Eastwood (1):
stmmac: introduce get_stmmac_bsp_priv() helper
Jorik Jonker (5):
dts: sun8i-h3: add pinmux definitions for UART2-3
dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
dts: sun8i-h3: add pinmux definitions for I2C0-2
dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
Kevin Hilman (7):
ARM64: DTS: meson-gxbb: switch ethernet to real clock
Merge branch 'clk-meson-gxbb-ao' of git://git.kernel.org/.../clk/linux into v4.8/dt64
ARM64: dts: amlogic: add the input pin for the IR remote
ARM64: dts: meson-gxbb: Add PWM pinctrl nodes
Merge branch 'clk-meson-gxbb' of git://git.kernel.org/.../clk/linux into v4.8/drivers
Merge tag 'amlogic-drivers-2' into v4.8/dt64-2
Merge branch 'v4.8/dt64' into v4.8/dt64-2
Kieran Bingham (2):
arm64: dts: r8a7795: add FCPF device nodes
arm64: dts: r8a7795: add FDP1 device nodes
Laurent Pinchart (5):
arm64: dts: renesas: r8a7795: Add FCPV nodes
arm64: dts: renesas: r8a7795: Add VSP instances
arm64: dts: renesas: r8a7795: Add DU device to DT
arm64: dts: r8a7795: renesas: salvator-x: Enable DU
arm64: dts: r8a7795: salvator-x: Configure pins for the DU RGB output
Linus Walleij (8):
ARM: dts: set the 24MHz xtal as parent of the UART clock
ARM: dts: add the Integrator/AP baseboard clocks
ARM: dts: Add the core module clocks to Integrator/AP
ARM: dts: add the core module clocks to Integrator/CP
ARM: integrator: move CP CLCD display to DTS
ARM: integrator: delete some auxdata
ARM: integrator: cut down on static maps
ARM: integrator: read counter using syscon/regmap
Martin Blumenstingl (11):
ARM64: dts: meson-gxbb: Enable the the IR decoder on supported boards
net: dt-bindings: Document the new Meson8b and GXBB DWMAC bindings
net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC
net: stmmac: update the module description of the dwmac-meson driver
ARM64: dts: amlogic: enable ethernet on all Tronsmart Vega S95 devices
ARM64: dts: meson-gxbb: use the new GXBB DWMAC glue driver
ARM64: dts: meson-gxbb: add USB Nodes
Documentation: dt-bindings: Add documentation for the Meson USB2 PHYs
clk: gxbb: expose MPLL2 clock for use by DT
clk: gxbb: expose USB clocks
ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
Maxime Ripard (4):
Merge branch 'sunxi/clk-for-4.9' into sunxi/dt-for-4.9
ARM: sun8i: Convert the A23 and A33 to the CCU
ARM: sun8i: a33: Add display pipeline
ARM: sun8i: a23/a33: Add RGB666 pins
Myl?ne Josserand (2):
ARM: dts: Add NextThing GR8 dtsi
ARM: dts: gr8: Add support for the GR8 evaluation board
Neil Armstrong (9):
ARM64: dts: amlogic: meson-gxbb: Add watchdog node
ARM64: dts: meson-gxbb: Add GXBB AO Clock and Reset node
dt-bindings: media: meson-ir: Add Meson8b and GXBB compatible strings
ARM64: dts: meson-gxbb: Add Infrared Remote Controller decoder
ARM64: dts: meson-gxbb: Add Meson MHU Node
ARM64: dts: meson-gxbb: Add Meson GXBB PWM Controller nodes
ARM64: dts: meson-gxbb: add the SDIO pins
ARM64: dts: meson-gxbb: Add SPIFC node
ARM64: dts: meson-gxbb: add I2C nodes
Simon Horman (1):
arm64: dts: r8a7795: remove unnecessary cap-mmc-highspeed property
Takeshi Kihara (2):
arm64: dts: r8a7796: Add pinctrl device node
arm64: dts: r8a7796: Add GPIO device nodes
Ulrich Hecht (1):
arm64: dts: r8a7796: salvator-x: add serial console pins
Vladimir Barinov (13):
arm64: dts: h3ulcb: add H3ULCB board DT bindings
arm64: dts: h3ulcb: initial device tree
arm64: dts: h3ulcb: enable SCIF clk and pins
arm64: dts: h3ulcb: enable EthernetAVB
arm64: dts: h3ulcb: enable I2C2
arm64: dts: h3ulcb: enable EXTALR clk
arm64: dts: h3ulcb: enable WDT
arm64: dts: h3ulcb: enable USB2 PHY of channel 1
arm64: dts: h3ulcb: enable USB2.0 Host channel 1
arm64: dts: h3ulcb: enable GPIO keys
arm64: dts: h3ulcb: enable SDHI0
arm64: dts: h3ulcb: Sound SSI support
arm64: dts: h3ulcb: enable GPIO leds
Vladimir Zapolskiy (1):
ARM: dts: lpc32xx: add device node for IRAM on-chip memory
Wolfram Sang (1):
arm64: dts: r8a7795: set maximum frequency for SDHI clocks
Yoshihiro Shimoda (4):
arm64: dts: r8a7795: Add HSUSB device node
arm64: dts: r8a7795: salvator-x: enable usb2_phy of channel 0
arm64: dts: r8a7795: salvator-x: enable USB 2.0 Host channel 0
arm64: dts: r8a7795: salvator-x: enable HSUSB
Documentation/devicetree/bindings/arm/shmobile.txt | 2 +
.../bindings/firmware/meson/meson_sm.txt | 15 +
.../devicetree/bindings/media/meson-ir.txt | 5 +-
.../devicetree/bindings/net/meson-dwmac.txt | 45 +-
.../devicetree/bindings/nvmem/amlogic-efuse.txt | 39 +
.../devicetree/bindings/phy/meson-usb2-phy.txt | 27 +
Documentation/devicetree/bindings/usb/dwc2.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/integratorap.dts | 51 +-
arch/arm/boot/dts/integratorcp.dts | 74 +-
arch/arm/boot/dts/lpc32xx.dtsi | 12 +-
arch/arm/boot/dts/ntc-gr8-evb.dts | 342 ++++++
arch/arm/boot/dts/ntc-gr8.dtsi | 1087 ++++++++++++++++++++
arch/arm/boot/dts/sun6i-a31.dtsi | 424 ++------
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 305 ++----
arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts | 9 +
arch/arm/boot/dts/sun8i-a23-inet86dz.dts | 9 +
.../boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts | 26 +
.../boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts | 9 +
arch/arm/boot/dts/sun8i-a23.dtsi | 80 +-
arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts | 10 +
arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts | 20 +
arch/arm/boot/dts/sun8i-a33.dtsi | 236 +++--
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 2 +-
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 18 +
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 18 +
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 18 +
arch/arm/boot/dts/sun8i-h3.dtsi | 85 +-
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 116 +++
arch/arm/boot/dts/sun9i-a80-optimus.dts | 123 ++-
arch/arm/mach-integrator/integrator_ap.c | 36 -
arch/arm/mach-integrator/integrator_cp.c | 123 +--
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 11 +
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 6 +
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 35 +
.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 42 +
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 329 +++++-
arch/arm64/boot/dts/renesas/Makefile | 2 +-
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 328 ++++++
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 87 ++
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 276 ++++-
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 16 +
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 117 +++
drivers/clk/meson/gxbb.h | 18 +-
drivers/net/ethernet/stmicro/stmmac/Kconfig | 6 +-
drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c | 4 +-
.../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 324 ++++++
.../net/ethernet/stmicro/stmmac/stmmac_platform.h | 8 +
drivers/usb/dwc2/platform.c | 34 +
include/dt-bindings/clock/gxbb-clkc.h | 9 +
51 files changed, 4153 insertions(+), 870 deletions(-)
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, arm@kernel.org
Subject: [GIT PULL 8/8] ARM: SoC: late DT updates for v4.9
Date: Sat, 08 Oct 2016 02:39:51 +0200 [thread overview]
Message-ID: <5946904.G3JhgjvTMc@wuerfel> (raw)
In-Reply-To: <3637015.LRn5VyhPVM@wuerfel>
The following changes since commit d63a5e7c713a68bd368016f2022326a1a91310d8:
clk: sunxi-ng: Add hardware dependency (2016-09-10 11:41:21 +0200)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git tags/armsoc-late
for you to fetch changes up to 8185041f5fa6f02acf75229a590e16aac028fc5e:
ARM: dts: lpc32xx: add device node for IRAM on-chip memory (2016-10-02 22:08:11 -0700)
----------------------------------------------------------------
ARM: SoC: late DT updates for v4.9
These updates have been kept in a separate branch mostly because
they rely on updates to the respective clk drivers to keep the
shared header files in sync.
- The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an
automotive SoC similar to the ⅹ8a7795 chip we already support, but
the dts changes rely on a clock driver change that has been
merged for v4.9 through the clk tree.
- The Amlogic meson-gxbb (S905) platform gains support for a few
drivers merged through our tree, in particular the network and
usb driver changes are required and included here, and also
the clk tree changes.
- The Allwinner platforms have seen a large-scale change to their
clk drivers and the dts file updates must come after that.
This includes the newly added Nextthing GR8 platform, which is
derived from sun5i/A13.
- Some integrator (arm32) changes rely on clk driver changes.
- A single patch for lpc32xx has no such dependency but wasn't
added until just before the merge window
----------------------------------------------------------------
Arnd Bergmann (8):
Merge tag 'sunxi-dt-for-4.9-2' of https://git.kernel.org/.../mripard/linux into next/late
Merge tag 'amlogic-dt64' of git://git.kernel.org/.../khilman/linux-amlogic into next/late
Merge tag 'renesas-arm64-dt-for-v4.9' of git://git.kernel.org/.../horms/renesas into next/late
Merge tag 'integrator-armsoc-1' of git://git.kernel.org/.../linusw/linux-integrator into next/late
Merge tag 'amlogic-drivers-2' of git://git.kernel.org/.../khilman/linux-amlogic into next/late
Merge tag 'amlogic-dt64-2' of git://git.kernel.org/.../khilman/linux-amlogic into next/late
Merge tag 'sunxi-dt-for-4.9-3' of https://git.kernel.org/.../mripard/linux into next/late
Merge branch 'next/late' into HEAD
Carlo Caione (4):
documentation: Add secure monitor bindings documentation
ARM64: dts: amlogic: gxbb: Enable secure monitor
documentation: Add nvmem bindings documentation
ARM64: dts: amlogic: gxbb: Enable NVMEM
Chen-Yu Tsai (7):
ARM: dts: sun6i: switch A31/A31s to new CCU clock bindings
ARM: dts: sun8i: Move A23/A33 usbphy and usb_otg nodes to common dtsi
ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators
ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators
ARM: dts: sun9i: a80-optimus: Disable EHCI1
Geert Uytterhoeven (1):
arm64: dts: r8a7795: Add SoC-specific compatible property to audio-dmac nodes
Hans de Goede (6):
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03
ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04
ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h
ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03
Icenowy Zheng (2):
ARM: dts: sun8i: add pinmux for UART1 at PG
ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board
Jerome Brunet (7):
ARM64: dts: amlogic: add spi nor pins
ARM64: dts: meson-gxbb: add pins for I2C
ARM64: dts: gxbb: add i2c bus
usb: dwc2: add support for Meson8b and GXBB SoCs
clk: gxbb: expose spifc clock
clk: gxbb: expose i2c clocks
ARM64: dts: meson-gxbb-p20x: Enable USB Nodes
Joachim Eastwood (1):
stmmac: introduce get_stmmac_bsp_priv() helper
Jorik Jonker (5):
dts: sun8i-h3: add pinmux definitions for UART2-3
dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux
dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards
dts: sun8i-h3: add pinmux definitions for I2C0-2
dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC
Kevin Hilman (7):
ARM64: DTS: meson-gxbb: switch ethernet to real clock
Merge branch 'clk-meson-gxbb-ao' of git://git.kernel.org/.../clk/linux into v4.8/dt64
ARM64: dts: amlogic: add the input pin for the IR remote
ARM64: dts: meson-gxbb: Add PWM pinctrl nodes
Merge branch 'clk-meson-gxbb' of git://git.kernel.org/.../clk/linux into v4.8/drivers
Merge tag 'amlogic-drivers-2' into v4.8/dt64-2
Merge branch 'v4.8/dt64' into v4.8/dt64-2
Kieran Bingham (2):
arm64: dts: r8a7795: add FCPF device nodes
arm64: dts: r8a7795: add FDP1 device nodes
Laurent Pinchart (5):
arm64: dts: renesas: r8a7795: Add FCPV nodes
arm64: dts: renesas: r8a7795: Add VSP instances
arm64: dts: renesas: r8a7795: Add DU device to DT
arm64: dts: r8a7795: renesas: salvator-x: Enable DU
arm64: dts: r8a7795: salvator-x: Configure pins for the DU RGB output
Linus Walleij (8):
ARM: dts: set the 24MHz xtal as parent of the UART clock
ARM: dts: add the Integrator/AP baseboard clocks
ARM: dts: Add the core module clocks to Integrator/AP
ARM: dts: add the core module clocks to Integrator/CP
ARM: integrator: move CP CLCD display to DTS
ARM: integrator: delete some auxdata
ARM: integrator: cut down on static maps
ARM: integrator: read counter using syscon/regmap
Martin Blumenstingl (11):
ARM64: dts: meson-gxbb: Enable the the IR decoder on supported boards
net: dt-bindings: Document the new Meson8b and GXBB DWMAC bindings
net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC
net: stmmac: update the module description of the dwmac-meson driver
ARM64: dts: amlogic: enable ethernet on all Tronsmart Vega S95 devices
ARM64: dts: meson-gxbb: use the new GXBB DWMAC glue driver
ARM64: dts: meson-gxbb: add USB Nodes
Documentation: dt-bindings: Add documentation for the Meson USB2 PHYs
clk: gxbb: expose MPLL2 clock for use by DT
clk: gxbb: expose USB clocks
ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes
Maxime Ripard (4):
Merge branch 'sunxi/clk-for-4.9' into sunxi/dt-for-4.9
ARM: sun8i: Convert the A23 and A33 to the CCU
ARM: sun8i: a33: Add display pipeline
ARM: sun8i: a23/a33: Add RGB666 pins
Mylène Josserand (2):
ARM: dts: Add NextThing GR8 dtsi
ARM: dts: gr8: Add support for the GR8 evaluation board
Neil Armstrong (9):
ARM64: dts: amlogic: meson-gxbb: Add watchdog node
ARM64: dts: meson-gxbb: Add GXBB AO Clock and Reset node
dt-bindings: media: meson-ir: Add Meson8b and GXBB compatible strings
ARM64: dts: meson-gxbb: Add Infrared Remote Controller decoder
ARM64: dts: meson-gxbb: Add Meson MHU Node
ARM64: dts: meson-gxbb: Add Meson GXBB PWM Controller nodes
ARM64: dts: meson-gxbb: add the SDIO pins
ARM64: dts: meson-gxbb: Add SPIFC node
ARM64: dts: meson-gxbb: add I2C nodes
Simon Horman (1):
arm64: dts: r8a7795: remove unnecessary cap-mmc-highspeed property
Takeshi Kihara (2):
arm64: dts: r8a7796: Add pinctrl device node
arm64: dts: r8a7796: Add GPIO device nodes
Ulrich Hecht (1):
arm64: dts: r8a7796: salvator-x: add serial console pins
Vladimir Barinov (13):
arm64: dts: h3ulcb: add H3ULCB board DT bindings
arm64: dts: h3ulcb: initial device tree
arm64: dts: h3ulcb: enable SCIF clk and pins
arm64: dts: h3ulcb: enable EthernetAVB
arm64: dts: h3ulcb: enable I2C2
arm64: dts: h3ulcb: enable EXTALR clk
arm64: dts: h3ulcb: enable WDT
arm64: dts: h3ulcb: enable USB2 PHY of channel 1
arm64: dts: h3ulcb: enable USB2.0 Host channel 1
arm64: dts: h3ulcb: enable GPIO keys
arm64: dts: h3ulcb: enable SDHI0
arm64: dts: h3ulcb: Sound SSI support
arm64: dts: h3ulcb: enable GPIO leds
Vladimir Zapolskiy (1):
ARM: dts: lpc32xx: add device node for IRAM on-chip memory
Wolfram Sang (1):
arm64: dts: r8a7795: set maximum frequency for SDHI clocks
Yoshihiro Shimoda (4):
arm64: dts: r8a7795: Add HSUSB device node
arm64: dts: r8a7795: salvator-x: enable usb2_phy of channel 0
arm64: dts: r8a7795: salvator-x: enable USB 2.0 Host channel 0
arm64: dts: r8a7795: salvator-x: enable HSUSB
Documentation/devicetree/bindings/arm/shmobile.txt | 2 +
.../bindings/firmware/meson/meson_sm.txt | 15 +
.../devicetree/bindings/media/meson-ir.txt | 5 +-
.../devicetree/bindings/net/meson-dwmac.txt | 45 +-
.../devicetree/bindings/nvmem/amlogic-efuse.txt | 39 +
.../devicetree/bindings/phy/meson-usb2-phy.txt | 27 +
Documentation/devicetree/bindings/usb/dwc2.txt | 2 +
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/integratorap.dts | 51 +-
arch/arm/boot/dts/integratorcp.dts | 74 +-
arch/arm/boot/dts/lpc32xx.dtsi | 12 +-
arch/arm/boot/dts/ntc-gr8-evb.dts | 342 ++++++
arch/arm/boot/dts/ntc-gr8.dtsi | 1087 ++++++++++++++++++++
arch/arm/boot/dts/sun6i-a31.dtsi | 424 ++------
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 305 ++----
arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts | 9 +
arch/arm/boot/dts/sun8i-a23-inet86dz.dts | 9 +
.../boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts | 26 +
.../boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts | 9 +
arch/arm/boot/dts/sun8i-a23.dtsi | 80 +-
arch/arm/boot/dts/sun8i-a33-ga10h-v1.1.dts | 10 +
arch/arm/boot/dts/sun8i-a33-inet-d978-rev2.dts | 20 +
arch/arm/boot/dts/sun8i-a33.dtsi | 236 +++--
arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts | 2 +-
arch/arm/boot/dts/sun8i-h3-orangepi-2.dts | 18 +
arch/arm/boot/dts/sun8i-h3-orangepi-one.dts | 18 +
arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts | 18 +
arch/arm/boot/dts/sun8i-h3.dtsi | 85 +-
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 116 +++
arch/arm/boot/dts/sun9i-a80-optimus.dts | 123 ++-
arch/arm/mach-integrator/integrator_ap.c | 36 -
arch/arm/mach-integrator/integrator_cp.c | 123 +--
.../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 11 +
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 6 +
arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 35 +
.../boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 42 +
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 329 +++++-
arch/arm64/boot/dts/renesas/Makefile | 2 +-
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 328 ++++++
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 87 ++
arch/arm64/boot/dts/renesas/r8a7795.dtsi | 276 ++++-
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts | 16 +
arch/arm64/boot/dts/renesas/r8a7796.dtsi | 117 +++
drivers/clk/meson/gxbb.h | 18 +-
drivers/net/ethernet/stmicro/stmmac/Kconfig | 6 +-
drivers/net/ethernet/stmicro/stmmac/Makefile | 2 +-
drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c | 4 +-
.../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 324 ++++++
.../net/ethernet/stmicro/stmmac/stmmac_platform.h | 8 +
drivers/usb/dwc2/platform.c | 34 +
include/dt-bindings/clock/gxbb-clkc.h | 9 +
51 files changed, 4153 insertions(+), 870 deletions(-)
next prev parent reply other threads:[~2016-10-08 0:39 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-08 0:28 [GIT PULL 0/8] ARM: SoC changes for v4.9 Arnd Bergmann
2016-10-08 0:28 ` Arnd Bergmann
2016-10-08 0:29 ` [GIT PULL 1/8] ARM: SoC cleanups " Arnd Bergmann
2016-10-08 0:29 ` Arnd Bergmann
2016-10-08 0:30 ` [GIT PULL 2/8] ARM: SoC platform updates " Arnd Bergmann
2016-10-08 0:30 ` Arnd Bergmann
2016-10-08 0:31 ` [GIT PULL 3/8] ARM: SoC defconfig changes " Arnd Bergmann
2016-10-08 0:31 ` Arnd Bergmann
2016-10-08 0:31 ` [GIT PULL 4/8] ARM: SoC 64-bit " Arnd Bergmann
2016-10-08 0:31 ` Arnd Bergmann
2016-10-08 0:32 ` [GIT PULL 5/8] ARM: SoC driver updates " Arnd Bergmann
2016-10-08 0:32 ` Arnd Bergmann
2016-10-08 0:33 ` [GIT PULL 6/8] ARM: DT " Arnd Bergmann
2016-10-08 0:33 ` Arnd Bergmann
2016-10-08 0:37 ` [GIT PULL 7/8] ARM: 64-bit DT updates for v4.8 Arnd Bergmann
2016-10-08 0:37 ` Arnd Bergmann
2016-10-08 0:39 ` Arnd Bergmann [this message]
2016-10-08 0:39 ` [GIT PULL 8/8] ARM: SoC: late DT updates for v4.9 Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5946904.G3JhgjvTMc@wuerfel \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.