[PATCH 1/2] Documentation: dt: extcon: add optional debounce-timeout-ms attribute

[PATCH 1/2] Documentation: dt: extcon: add optional debounce-timeout-ms attribute

[Raveendra Padasalagi]

Add documentation on optional dt attribute "debounce-timeout-ms"
in extcon node to capture user specified timeout value for id
and vbus gpio detection.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com>
---
 Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
index dfc14f7..6df6d69 100644
--- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
+++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
@@ -10,6 +10,10 @@ Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
 - id-gpio: gpio for USB ID pin. See gpio binding.
 - vbus-gpio: gpio for USB VBUS pin.
 
+Optional properties:
+- debounce-timeout-ms: debounce timeout value for id and vbus gpio in
+  milliseconds.
+
 Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
 	extcon_usb1 {
 		compatible = "linux,extcon-usb-gpio";
-- 
1.9.1

[PATCH 2/2] extcon: add optional debounce-timeout-ms attribute

[Raveendra Padasalagi]

Add changes to capture optional dt attribute "debounce-timeout-ms"
provided in extcon node and used the same value if provided otherwise
default value of 20ms is used for id and vbus gpios debounce time.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com>
---
 drivers/extcon/extcon-usb-gpio.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
index 9c925b0..090f65f 100644
--- a/drivers/extcon/extcon-usb-gpio.c
+++ b/drivers/extcon/extcon-usb-gpio.c
@@ -41,6 +41,7 @@ struct usb_extcon_info {
 
 	unsigned long debounce_jiffies;
 	struct delayed_work wq_detcable;
+	unsigned int gpio_debounce_timeout_ms;
 };
 
 static const unsigned int usb_extcon_cable[] = {
@@ -133,6 +134,11 @@ static int usb_extcon_probe(struct platform_device *pdev)
 	if (IS_ERR(info->vbus_gpiod))
 		return PTR_ERR(info->vbus_gpiod);
 
+	ret = of_property_read_u32(np, "debounce-timeout-ms",
+			     &info->gpio_debounce_timeout_ms);
+	if (ret)
+		info->gpio_debounce_timeout_ms = USB_GPIO_DEBOUNCE_MS;
+
 	info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
 	if (IS_ERR(info->edev)) {
 		dev_err(dev, "failed to allocate extcon device\n");
@@ -147,13 +153,14 @@ static int usb_extcon_probe(struct platform_device *pdev)
 
 	if (info->id_gpiod)
 		ret = gpiod_set_debounce(info->id_gpiod,
-					 USB_GPIO_DEBOUNCE_MS * 1000);
+					 info->gpio_debounce_timeout_ms * 1000);
 	if (!ret && info->vbus_gpiod)
 		ret = gpiod_set_debounce(info->vbus_gpiod,
-					 USB_GPIO_DEBOUNCE_MS * 1000);
+					 info->gpio_debounce_timeout_ms * 1000);
 
 	if (ret < 0)
-		info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEBOUNCE_MS);
+		info->debounce_jiffies = msecs_to_jiffies(
+						info->gpio_debounce_timeout_ms);
 
 	INIT_DELAYED_WORK(&info->wq_detcable, usb_extcon_detect_cable);
 
-- 
1.9.1

Re: [PATCH 2/2] extcon: add optional debounce-timeout-ms attribute

[Chanwoo Choi]

Hi,

On 2017년 10월 16일 16:34, Raveendra Padasalagi wrote:
> Add changes to capture optional dt attribute "debounce-timeout-ms"
> provided in extcon node and used the same value if provided otherwise
> default value of 20ms is used for id and vbus gpios debounce time.
> 
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Srinath Mannam <srinath.mannam-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> ---
>  drivers/extcon/extcon-usb-gpio.c | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
> index 9c925b0..090f65f 100644
> --- a/drivers/extcon/extcon-usb-gpio.c
> +++ b/drivers/extcon/extcon-usb-gpio.c
> @@ -41,6 +41,7 @@ struct usb_extcon_info {
>  
>  	unsigned long debounce_jiffies;
>  	struct delayed_work wq_detcable;
> +	unsigned int gpio_debounce_timeout_ms;

You better to use the "debounce_usecs" name
because the unit of debounce time is usec.

>  };
>  
>  static const unsigned int usb_extcon_cable[] = {
> @@ -133,6 +134,11 @@ static int usb_extcon_probe(struct platform_device *pdev)
>  	if (IS_ERR(info->vbus_gpiod))
>  		return PTR_ERR(info->vbus_gpiod);
>  
> +	ret = of_property_read_u32(np, "debounce-timeout-ms",
> +			     &info->gpio_debounce_timeout_ms);

I prefer to use the 'input-debounce' property name
Because the pinctrl-bindings.txt[1] gives the guide
for the generic name of debounce.
[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- "debounce-timeout-ms" -> "input-debounce"

> +	if (ret)
> +		info->gpio_debounce_timeout_ms = USB_GPIO_DEBOUNCE_MS;
> +
>  	info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
>  	if (IS_ERR(info->edev)) {
>  		dev_err(dev, "failed to allocate extcon device\n");
> @@ -147,13 +153,14 @@ static int usb_extcon_probe(struct platform_device *pdev)
>  
>  	if (info->id_gpiod)
>  		ret = gpiod_set_debounce(info->id_gpiod,
> -					 USB_GPIO_DEBOUNCE_MS * 1000);
> +					 info->gpio_debounce_timeout_ms * 1000);
>  	if (!ret && info->vbus_gpiod)
>  		ret = gpiod_set_debounce(info->vbus_gpiod,
> -					 USB_GPIO_DEBOUNCE_MS * 1000);
> +					 info->gpio_debounce_timeout_ms * 1000);
>  
>  	if (ret < 0)
> -		info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEBOUNCE_MS);
> +		info->debounce_jiffies = msecs_to_jiffies(
> +						info->gpio_debounce_timeout_ms);
>  
>  	INIT_DELAYED_WORK(&info->wq_detcable, usb_extcon_detect_cable);
>  
> 

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/2] extcon: add optional debounce-timeout-ms attribute

[Chanwoo Choi]

Hi,

On 2017년 10월 16일 16:34, Raveendra Padasalagi wrote:
> Add changes to capture optional dt attribute "debounce-timeout-ms"
> provided in extcon node and used the same value if provided otherwise
> default value of 20ms is used for id and vbus gpios debounce time.
> 
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com>
> ---
>  drivers/extcon/extcon-usb-gpio.c | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
> index 9c925b0..090f65f 100644
> --- a/drivers/extcon/extcon-usb-gpio.c
> +++ b/drivers/extcon/extcon-usb-gpio.c
> @@ -41,6 +41,7 @@ struct usb_extcon_info {
>  
>  	unsigned long debounce_jiffies;
>  	struct delayed_work wq_detcable;
> +	unsigned int gpio_debounce_timeout_ms;

You better to use the "debounce_usecs" name
because the unit of debounce time is usec.

>  };
>  
>  static const unsigned int usb_extcon_cable[] = {
> @@ -133,6 +134,11 @@ static int usb_extcon_probe(struct platform_device *pdev)
>  	if (IS_ERR(info->vbus_gpiod))
>  		return PTR_ERR(info->vbus_gpiod);
>  
> +	ret = of_property_read_u32(np, "debounce-timeout-ms",
> +			     &info->gpio_debounce_timeout_ms);

I prefer to use the 'input-debounce' property name
Because the pinctrl-bindings.txt[1] gives the guide
for the generic name of debounce.
[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- "debounce-timeout-ms" -> "input-debounce"

> +	if (ret)
> +		info->gpio_debounce_timeout_ms = USB_GPIO_DEBOUNCE_MS;
> +
>  	info->edev = devm_extcon_dev_allocate(dev, usb_extcon_cable);
>  	if (IS_ERR(info->edev)) {
>  		dev_err(dev, "failed to allocate extcon device\n");
> @@ -147,13 +153,14 @@ static int usb_extcon_probe(struct platform_device *pdev)
>  
>  	if (info->id_gpiod)
>  		ret = gpiod_set_debounce(info->id_gpiod,
> -					 USB_GPIO_DEBOUNCE_MS * 1000);
> +					 info->gpio_debounce_timeout_ms * 1000);
>  	if (!ret && info->vbus_gpiod)
>  		ret = gpiod_set_debounce(info->vbus_gpiod,
> -					 USB_GPIO_DEBOUNCE_MS * 1000);
> +					 info->gpio_debounce_timeout_ms * 1000);
>  
>  	if (ret < 0)
> -		info->debounce_jiffies = msecs_to_jiffies(USB_GPIO_DEBOUNCE_MS);
> +		info->debounce_jiffies = msecs_to_jiffies(
> +						info->gpio_debounce_timeout_ms);
>  
>  	INIT_DELAYED_WORK(&info->wq_detcable, usb_extcon_detect_cable);
>  
> 

-- 
Best Regards,
Chanwoo Choi
Samsung Electronics

Re: [PATCH 1/2] Documentation: dt: extcon: add optional debounce-timeout-ms attribute

[Chanwoo Choi]

Hi,

On 2017년 10월 16일 16:34, Raveendra Padasalagi wrote:
> Add documentation on optional dt attribute "debounce-timeout-ms"
> in extcon node to capture user specified timeout value for id
> and vbus gpio detection.
> 
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Srinath Mannam <srinath.mannam-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> index dfc14f7..6df6d69 100644
> --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> @@ -10,6 +10,10 @@ Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
>  - id-gpio: gpio for USB ID pin. See gpio binding.
>  - vbus-gpio: gpio for USB VBUS pin.
>  
> +Optional properties:
> +- debounce-timeout-ms: debounce timeout value for id and vbus gpio in
> +  milliseconds.

I recommend that you use the 'input-debounce' propery name
instead of 'debounce-timeout-ms'.

When I check the pinctrl-bindings.txt[1] in order to check
the property name for debounce. The documentation[1] specify
the generic pinconfig property name.
[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

> +
>  Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
>  	extcon_usb1 {
>  		compatible = "linux,extcon-usb-gpio";
> 
-- 
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] Documentation: dt: extcon: add optional debounce-timeout-ms attribute

[Chanwoo Choi]

Hi,

On 2017년 10월 16일 16:34, Raveendra Padasalagi wrote:
> Add documentation on optional dt attribute "debounce-timeout-ms"
> in extcon node to capture user specified timeout value for id
> and vbus gpio detection.
> 
> Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
> Reviewed-by: Ray Jui <ray.jui@broadcom.com>
> Reviewed-by: Srinath Mannam <srinath.mannam@broadcom.com>
> ---
>  Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> index dfc14f7..6df6d69 100644
> --- a/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> +++ b/Documentation/devicetree/bindings/extcon/extcon-usb-gpio.txt
> @@ -10,6 +10,10 @@ Either one of id-gpio or vbus-gpio must be present. Both can be present as well.
>  - id-gpio: gpio for USB ID pin. See gpio binding.
>  - vbus-gpio: gpio for USB VBUS pin.
>  
> +Optional properties:
> +- debounce-timeout-ms: debounce timeout value for id and vbus gpio in
> +  milliseconds.

I recommend that you use the 'input-debounce' propery name
instead of 'debounce-timeout-ms'.

When I check the pinctrl-bindings.txt[1] in order to check
the property name for debounce. The documentation[1] specify
the generic pinconfig property name.
[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

> +
>  Example: Examples of extcon-usb-gpio node in dra7-evm.dts as listed below:
>  	extcon_usb1 {
>  		compatible = "linux,extcon-usb-gpio";
> 
-- 
Best Regards,
Chanwoo Choi
Samsung Electronics