All of lore.kernel.org
 help / color / mirror / Atom feed
* About promis mode
@ 2017-12-28 10:07 zhj
  2017-12-28 20:09 ` Ben Greear
  0 siblings, 1 reply; 2+ messages in thread
From: zhj @ 2017-12-28 10:07 UTC (permalink / raw)
  To: ath10k

Hi,
I used to work on the AR9344+AR9382 platform (using openwrt+ath9k driver) to
achieve the following functions: setting up Promiscuous mode, scanning all
channels,capturing radio packets, If finding AP fishing, then sending deauth
packets to break illegal connections.

Now we use ath10k to drive QCA988X (openwrt platform, QCA956X+QCA988X),
which can set up promiscuous mode to catch wireless packets, but cannot send
packets to break connection. However 2.4G wireless network card can achieve
the above functions(including the switching channel).

Can this be done on QCA988X? 
Where is there a patch to implement this function?



_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: About promis mode
  2017-12-28 10:07 About promis mode zhj
@ 2017-12-28 20:09 ` Ben Greear
  0 siblings, 0 replies; 2+ messages in thread
From: Ben Greear @ 2017-12-28 20:09 UTC (permalink / raw)
  To: zhj, ath10k

On 12/28/2017 02:07 AM, zhj wrote:
> Hi,
> I used to work on the AR9344+AR9382 platform (using openwrt+ath9k driver) to
> achieve the following functions: setting up Promiscuous mode, scanning all
> channels,capturing radio packets, If finding AP fishing, then sending deauth
> packets to break illegal connections.
>
> Now we use ath10k to drive QCA988X (openwrt platform, QCA956X+QCA988X),
> which can set up promiscuous mode to catch wireless packets, but cannot send
> packets to break connection. However 2.4G wireless network card can achieve
> the above functions(including the switching channel).
>
> Can this be done on QCA988X?
> Where is there a patch to implement this function?

I think this will require modified firmware.  I recently tested some improvements
to raw tx on monitor devices with CT firmware...you might give it a try.  It is
available in LEDE already, though the new features that allows specifying the rate-code
is only in beta wave-1 firmware and drivers:

http://www.candelatech.com/ath10k.php

Thanks,
Ben

>
>
>
> _______________________________________________
> ath10k mailing list
> ath10k@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/ath10k
>


-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2017-12-28 17:35 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-28 10:07 About promis mode zhj
2017-12-28 20:09 ` Ben Greear

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.