From: zhong jiang <zhongjiang@huawei.com>
To: Michael Ellerman <mpe@ellerman.id.au>
Cc: tony.luck@intel.com, fenghua.yu@intel.com,
benh@kernel.crashing.org, paulus@samba.org, oleg@redhat.com,
rppt@linux.vnet.ibm.com, dhowells@redhat.com,
akpm@linux-foundation.org, viro@zeniv.linux.org.uk,
linux-ia64@vger.kernel.org, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 2/2] powerpc: Use ARRAY_SIZE to replace its implementation
Date: Tue, 14 Aug 2018 10:28:43 +0000 [thread overview]
Message-ID: <5B72AEDB.70505@huawei.com> (raw)
In-Reply-To: <874lfxjnzl.fsf@concordia.ellerman.id.au>
On 2018/8/14 17:28, Michael Ellerman wrote:
> zhong jiang <zhongjiang@huawei.com> writes:
>> Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element.
>> So just replace it.
>>
>> Signed-off-by: zhong jiang <zhongjiang@huawei.com>
>> ---
>> arch/powerpc/xmon/ppc-opc.c | 12 ++++--------
>> 1 file changed, 4 insertions(+), 8 deletions(-)
> This code is copied from binutils and we don't want to needlessly cause
> it to diverge from the binutils copy.
>
> So thanks but no thanks.
Thank you for clarification.
Sincerely
zhong jiang
> cheers
>
>> diff --git a/arch/powerpc/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c
>> index ac2b55b..f3f57a1 100644
>> --- a/arch/powerpc/xmon/ppc-opc.c
>> +++ b/arch/powerpc/xmon/ppc-opc.c
>> @@ -966,8 +966,7 @@
>> { 0xff, 11, NULL, NULL, PPC_OPERAND_SIGNOPT },
>> };
>>
>> -const unsigned int num_powerpc_operands = (sizeof (powerpc_operands)
>> - / sizeof (powerpc_operands[0]));
>> +const unsigned int num_powerpc_operands = ARRAY_SIZE(powerpc_operands);
>>
>> /* The functions used to insert and extract complicated operands. */
>>
>> @@ -6980,8 +6979,7 @@
>> {"fcfidu.", XRC(63,974,1), XRA_MASK, POWER7|PPCA2, PPCVLE, {FRT, FRB}},
>> };
>>
>> -const int powerpc_num_opcodes >> - sizeof (powerpc_opcodes) / sizeof (powerpc_opcodes[0]);
>> +const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes);
>> \f
>> /* The VLE opcode table.
>>
>> @@ -7219,8 +7217,7 @@
>> {"se_bl", BD8(58,0,1), BD8_MASK, PPCVLE, 0, {B8}},
>> };
>>
>> -const int vle_num_opcodes >> - sizeof (vle_opcodes) / sizeof (vle_opcodes[0]);
>> +const int vle_num_opcodes = ARRAY_SIZE(vle_opcodes);
>> \f
>> /* The macro table. This is only used by the assembler. */
>>
>> @@ -7288,5 +7285,4 @@
>> {"e_clrlslwi",4, PPCVLE, "e_rlwinm %0,%1,%3,(%2)-(%3),31-(%3)"},
>> };
>>
>> -const int powerpc_num_macros >> - sizeof (powerpc_macros) / sizeof (powerpc_macros[0]);
>> +const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros);
>> --
>> 1.7.12.4
> .
>
WARNING: multiple messages have this Message-ID (diff)
From: zhong jiang <zhongjiang@huawei.com>
To: Michael Ellerman <mpe@ellerman.id.au>
Cc: <tony.luck@intel.com>, <fenghua.yu@intel.com>,
<benh@kernel.crashing.org>, <paulus@samba.org>, <oleg@redhat.com>,
<rppt@linux.vnet.ibm.com>, <dhowells@redhat.com>,
<akpm@linux-foundation.org>, <viro@zeniv.linux.org.uk>,
<linux-ia64@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linuxppc-dev@lists.ozlabs.org>
Subject: Re: [PATCH 2/2] powerpc: Use ARRAY_SIZE to replace its implementation
Date: Tue, 14 Aug 2018 18:28:43 +0800 [thread overview]
Message-ID: <5B72AEDB.70505@huawei.com> (raw)
In-Reply-To: <874lfxjnzl.fsf@concordia.ellerman.id.au>
On 2018/8/14 17:28, Michael Ellerman wrote:
> zhong jiang <zhongjiang@huawei.com> writes:
>> Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element.
>> So just replace it.
>>
>> Signed-off-by: zhong jiang <zhongjiang@huawei.com>
>> ---
>> arch/powerpc/xmon/ppc-opc.c | 12 ++++--------
>> 1 file changed, 4 insertions(+), 8 deletions(-)
> This code is copied from binutils and we don't want to needlessly cause
> it to diverge from the binutils copy.
>
> So thanks but no thanks.
Thank you for clarification.
Sincerely
zhong jiang
> cheers
>
>> diff --git a/arch/powerpc/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c
>> index ac2b55b..f3f57a1 100644
>> --- a/arch/powerpc/xmon/ppc-opc.c
>> +++ b/arch/powerpc/xmon/ppc-opc.c
>> @@ -966,8 +966,7 @@
>> { 0xff, 11, NULL, NULL, PPC_OPERAND_SIGNOPT },
>> };
>>
>> -const unsigned int num_powerpc_operands = (sizeof (powerpc_operands)
>> - / sizeof (powerpc_operands[0]));
>> +const unsigned int num_powerpc_operands = ARRAY_SIZE(powerpc_operands);
>>
>> /* The functions used to insert and extract complicated operands. */
>>
>> @@ -6980,8 +6979,7 @@
>> {"fcfidu.", XRC(63,974,1), XRA_MASK, POWER7|PPCA2, PPCVLE, {FRT, FRB}},
>> };
>>
>> -const int powerpc_num_opcodes =
>> - sizeof (powerpc_opcodes) / sizeof (powerpc_opcodes[0]);
>> +const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes);
>> \f
>> /* The VLE opcode table.
>>
>> @@ -7219,8 +7217,7 @@
>> {"se_bl", BD8(58,0,1), BD8_MASK, PPCVLE, 0, {B8}},
>> };
>>
>> -const int vle_num_opcodes =
>> - sizeof (vle_opcodes) / sizeof (vle_opcodes[0]);
>> +const int vle_num_opcodes = ARRAY_SIZE(vle_opcodes);
>> \f
>> /* The macro table. This is only used by the assembler. */
>>
>> @@ -7288,5 +7285,4 @@
>> {"e_clrlslwi",4, PPCVLE, "e_rlwinm %0,%1,%3,(%2)-(%3),31-(%3)"},
>> };
>>
>> -const int powerpc_num_macros =
>> - sizeof (powerpc_macros) / sizeof (powerpc_macros[0]);
>> +const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros);
>> --
>> 1.7.12.4
> .
>
next prev parent reply other threads:[~2018-08-14 10:28 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-14 2:46 [PATCH 0/2] Use ARRAY_SIZE to replace its implementation zhong jiang
2018-08-14 2:46 ` zhong jiang
2018-08-14 2:46 ` [PATCH 1/2] ia64: " zhong jiang
2018-08-14 2:46 ` zhong jiang
2018-08-14 4:45 ` Joe Perches
2018-08-14 4:45 ` Joe Perches
2018-08-14 4:57 ` zhong jiang
2018-08-14 4:57 ` zhong jiang
2018-08-14 2:46 ` [PATCH 2/2] powerpc: " zhong jiang
2018-08-14 2:46 ` zhong jiang
2018-08-14 4:49 ` Joe Perches
2018-08-14 4:49 ` Joe Perches
2018-08-14 9:28 ` Michael Ellerman
2018-08-14 9:28 ` Michael Ellerman
2018-08-14 10:28 ` zhong jiang [this message]
2018-08-14 10:28 ` zhong jiang
2018-08-14 16:18 ` [PATCH 0/2] " David Howells
2018-08-14 16:18 ` David Howells
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5B72AEDB.70505@huawei.com \
--to=zhongjiang@huawei.com \
--cc=akpm@linux-foundation.org \
--cc=benh@kernel.crashing.org \
--cc=dhowells@redhat.com \
--cc=fenghua.yu@intel.com \
--cc=linux-ia64@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=oleg@redhat.com \
--cc=paulus@samba.org \
--cc=rppt@linux.vnet.ibm.com \
--cc=tony.luck@intel.com \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.