From: zhong jiang <zhongjiang@huawei.com>
To: jikos@kernel.org, benjamin.tissoires@redhat.com
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] HID: logitech: fix a used uninitialized GCC warning
Date: Fri, 21 Sep 2018 09:46:54 +0800 [thread overview]
Message-ID: <5BA44D8E.3070708@huawei.com> (raw)
In-Reply-To: <1536824470-36659-1-git-send-email-zhongjiang@huawei.com>
Hi Jiri
Can you pick up the patch?
Thanks
zhong jiang
On 2018/9/13 15:41, zhong jiang wrote:
> Fix the following compile warning:
>
> drivers/hid/hid-logitech-hidpp.c: In function 'hi_res_scroll_enable':
> drivers/hid/hid-logitech-hidpp.c:2714:54: warning: 'multiplier' may be used uninitialized in this function [-Wmaybe-uninitialized]
> hidpp->vertical_wheel_counter.resolution_multiplier = multiplier;
>
> Signed-off-by: zhong jiang <zhongjiang@huawei.com>
> ---
> v1->v2:
> According to Benjamin's suggestion, To initialize the value
> and remove the duplicated assignement.
>
> drivers/hid/hid-logitech-hidpp.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
> index 5f0c080..f012808 100644
> --- a/drivers/hid/hid-logitech-hidpp.c
> +++ b/drivers/hid/hid-logitech-hidpp.c
> @@ -1231,7 +1231,6 @@ static int hidpp_hrw_get_wheel_capability(struct hidpp_device *hidpp,
> *multiplier = response.fap.params[0];
> return 0;
> return_default:
> - *multiplier = 8;
> hid_warn(hidpp->hid_dev,
> "Couldn't get wheel multiplier (error %d), assuming %d.\n",
> ret, *multiplier);
> @@ -2696,7 +2695,7 @@ static int hi_res_scroll_look_up_microns(__u32 product_id)
> static int hi_res_scroll_enable(struct hidpp_device *hidpp)
> {
> int ret;
> - u8 multiplier;
> + u8 multiplier = 8;
>
> if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2121) {
> ret = hidpp_hrw_set_wheel_mode(hidpp, false, true, false);
> @@ -2704,10 +2703,9 @@ static int hi_res_scroll_enable(struct hidpp_device *hidpp)
> } else if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2120) {
> ret = hidpp_hrs_set_highres_scrolling_mode(hidpp, true,
> &multiplier);
> - } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */ {
> + } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */
> ret = hidpp10_enable_scrolling_acceleration(hidpp);
> - multiplier = 8;
> - }
> +
> if (ret)
> return ret;
>
WARNING: multiple messages have this Message-ID (diff)
From: zhong jiang <zhongjiang@huawei.com>
To: <jikos@kernel.org>, <benjamin.tissoires@redhat.com>
Cc: <linux-input@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] HID: logitech: fix a used uninitialized GCC warning
Date: Fri, 21 Sep 2018 09:46:54 +0800 [thread overview]
Message-ID: <5BA44D8E.3070708@huawei.com> (raw)
In-Reply-To: <1536824470-36659-1-git-send-email-zhongjiang@huawei.com>
Hi Jiri
Can you pick up the patch?
Thanks
zhong jiang
On 2018/9/13 15:41, zhong jiang wrote:
> Fix the following compile warning:
>
> drivers/hid/hid-logitech-hidpp.c: In function 'hi_res_scroll_enable':
> drivers/hid/hid-logitech-hidpp.c:2714:54: warning: 'multiplier' may be used uninitialized in this function [-Wmaybe-uninitialized]
> hidpp->vertical_wheel_counter.resolution_multiplier = multiplier;
>
> Signed-off-by: zhong jiang <zhongjiang@huawei.com>
> ---
> v1->v2:
> According to Benjamin's suggestion, To initialize the value
> and remove the duplicated assignement.
>
> drivers/hid/hid-logitech-hidpp.c | 8 +++-----
> 1 file changed, 3 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
> index 5f0c080..f012808 100644
> --- a/drivers/hid/hid-logitech-hidpp.c
> +++ b/drivers/hid/hid-logitech-hidpp.c
> @@ -1231,7 +1231,6 @@ static int hidpp_hrw_get_wheel_capability(struct hidpp_device *hidpp,
> *multiplier = response.fap.params[0];
> return 0;
> return_default:
> - *multiplier = 8;
> hid_warn(hidpp->hid_dev,
> "Couldn't get wheel multiplier (error %d), assuming %d.\n",
> ret, *multiplier);
> @@ -2696,7 +2695,7 @@ static int hi_res_scroll_look_up_microns(__u32 product_id)
> static int hi_res_scroll_enable(struct hidpp_device *hidpp)
> {
> int ret;
> - u8 multiplier;
> + u8 multiplier = 8;
>
> if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2121) {
> ret = hidpp_hrw_set_wheel_mode(hidpp, false, true, false);
> @@ -2704,10 +2703,9 @@ static int hi_res_scroll_enable(struct hidpp_device *hidpp)
> } else if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_X2120) {
> ret = hidpp_hrs_set_highres_scrolling_mode(hidpp, true,
> &multiplier);
> - } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */ {
> + } else /* if (hidpp->quirks & HIDPP_QUIRK_HI_RES_SCROLL_1P0) */
> ret = hidpp10_enable_scrolling_acceleration(hidpp);
> - multiplier = 8;
> - }
> +
> if (ret)
> return ret;
>
next prev parent reply other threads:[~2018-09-21 1:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-13 7:41 [PATCH v2] HID: logitech: fix a used uninitialized GCC warning zhong jiang
2018-09-13 7:41 ` zhong jiang
2018-09-21 1:46 ` zhong jiang [this message]
2018-09-21 1:46 ` zhong jiang
2018-09-24 9:31 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5BA44D8E.3070708@huawei.com \
--to=zhongjiang@huawei.com \
--cc=benjamin.tissoires@redhat.com \
--cc=jikos@kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.