[Ocfs2-devel] [PATCH RESEND] ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry

[Ocfs2-devel] [PATCH RESEND] ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry

[Changwei Ge]

From: Changwei Ge <ge.changwei@h3c.com>

Somehow, file system metadata was corrupted, which causes
ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().

According to the original design intention, if above happens we should
skip the problematic block and continue to retrieve dir entry. But there
is obviouse misuse of brelse around related code.

After failure of ocfs2_check_dir_entry(), currunt code just moves to next
position and uses the problematic buffer head again and again during
which the problematic buffer head is released for multiple times. I
suppose, this a serious issue which is long-lived in ocfs2. This may
cause other file systems which is also used in a the same host insane.

So we should also consider about bakcporting this patch into
linux -stable.

Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
Cc: stable at vger.kernel.org
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
---
 fs/ocfs2/dir.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index b048d4f..c121abb 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -1897,8 +1897,7 @@ static int ocfs2_dir_foreach_blk_el(struct inode *inode,
 				/* On error, skip the f_pos to the
 				   next block. */
 				ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
-				brelse(bh);
-				continue;
+				break;
 			}
 			if (le64_to_cpu(de->inode)) {
 				unsigned char d_type = DT_UNKNOWN;
-- 
2.7.4

[PATCH RESEND] ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry

[Changwei Ge]

From: Changwei Ge <ge.changwei@h3c.com>

Somehow, file system metadata was corrupted, which causes
ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().

According to the original design intention, if above happens we should
skip the problematic block and continue to retrieve dir entry. But there
is obviouse misuse of brelse around related code.

After failure of ocfs2_check_dir_entry(), currunt code just moves to next
position and uses the problematic buffer head again and again during
which the problematic buffer head is released for multiple times. I
suppose, this a serious issue which is long-lived in ocfs2. This may
cause other file systems which is also used in a the same host insane.

So we should also consider about bakcporting this patch into
linux -stable.

Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
Cc: stable@vger.kernel.org
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
---
 fs/ocfs2/dir.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index b048d4f..c121abb 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -1897,8 +1897,7 @@ static int ocfs2_dir_foreach_blk_el(struct inode *inode,
 				/* On error, skip the f_pos to the
 				   next block. */
 				ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
-				brelse(bh);
-				continue;
+				break;
 			}
 			if (le64_to_cpu(de->inode)) {
 				unsigned char d_type = DT_UNKNOWN;
-- 
2.7.4

[Ocfs2-devel] [PATCH RESEND] ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry

[piaojun]

Hi Changwei,

On 2018/5/28 22:40, Changwei Ge wrote:
> From: Changwei Ge <ge.changwei@h3c.com>
> 
> Somehow, file system metadata was corrupted, which causes
> ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
> 
> According to the original design intention, if above happens we should
> skip the problematic block and continue to retrieve dir entry. But there
> is obviouse misuse of brelse around related code.
> 
> After failure of ocfs2_check_dir_entry(), currunt code just moves to next
> position and uses the problematic buffer head again and again during
> which the problematic buffer head is released for multiple times. I
> suppose, this a serious issue which is long-lived in ocfs2. This may
> cause other file systems which is also used in a the same host insane.
> 
> So we should also consider about bakcporting this patch into
> linux -stable.
> 
> Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
> Cc: stable at vger.kernel.org
> Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
> ---
>  fs/ocfs2/dir.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
> index b048d4f..c121abb 100644
> --- a/fs/ocfs2/dir.c
> +++ b/fs/ocfs2/dir.c
> @@ -1897,8 +1897,7 @@ static int ocfs2_dir_foreach_blk_el(struct inode *inode,
>  				/* On error, skip the f_pos to the
>  				   next block. */
>  				ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
> -				brelse(bh);
> -				continue;
> +				break;

I guess return is more appropriate than break here as it will cause double
free buffer:

"
ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
brelse(bh);
break;
"

"
brelse(bh);
bh = NULL;
if (!persist && stored)
	break;
"

Thanks,
Jun

>  			}
>  			if (le64_to_cpu(de->inode)) {
>  				unsigned char d_type = DT_UNKNOWN;
> 

Re: [Ocfs2-devel] [PATCH RESEND] ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry

[piaojun]

Hi Changwei,

On 2018/5/28 22:40, Changwei Ge wrote:
> From: Changwei Ge <ge.changwei@h3c.com>
> 
> Somehow, file system metadata was corrupted, which causes
> ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
> 
> According to the original design intention, if above happens we should
> skip the problematic block and continue to retrieve dir entry. But there
> is obviouse misuse of brelse around related code.
> 
> After failure of ocfs2_check_dir_entry(), currunt code just moves to next
> position and uses the problematic buffer head again and again during
> which the problematic buffer head is released for multiple times. I
> suppose, this a serious issue which is long-lived in ocfs2. This may
> cause other file systems which is also used in a the same host insane.
> 
> So we should also consider about bakcporting this patch into
> linux -stable.
> 
> Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
> Cc: stable@vger.kernel.org
> Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
> ---
>  fs/ocfs2/dir.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
> index b048d4f..c121abb 100644
> --- a/fs/ocfs2/dir.c
> +++ b/fs/ocfs2/dir.c
> @@ -1897,8 +1897,7 @@ static int ocfs2_dir_foreach_blk_el(struct inode *inode,
>  				/* On error, skip the f_pos to the
>  				   next block. */
>  				ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
> -				brelse(bh);
> -				continue;
> +				break;

I guess return is more appropriate than break here as it will cause double
free buffer:

"
ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
brelse(bh);
break;
"

"
brelse(bh);
bh = NULL;
if (!persist && stored)
	break;
"

Thanks,
Jun

>  			}
>  			if (le64_to_cpu(de->inode)) {
>  				unsigned char d_type = DT_UNKNOWN;
> 

[Ocfs2-devel] [PATCH RESEND] ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry

[Changwei Ge]

Hi Jun,

Thanks for looking into this, my code from Linux mainline is not looked like yours...

On 2018/11/10 14:36, piaojun wrote:
> Hi Changwei,
> 
> On 2018/5/28 22:40, Changwei Ge wrote:
>> From: Changwei Ge <ge.changwei@h3c.com>
>>
>> Somehow, file system metadata was corrupted, which causes
>> ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
>>
>> According to the original design intention, if above happens we should
>> skip the problematic block and continue to retrieve dir entry. But there
>> is obviouse misuse of brelse around related code.
>>
>> After failure of ocfs2_check_dir_entry(), currunt code just moves to next
>> position and uses the problematic buffer head again and again during
>> which the problematic buffer head is released for multiple times. I
>> suppose, this a serious issue which is long-lived in ocfs2. This may
>> cause other file systems which is also used in a the same host insane.
>>
>> So we should also consider about bakcporting this patch into
>> linux -stable.
>>
>> Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
>> Cc: stable at vger.kernel.org
>> Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
>> ---
>>   fs/ocfs2/dir.c | 3 +--
>>   1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
>> index b048d4f..c121abb 100644
>> --- a/fs/ocfs2/dir.c
>> +++ b/fs/ocfs2/dir.c
>> @@ -1897,8 +1897,7 @@ static int ocfs2_dir_foreach_blk_el(struct inode *inode,
>>   				/* On error, skip the f_pos to the
>>   				   next block. */
>>   				ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
>> -				brelse(bh);
>> -				continue;
>> +				break;
> 
> I guess return is more appropriate than break here as it will cause double
> free buffer:
> 
> "
> ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
> brelse(bh);
> break;
> "

Linux mainline should not have 'brelse(bh)', could your please rebase your tree?

'''
ccd979bdb (Mark Fasheh         2005-12-15 14:31:24 -0800 1897)                          /* On error, skip the f_pos to the
ccd979bdb (Mark Fasheh         2005-12-15 14:31:24 -0800 1898)                             next block. */
3704412bd (Al Viro             2013-05-22 21:06:00 -0400 1899)                          ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
29aa30167 (Changwei Ge         2018-11-02 15:48:15 -0700 1900)                          break;
'''
> 
> "
> brelse(bh);
> bh = NULL;
> if (!persist && stored)
> 	break;
> "
> 
> Thanks,
> Jun
> 
>>   			}
>>   			if (le64_to_cpu(de->inode)) {
>>   				unsigned char d_type = DT_UNKNOWN;
>>
> 
> _______________________________________________
> Ocfs2-devel mailing list
> Ocfs2-devel at oss.oracle.com
> https://oss.oracle.com/mailman/listinfo/ocfs2-devel
> 

Re: [Ocfs2-devel] [PATCH RESEND] ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry

[Changwei Ge]

Hi Jun,

Thanks for looking into this, my code from Linux mainline is not looked like yours...

On 2018/11/10 14:36, piaojun wrote:
> Hi Changwei,
> 
> On 2018/5/28 22:40, Changwei Ge wrote:
>> From: Changwei Ge <ge.changwei@h3c.com>
>>
>> Somehow, file system metadata was corrupted, which causes
>> ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
>>
>> According to the original design intention, if above happens we should
>> skip the problematic block and continue to retrieve dir entry. But there
>> is obviouse misuse of brelse around related code.
>>
>> After failure of ocfs2_check_dir_entry(), currunt code just moves to next
>> position and uses the problematic buffer head again and again during
>> which the problematic buffer head is released for multiple times. I
>> suppose, this a serious issue which is long-lived in ocfs2. This may
>> cause other file systems which is also used in a the same host insane.
>>
>> So we should also consider about bakcporting this patch into
>> linux -stable.
>>
>> Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
>> ---
>>   fs/ocfs2/dir.c | 3 +--
>>   1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
>> index b048d4f..c121abb 100644
>> --- a/fs/ocfs2/dir.c
>> +++ b/fs/ocfs2/dir.c
>> @@ -1897,8 +1897,7 @@ static int ocfs2_dir_foreach_blk_el(struct inode *inode,
>>   				/* On error, skip the f_pos to the
>>   				   next block. */
>>   				ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
>> -				brelse(bh);
>> -				continue;
>> +				break;
> 
> I guess return is more appropriate than break here as it will cause double
> free buffer:
> 
> "
> ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
> brelse(bh);
> break;
> "

Linux mainline should not have 'brelse(bh)', could your please rebase your tree?

'''
ccd979bdb (Mark Fasheh         2005-12-15 14:31:24 -0800 1897)                          /* On error, skip the f_pos to the
ccd979bdb (Mark Fasheh         2005-12-15 14:31:24 -0800 1898)                             next block. */
3704412bd (Al Viro             2013-05-22 21:06:00 -0400 1899)                          ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
29aa30167 (Changwei Ge         2018-11-02 15:48:15 -0700 1900)                          break;
'''
> 
> "
> brelse(bh);
> bh = NULL;
> if (!persist && stored)
> 	break;
> "
> 
> Thanks,
> Jun
> 
>>   			}
>>   			if (le64_to_cpu(de->inode)) {
>>   				unsigned char d_type = DT_UNKNOWN;
>>
> 
> _______________________________________________
> Ocfs2-devel mailing list
> Ocfs2-devel@oss.oracle.com
> https://oss.oracle.com/mailman/listinfo/ocfs2-devel
> 

[Ocfs2-devel] [PATCH RESEND] ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry

[piaojun]

Hi Changwei,

Sorry for the oversight for your patch. There is nothing wrong.

Thanks,
Jun

On 2018/11/10 15:58, Changwei Ge wrote:
> Hi Jun,
> 
> Thanks for looking into this, my code from Linux mainline is not looked like yours...
> 
> On 2018/11/10 14:36, piaojun wrote:
>> Hi Changwei,
>>
>> On 2018/5/28 22:40, Changwei Ge wrote:
>>> From: Changwei Ge <ge.changwei@h3c.com>
>>>
>>> Somehow, file system metadata was corrupted, which causes
>>> ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
>>>
>>> According to the original design intention, if above happens we should
>>> skip the problematic block and continue to retrieve dir entry. But there
>>> is obviouse misuse of brelse around related code.
>>>
>>> After failure of ocfs2_check_dir_entry(), currunt code just moves to next
>>> position and uses the problematic buffer head again and again during
>>> which the problematic buffer head is released for multiple times. I
>>> suppose, this a serious issue which is long-lived in ocfs2. This may
>>> cause other file systems which is also used in a the same host insane.
>>>
>>> So we should also consider about bakcporting this patch into
>>> linux -stable.
>>>
>>> Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
>>> Cc: stable at vger.kernel.org
>>> Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
>>> ---
>>>   fs/ocfs2/dir.c | 3 +--
>>>   1 file changed, 1 insertion(+), 2 deletions(-)
>>>
>>> diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
>>> index b048d4f..c121abb 100644
>>> --- a/fs/ocfs2/dir.c
>>> +++ b/fs/ocfs2/dir.c
>>> @@ -1897,8 +1897,7 @@ static int ocfs2_dir_foreach_blk_el(struct inode *inode,
>>>   				/* On error, skip the f_pos to the
>>>   				   next block. */
>>>   				ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
>>> -				brelse(bh);
>>> -				continue;
>>> +				break;
>>
>> I guess return is more appropriate than break here as it will cause double
>> free buffer:
>>
>> "
>> ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
>> brelse(bh);
>> break;
>> "
> 
> Linux mainline should not have 'brelse(bh)', could your please rebase your tree?
> 
> '''
> ccd979bdb (Mark Fasheh         2005-12-15 14:31:24 -0800 1897)                          /* On error, skip the f_pos to the
> ccd979bdb (Mark Fasheh         2005-12-15 14:31:24 -0800 1898)                             next block. */
> 3704412bd (Al Viro             2013-05-22 21:06:00 -0400 1899)                          ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
> 29aa30167 (Changwei Ge         2018-11-02 15:48:15 -0700 1900)                          break;
> '''
>>
>> "
>> brelse(bh);
>> bh = NULL;
>> if (!persist && stored)
>> 	break;
>> "
>>
>> Thanks,
>> Jun
>>
>>>   			}
>>>   			if (le64_to_cpu(de->inode)) {
>>>   				unsigned char d_type = DT_UNKNOWN;
>>>
>>
>> _______________________________________________
>> Ocfs2-devel mailing list
>> Ocfs2-devel at oss.oracle.com
>> https://oss.oracle.com/mailman/listinfo/ocfs2-devel
>>
> .
> 

Re: [Ocfs2-devel] [PATCH RESEND] ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry

[piaojun]

Hi Changwei,

Sorry for the oversight for your patch. There is nothing wrong.

Thanks,
Jun

On 2018/11/10 15:58, Changwei Ge wrote:
> Hi Jun,
> 
> Thanks for looking into this, my code from Linux mainline is not looked like yours...
> 
> On 2018/11/10 14:36, piaojun wrote:
>> Hi Changwei,
>>
>> On 2018/5/28 22:40, Changwei Ge wrote:
>>> From: Changwei Ge <ge.changwei@h3c.com>
>>>
>>> Somehow, file system metadata was corrupted, which causes
>>> ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
>>>
>>> According to the original design intention, if above happens we should
>>> skip the problematic block and continue to retrieve dir entry. But there
>>> is obviouse misuse of brelse around related code.
>>>
>>> After failure of ocfs2_check_dir_entry(), currunt code just moves to next
>>> position and uses the problematic buffer head again and again during
>>> which the problematic buffer head is released for multiple times. I
>>> suppose, this a serious issue which is long-lived in ocfs2. This may
>>> cause other file systems which is also used in a the same host insane.
>>>
>>> So we should also consider about bakcporting this patch into
>>> linux -stable.
>>>
>>> Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
>>> Cc: stable@vger.kernel.org
>>> Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
>>> ---
>>>   fs/ocfs2/dir.c | 3 +--
>>>   1 file changed, 1 insertion(+), 2 deletions(-)
>>>
>>> diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
>>> index b048d4f..c121abb 100644
>>> --- a/fs/ocfs2/dir.c
>>> +++ b/fs/ocfs2/dir.c
>>> @@ -1897,8 +1897,7 @@ static int ocfs2_dir_foreach_blk_el(struct inode *inode,
>>>   				/* On error, skip the f_pos to the
>>>   				   next block. */
>>>   				ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
>>> -				brelse(bh);
>>> -				continue;
>>> +				break;
>>
>> I guess return is more appropriate than break here as it will cause double
>> free buffer:
>>
>> "
>> ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
>> brelse(bh);
>> break;
>> "
> 
> Linux mainline should not have 'brelse(bh)', could your please rebase your tree?
> 
> '''
> ccd979bdb (Mark Fasheh         2005-12-15 14:31:24 -0800 1897)                          /* On error, skip the f_pos to the
> ccd979bdb (Mark Fasheh         2005-12-15 14:31:24 -0800 1898)                             next block. */
> 3704412bd (Al Viro             2013-05-22 21:06:00 -0400 1899)                          ctx->pos = (ctx->pos | (sb->s_blocksize - 1)) + 1;
> 29aa30167 (Changwei Ge         2018-11-02 15:48:15 -0700 1900)                          break;
> '''
>>
>> "
>> brelse(bh);
>> bh = NULL;
>> if (!persist && stored)
>> 	break;
>> "
>>
>> Thanks,
>> Jun
>>
>>>   			}
>>>   			if (le64_to_cpu(de->inode)) {
>>>   				unsigned char d_type = DT_UNKNOWN;
>>>
>>
>> _______________________________________________
>> Ocfs2-devel mailing list
>> Ocfs2-devel@oss.oracle.com
>> https://oss.oracle.com/mailman/listinfo/ocfs2-devel
>>
> .
>