From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 0/3] Add Amlogic Meson GX SoC Clock Measure Driver
Date: Sun, 18 Nov 2018 10:32:51 +0100 [thread overview]
Message-ID: <5BF131C3.9040808@baylibre.com> (raw)
In-Reply-To: <75ca31ca-82f4-c9e9-0d73-29fde405c47c@baylibre.com>
Le 14/11/2018 14:17, Neil Armstrong a ?crit :
> On 14/11/2018 14:16, Neil Armstrong wrote:
>> The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal
>> clocks frequencyies.
>> The precision is determined by stepping into the divider until the counter
>> overflows.
>> The debugfs slows a pretty summary and each clock can be measured
>> individually aswell.
>>
>> Thsi patchset includes the dt-bindings, driver and the DT node added to the
>> meson-gx dtsi.
I'll respin a v3 with the comments from Martin and Meson8 & Meson8b support !
Neil
>>
>> Changes since v1 at [1]:
>> - fixed clock names
>> - added summary in debugfs and moved indivudual clocks into a subdirectory
>> - added the GX table to the match data
>>
>> Neil Armstrong (3):
>> dt-bindings: amlogic: Add Internal Clock Measurer bindings
>> soc: amlogic: Add Meson GX Clock Measure driver
>> ARM64: dts: meson-gx: Add Internal Clock Measurer node
>>
>> .../bindings/soc/amlogic/clk-measure.txt | 15 +
>> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 5 +
>> drivers/soc/amlogic/Kconfig | 8 +
>> drivers/soc/amlogic/Makefile | 1 +
>> drivers/soc/amlogic/meson-gx-clk-measure.c | 293 ++++++++++++++++++
>> 5 files changed, 322 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
>> create mode 100644 drivers/soc/amlogic/meson-gx-clk-measure.c
>>
>
> For example, the debugfs summary looks like :
>
> # cat /sys/kernel/debug/meson-clk-msr/measure_summary
> clock rate precision
> ---------------------------------------------
> ring_osc_out_ee_0 0 +/-3125Hz
> ring_osc_out_ee_1 0 +/-3125Hz
> ring_osc_out_ee_2 0 +/-3125Hz
> a53_ring_osc 0 +/-3125Hz
> gp0_pll 0 +/-3125Hz
> enci 26998438 +/-3125Hz
> clk81 166661458 +/-5208Hz
> encp 0 +/-3125Hz
> encl 0 +/-3125Hz
> vdac 26998438 +/-3125Hz
> rgmii_tx 0 +/-3125Hz
> pdm 0 +/-3125Hz
> amclk 0 +/-3125Hz
> fec_0 0 +/-3125Hz
> fec_1 0 +/-3125Hz
> fec_2 0 +/-3125Hz
> sys_pll_div16 0 +/-3125Hz
> sys_cpu_div16 0 +/-3125Hz
> hdmitx_sys 24000000 +/-3125Hz
> rtc_osc_out 32813 +/-3125Hz
> i2s_in_src0 0 +/-3125Hz
> eth_phy_ref 0 +/-3125Hz
> hdmi_todig 0 +/-3125Hz
> sc_int 0 +/-3125Hz
> sar_adc 1195313 +/-3125Hz
> mpll_test_out 0 +/-3125Hz
> vdec 0 +/-3125Hz
> mali 0 +/-3125Hz
> hdmi_tx_pixel 0 +/-3125Hz
> i958 0 +/-3125Hz
> vdin_meas 1484656250 +/-62500Hz
> pcm_sclk 0 +/-3125Hz
> pcm_mclk 0 +/-3125Hz
> eth_rx_or_rmii 50000000 +/-3125Hz
> mp0_out 0 +/-3125Hz
> fclk_div5 0 +/-3125Hz
> pwm_b 24000000 +/-3125Hz
> pwm_a 0 +/-3125Hz
> vpu 666625000 +/-20833Hz
> ddr_dpll_pt 0 +/-3125Hz
> mp1_out 0 +/-3125Hz
> mp2_out 0 +/-3125Hz
> mp3_out 0 +/-3125Hz
> nand_core 24000000 +/-3125Hz
> sd_emmc_b 0 +/-3125Hz
> sd_emmc_a 0 +/-3125Hz
> vid_pll_div_out 1484843750 +/-62500Hz
> cci 0 +/-3125Hz
> wave420l_c 0 +/-3125Hz
> wave420l_b 0 +/-3125Hz
> hcodec 0 +/-3125Hz
> alt_32k 0 +/-3125Hz
> gpio_msr 0 +/-3125Hz
> hevc 0 +/-3125Hz
> vid_lock 0 +/-3125Hz
> pwm_f 0 +/-3125Hz
> pwm_e 0 +/-3125Hz
> pwm_d 23984375 +/-3125Hz
> pwm_c 0 +/-3125Hz
> aoclkx2_int 0 +/-3125Hz
> aoclk_int 0 +/-3125Hz
> rng_ring_osc_0 66746875 +/-3125Hz
> rng_ring_osc_1 58442188 +/-3125Hz
> rng_ring_osc_2 52098438 +/-3125Hz
> rng_ring_osc_3 46662500 +/-3125Hz
> vapb 249996094 +/-7812Hz
> ge2d 249992188 +/-7812Hz
>
> On the AML-S905X-CC board.
>
> Neil
>
WARNING: multiple messages have this Message-ID (diff)
From: narmstrong@baylibre.com (Neil Armstrong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/3] Add Amlogic Meson GX SoC Clock Measure Driver
Date: Sun, 18 Nov 2018 10:32:51 +0100 [thread overview]
Message-ID: <5BF131C3.9040808@baylibre.com> (raw)
In-Reply-To: <75ca31ca-82f4-c9e9-0d73-29fde405c47c@baylibre.com>
Le 14/11/2018 14:17, Neil Armstrong a ?crit :
> On 14/11/2018 14:16, Neil Armstrong wrote:
>> The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal
>> clocks frequencyies.
>> The precision is determined by stepping into the divider until the counter
>> overflows.
>> The debugfs slows a pretty summary and each clock can be measured
>> individually aswell.
>>
>> Thsi patchset includes the dt-bindings, driver and the DT node added to the
>> meson-gx dtsi.
I'll respin a v3 with the comments from Martin and Meson8 & Meson8b support !
Neil
>>
>> Changes since v1 at [1]:
>> - fixed clock names
>> - added summary in debugfs and moved indivudual clocks into a subdirectory
>> - added the GX table to the match data
>>
>> Neil Armstrong (3):
>> dt-bindings: amlogic: Add Internal Clock Measurer bindings
>> soc: amlogic: Add Meson GX Clock Measure driver
>> ARM64: dts: meson-gx: Add Internal Clock Measurer node
>>
>> .../bindings/soc/amlogic/clk-measure.txt | 15 +
>> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 5 +
>> drivers/soc/amlogic/Kconfig | 8 +
>> drivers/soc/amlogic/Makefile | 1 +
>> drivers/soc/amlogic/meson-gx-clk-measure.c | 293 ++++++++++++++++++
>> 5 files changed, 322 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
>> create mode 100644 drivers/soc/amlogic/meson-gx-clk-measure.c
>>
>
> For example, the debugfs summary looks like :
>
> # cat /sys/kernel/debug/meson-clk-msr/measure_summary
> clock rate precision
> ---------------------------------------------
> ring_osc_out_ee_0 0 +/-3125Hz
> ring_osc_out_ee_1 0 +/-3125Hz
> ring_osc_out_ee_2 0 +/-3125Hz
> a53_ring_osc 0 +/-3125Hz
> gp0_pll 0 +/-3125Hz
> enci 26998438 +/-3125Hz
> clk81 166661458 +/-5208Hz
> encp 0 +/-3125Hz
> encl 0 +/-3125Hz
> vdac 26998438 +/-3125Hz
> rgmii_tx 0 +/-3125Hz
> pdm 0 +/-3125Hz
> amclk 0 +/-3125Hz
> fec_0 0 +/-3125Hz
> fec_1 0 +/-3125Hz
> fec_2 0 +/-3125Hz
> sys_pll_div16 0 +/-3125Hz
> sys_cpu_div16 0 +/-3125Hz
> hdmitx_sys 24000000 +/-3125Hz
> rtc_osc_out 32813 +/-3125Hz
> i2s_in_src0 0 +/-3125Hz
> eth_phy_ref 0 +/-3125Hz
> hdmi_todig 0 +/-3125Hz
> sc_int 0 +/-3125Hz
> sar_adc 1195313 +/-3125Hz
> mpll_test_out 0 +/-3125Hz
> vdec 0 +/-3125Hz
> mali 0 +/-3125Hz
> hdmi_tx_pixel 0 +/-3125Hz
> i958 0 +/-3125Hz
> vdin_meas 1484656250 +/-62500Hz
> pcm_sclk 0 +/-3125Hz
> pcm_mclk 0 +/-3125Hz
> eth_rx_or_rmii 50000000 +/-3125Hz
> mp0_out 0 +/-3125Hz
> fclk_div5 0 +/-3125Hz
> pwm_b 24000000 +/-3125Hz
> pwm_a 0 +/-3125Hz
> vpu 666625000 +/-20833Hz
> ddr_dpll_pt 0 +/-3125Hz
> mp1_out 0 +/-3125Hz
> mp2_out 0 +/-3125Hz
> mp3_out 0 +/-3125Hz
> nand_core 24000000 +/-3125Hz
> sd_emmc_b 0 +/-3125Hz
> sd_emmc_a 0 +/-3125Hz
> vid_pll_div_out 1484843750 +/-62500Hz
> cci 0 +/-3125Hz
> wave420l_c 0 +/-3125Hz
> wave420l_b 0 +/-3125Hz
> hcodec 0 +/-3125Hz
> alt_32k 0 +/-3125Hz
> gpio_msr 0 +/-3125Hz
> hevc 0 +/-3125Hz
> vid_lock 0 +/-3125Hz
> pwm_f 0 +/-3125Hz
> pwm_e 0 +/-3125Hz
> pwm_d 23984375 +/-3125Hz
> pwm_c 0 +/-3125Hz
> aoclkx2_int 0 +/-3125Hz
> aoclk_int 0 +/-3125Hz
> rng_ring_osc_0 66746875 +/-3125Hz
> rng_ring_osc_1 58442188 +/-3125Hz
> rng_ring_osc_2 52098438 +/-3125Hz
> rng_ring_osc_3 46662500 +/-3125Hz
> vapb 249996094 +/-7812Hz
> ge2d 249992188 +/-7812Hz
>
> On the AML-S905X-CC board.
>
> Neil
>
WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 0/3] Add Amlogic Meson GX SoC Clock Measure Driver
Date: Sun, 18 Nov 2018 10:32:51 +0100 [thread overview]
Message-ID: <5BF131C3.9040808@baylibre.com> (raw)
In-Reply-To: <75ca31ca-82f4-c9e9-0d73-29fde405c47c@baylibre.com>
Le 14/11/2018 14:17, Neil Armstrong a écrit :
> On 14/11/2018 14:16, Neil Armstrong wrote:
>> The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal
>> clocks frequencyies.
>> The precision is determined by stepping into the divider until the counter
>> overflows.
>> The debugfs slows a pretty summary and each clock can be measured
>> individually aswell.
>>
>> Thsi patchset includes the dt-bindings, driver and the DT node added to the
>> meson-gx dtsi.
I'll respin a v3 with the comments from Martin and Meson8 & Meson8b support !
Neil
>>
>> Changes since v1 at [1]:
>> - fixed clock names
>> - added summary in debugfs and moved indivudual clocks into a subdirectory
>> - added the GX table to the match data
>>
>> Neil Armstrong (3):
>> dt-bindings: amlogic: Add Internal Clock Measurer bindings
>> soc: amlogic: Add Meson GX Clock Measure driver
>> ARM64: dts: meson-gx: Add Internal Clock Measurer node
>>
>> .../bindings/soc/amlogic/clk-measure.txt | 15 +
>> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 5 +
>> drivers/soc/amlogic/Kconfig | 8 +
>> drivers/soc/amlogic/Makefile | 1 +
>> drivers/soc/amlogic/meson-gx-clk-measure.c | 293 ++++++++++++++++++
>> 5 files changed, 322 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/soc/amlogic/clk-measure.txt
>> create mode 100644 drivers/soc/amlogic/meson-gx-clk-measure.c
>>
>
> For example, the debugfs summary looks like :
>
> # cat /sys/kernel/debug/meson-clk-msr/measure_summary
> clock rate precision
> ---------------------------------------------
> ring_osc_out_ee_0 0 +/-3125Hz
> ring_osc_out_ee_1 0 +/-3125Hz
> ring_osc_out_ee_2 0 +/-3125Hz
> a53_ring_osc 0 +/-3125Hz
> gp0_pll 0 +/-3125Hz
> enci 26998438 +/-3125Hz
> clk81 166661458 +/-5208Hz
> encp 0 +/-3125Hz
> encl 0 +/-3125Hz
> vdac 26998438 +/-3125Hz
> rgmii_tx 0 +/-3125Hz
> pdm 0 +/-3125Hz
> amclk 0 +/-3125Hz
> fec_0 0 +/-3125Hz
> fec_1 0 +/-3125Hz
> fec_2 0 +/-3125Hz
> sys_pll_div16 0 +/-3125Hz
> sys_cpu_div16 0 +/-3125Hz
> hdmitx_sys 24000000 +/-3125Hz
> rtc_osc_out 32813 +/-3125Hz
> i2s_in_src0 0 +/-3125Hz
> eth_phy_ref 0 +/-3125Hz
> hdmi_todig 0 +/-3125Hz
> sc_int 0 +/-3125Hz
> sar_adc 1195313 +/-3125Hz
> mpll_test_out 0 +/-3125Hz
> vdec 0 +/-3125Hz
> mali 0 +/-3125Hz
> hdmi_tx_pixel 0 +/-3125Hz
> i958 0 +/-3125Hz
> vdin_meas 1484656250 +/-62500Hz
> pcm_sclk 0 +/-3125Hz
> pcm_mclk 0 +/-3125Hz
> eth_rx_or_rmii 50000000 +/-3125Hz
> mp0_out 0 +/-3125Hz
> fclk_div5 0 +/-3125Hz
> pwm_b 24000000 +/-3125Hz
> pwm_a 0 +/-3125Hz
> vpu 666625000 +/-20833Hz
> ddr_dpll_pt 0 +/-3125Hz
> mp1_out 0 +/-3125Hz
> mp2_out 0 +/-3125Hz
> mp3_out 0 +/-3125Hz
> nand_core 24000000 +/-3125Hz
> sd_emmc_b 0 +/-3125Hz
> sd_emmc_a 0 +/-3125Hz
> vid_pll_div_out 1484843750 +/-62500Hz
> cci 0 +/-3125Hz
> wave420l_c 0 +/-3125Hz
> wave420l_b 0 +/-3125Hz
> hcodec 0 +/-3125Hz
> alt_32k 0 +/-3125Hz
> gpio_msr 0 +/-3125Hz
> hevc 0 +/-3125Hz
> vid_lock 0 +/-3125Hz
> pwm_f 0 +/-3125Hz
> pwm_e 0 +/-3125Hz
> pwm_d 23984375 +/-3125Hz
> pwm_c 0 +/-3125Hz
> aoclkx2_int 0 +/-3125Hz
> aoclk_int 0 +/-3125Hz
> rng_ring_osc_0 66746875 +/-3125Hz
> rng_ring_osc_1 58442188 +/-3125Hz
> rng_ring_osc_2 52098438 +/-3125Hz
> rng_ring_osc_3 46662500 +/-3125Hz
> vapb 249996094 +/-7812Hz
> ge2d 249992188 +/-7812Hz
>
> On the AML-S905X-CC board.
>
> Neil
>
next prev parent reply other threads:[~2018-11-18 9:32 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-14 13:16 [PATCH v2 0/3] Add Amlogic Meson GX SoC Clock Measure Driver Neil Armstrong
2018-11-14 13:16 ` Neil Armstrong
2018-11-14 13:16 ` Neil Armstrong
2018-11-14 13:16 ` [PATCH v2 1/3] dt-bindings: amlogic: Add Internal Clock Measurer bindings Neil Armstrong
2018-11-14 13:16 ` Neil Armstrong
2018-11-14 13:16 ` Neil Armstrong
2018-11-17 15:52 ` Rob Herring
2018-11-17 15:52 ` Rob Herring
2018-11-17 15:52 ` Rob Herring
2018-11-17 15:52 ` Rob Herring
2018-11-17 20:32 ` Martin Blumenstingl
2018-11-17 20:32 ` Martin Blumenstingl
2018-11-17 20:32 ` Martin Blumenstingl
2018-11-14 13:16 ` [PATCH v2 2/3] soc: amlogic: Add Meson GX Clock Measure driver Neil Armstrong
2018-11-14 13:16 ` Neil Armstrong
2018-11-14 13:16 ` Neil Armstrong
2018-11-17 20:41 ` Martin Blumenstingl
2018-11-17 20:41 ` Martin Blumenstingl
2018-11-17 20:41 ` Martin Blumenstingl
2018-11-14 13:16 ` [PATCH v2 3/3] ARM64: dts: meson-gx: Add Internal Clock Measurer node Neil Armstrong
2018-11-14 13:16 ` Neil Armstrong
2018-11-14 13:16 ` Neil Armstrong
2018-11-14 13:17 ` [PATCH v2 0/3] Add Amlogic Meson GX SoC Clock Measure Driver Neil Armstrong
2018-11-14 13:17 ` Neil Armstrong
2018-11-14 13:17 ` Neil Armstrong
2018-11-18 9:32 ` Neil Armstrong [this message]
2018-11-18 9:32 ` Neil Armstrong
2018-11-18 9:32 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5BF131C3.9040808@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.