From: Chanwoo Choi <cw00.choi@samsung.com>
To: Lukasz Luba <l.luba@partner.samsung.com>,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org
Cc: tjakobi@math.uni-bielefeld.de, myungjoo.ham@samsung.com,
kyungmin.park@samsung.com, rjw@rjwysocki.net,
len.brown@intel.com, pavel@ucw.cz, gregkh@linuxfoundation.org,
keescook@chromium.org, anton@enomsg.org, ccross@android.com,
tony.luck@intel.com, robh+dt@kernel.org, mark.rutland@arm.com,
kgene@kernel.org, krzk@kernel.org, m.szyprowski@samsung.com,
b.zolnierkie@samsung.com
Subject: Re: [PATCH 6/6] arm: dts: exynos4: set opp-suspend for DMC and leftbus
Date: Thu, 22 Nov 2018 12:09:31 +0900 [thread overview]
Message-ID: <5BF61DEB.5010403@samsung.com> (raw)
In-Reply-To: <1542823301-23563-7-git-send-email-l.luba@partner.samsung.com>
Hi,
On 2018년 11월 22일 03:01, Lukasz Luba wrote:
> Mark the state for devfreq device while entring suspend/resume process.
>
> The patch draws on Tobias Jakobi's work posted ~2 years ago, who tried to
> solve issue with devfreq device's frequency during suspend/resume.
> During the discussion on LKML some corner cases and comments appeared
> related to the design. This patch address them keeping in mind suggestions
> from Chanwoo Choi.
>
> Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
> Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
> ---
> arch/arm/boot/dts/exynos4210.dtsi | 2 ++
> arch/arm/boot/dts/exynos4412.dtsi | 2 ++
> 2 files changed, 4 insertions(+)
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
> index b6091c2..4429b72 100644
> --- a/arch/arm/boot/dts/exynos4210.dtsi
> +++ b/arch/arm/boot/dts/exynos4210.dtsi
> @@ -298,6 +298,7 @@
> opp-400000000 {
> opp-hz = /bits/ 64 <400000000>;
> opp-microvolt = <1150000>;
> + opp-suspend;
> };
> };
>
> @@ -367,6 +368,7 @@
> };
> opp-200000000 {
> opp-hz = /bits/ 64 <200000000>;
> + opp-suspend;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
> index 51f72f0..908c0c4 100644
> --- a/arch/arm/boot/dts/exynos4412.dtsi
> +++ b/arch/arm/boot/dts/exynos4412.dtsi
> @@ -432,6 +432,7 @@
> opp-400000000 {
> opp-hz = /bits/ 64 <400000000>;
> opp-microvolt = <1050000>;
> + opp-suspend;
> };
> };
>
> @@ -520,6 +521,7 @@
> opp-200000000 {
> opp-hz = /bits/ 64 <200000000>;
> opp-microvolt = <1000000>;
> + opp-suspend;
> };
> };
>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
WARNING: multiple messages have this Message-ID (diff)
From: cw00.choi@samsung.com (Chanwoo Choi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] arm: dts: exynos4: set opp-suspend for DMC and leftbus
Date: Thu, 22 Nov 2018 12:09:31 +0900 [thread overview]
Message-ID: <5BF61DEB.5010403@samsung.com> (raw)
In-Reply-To: <1542823301-23563-7-git-send-email-l.luba@partner.samsung.com>
Hi,
On 2018? 11? 22? 03:01, Lukasz Luba wrote:
> Mark the state for devfreq device while entring suspend/resume process.
>
> The patch draws on Tobias Jakobi's work posted ~2 years ago, who tried to
> solve issue with devfreq device's frequency during suspend/resume.
> During the discussion on LKML some corner cases and comments appeared
> related to the design. This patch address them keeping in mind suggestions
> from Chanwoo Choi.
>
> Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
> Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
> Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
> ---
> arch/arm/boot/dts/exynos4210.dtsi | 2 ++
> arch/arm/boot/dts/exynos4412.dtsi | 2 ++
> 2 files changed, 4 insertions(+)
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
>
> diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
> index b6091c2..4429b72 100644
> --- a/arch/arm/boot/dts/exynos4210.dtsi
> +++ b/arch/arm/boot/dts/exynos4210.dtsi
> @@ -298,6 +298,7 @@
> opp-400000000 {
> opp-hz = /bits/ 64 <400000000>;
> opp-microvolt = <1150000>;
> + opp-suspend;
> };
> };
>
> @@ -367,6 +368,7 @@
> };
> opp-200000000 {
> opp-hz = /bits/ 64 <200000000>;
> + opp-suspend;
> };
> };
> };
> diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
> index 51f72f0..908c0c4 100644
> --- a/arch/arm/boot/dts/exynos4412.dtsi
> +++ b/arch/arm/boot/dts/exynos4412.dtsi
> @@ -432,6 +432,7 @@
> opp-400000000 {
> opp-hz = /bits/ 64 <400000000>;
> opp-microvolt = <1050000>;
> + opp-suspend;
> };
> };
>
> @@ -520,6 +521,7 @@
> opp-200000000 {
> opp-hz = /bits/ 64 <200000000>;
> opp-microvolt = <1000000>;
> + opp-suspend;
> };
> };
>
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
next prev parent reply other threads:[~2018-11-22 3:09 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20181121180156eucas1p225af7f4341a039264ff26f2a9ad9bb12@eucas1p2.samsung.com>
2018-11-21 18:01 ` [PATCH 0/6] devfreq: handle suspend/resume Lukasz Luba
2018-11-21 18:01 ` Lukasz Luba
2018-11-21 18:01 ` [PATCH 1/6] devfreq: add basic fileds supporting suspend functionality Lukasz Luba
2018-11-21 18:01 ` Lukasz Luba
2018-11-22 2:37 ` Chanwoo Choi
2018-11-22 2:37 ` Chanwoo Choi
2018-11-26 8:14 ` MyungJoo Ham
2018-11-26 8:14 ` MyungJoo Ham
2018-12-03 14:03 ` Lukasz Luba
2018-12-03 14:03 ` Lukasz Luba
2018-11-21 18:01 ` [PATCH 2/6] devfreq: refactor set_target frequency function Lukasz Luba
2018-11-21 18:01 ` Lukasz Luba
2018-11-22 2:52 ` Chanwoo Choi
2018-11-22 2:52 ` Chanwoo Choi
2018-11-22 2:54 ` Chanwoo Choi
2018-11-22 2:54 ` Chanwoo Choi
2018-11-22 10:40 ` Lukasz Luba
2018-11-22 10:40 ` Lukasz Luba
2018-11-22 23:45 ` Chanwoo Choi
2018-11-22 23:45 ` Chanwoo Choi
2018-11-23 9:58 ` Lukasz Luba
2018-11-23 9:58 ` Lukasz Luba
2018-11-21 18:01 ` [PATCH 3/6] devfreq: add support for suspend/resume of a devfreq device Lukasz Luba
2018-11-21 18:01 ` Lukasz Luba
2018-11-21 18:01 ` Lukasz Luba
2018-11-22 2:58 ` Chanwoo Choi
2018-11-22 2:58 ` Chanwoo Choi
2018-11-22 11:00 ` Lukasz Luba
2018-11-22 11:00 ` Lukasz Luba
2018-11-22 23:54 ` Chanwoo Choi
2018-11-22 23:54 ` Chanwoo Choi
2018-11-23 10:01 ` Lukasz Luba
2018-11-23 10:01 ` Lukasz Luba
2018-11-26 0:19 ` Chanwoo Choi
2018-11-26 0:19 ` Chanwoo Choi
2018-12-03 14:05 ` Lukasz Luba
2018-12-03 14:05 ` Lukasz Luba
2018-11-21 18:01 ` [PATCH 4/6] devfreq: add devfreq_suspend/resume() functions Lukasz Luba
2018-11-21 18:01 ` Lukasz Luba
2018-11-22 3:07 ` Chanwoo Choi
2018-11-22 3:07 ` Chanwoo Choi
2018-11-22 11:02 ` Lukasz Luba
2018-11-22 11:02 ` Lukasz Luba
2018-11-21 18:01 ` [PATCH 5/6] drivers: power: suspend: call devfreq suspend/resume Lukasz Luba
2018-11-21 18:01 ` Lukasz Luba
2018-11-22 3:08 ` Chanwoo Choi
2018-11-22 3:08 ` Chanwoo Choi
2018-11-21 18:01 ` [PATCH 6/6] arm: dts: exynos4: set opp-suspend for DMC and leftbus Lukasz Luba
2018-11-21 18:01 ` Lukasz Luba
2018-11-22 3:09 ` Chanwoo Choi [this message]
2018-11-22 3:09 ` Chanwoo Choi
2018-11-22 11:04 ` Lukasz Luba
2018-11-22 11:04 ` Lukasz Luba
2018-11-22 17:24 ` [PATCH 0/6] devfreq: handle suspend/resume Tobias Jakobi
2018-11-22 17:24 ` Tobias Jakobi
2018-11-22 17:44 ` Lukasz Luba
2018-11-22 17:44 ` Lukasz Luba
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5BF61DEB.5010403@samsung.com \
--to=cw00.choi@samsung.com \
--cc=anton@enomsg.org \
--cc=b.zolnierkie@samsung.com \
--cc=ccross@android.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=keescook@chromium.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=kyungmin.park@samsung.com \
--cc=l.luba@partner.samsung.com \
--cc=len.brown@intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=mark.rutland@arm.com \
--cc=myungjoo.ham@samsung.com \
--cc=pavel@ucw.cz \
--cc=rjw@rjwysocki.net \
--cc=robh+dt@kernel.org \
--cc=tjakobi@math.uni-bielefeld.de \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.