From: AlexChen <alex.chen@huawei.com>
To: <mjt@tls.msk.ru>, Laurent Vivier <laurent@vivier.eu>
Cc: <qemu-trivial@nongnu.org>, <qemu-devel@nongnu.org>
Subject: [PATCH 4/4] qga: Switch and case should be at the same indent
Date: Mon, 26 Oct 2020 17:05:49 +0800 [thread overview]
Message-ID: <5F96916D.1020501@huawei.com> (raw)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
---
qga/main.c | 52 ++++++++++++++++++++++++++--------------------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/qga/main.c b/qga/main.c
index 69660d9abd..33e510ba19 100644
--- a/qga/main.c
+++ b/qga/main.c
@@ -280,20 +280,20 @@ QEMU_HELP_BOTTOM "\n"
static const char *ga_log_level_str(GLogLevelFlags level)
{
switch (level & G_LOG_LEVEL_MASK) {
- case G_LOG_LEVEL_ERROR:
- return "error";
- case G_LOG_LEVEL_CRITICAL:
- return "critical";
- case G_LOG_LEVEL_WARNING:
- return "warning";
- case G_LOG_LEVEL_MESSAGE:
- return "message";
- case G_LOG_LEVEL_INFO:
- return "info";
- case G_LOG_LEVEL_DEBUG:
- return "debug";
- default:
- return "user";
+ case G_LOG_LEVEL_ERROR:
+ return "error";
+ case G_LOG_LEVEL_CRITICAL:
+ return "critical";
+ case G_LOG_LEVEL_WARNING:
+ return "warning";
+ case G_LOG_LEVEL_MESSAGE:
+ return "message";
+ case G_LOG_LEVEL_INFO:
+ return "info";
+ case G_LOG_LEVEL_DEBUG:
+ return "debug";
+ default:
+ return "user";
}
}
@@ -695,19 +695,19 @@ DWORD WINAPI service_ctrl_handler(DWORD ctrl, DWORD type, LPVOID data,
GAService *service = &ga_state->service;
switch (ctrl) {
- case SERVICE_CONTROL_STOP:
- case SERVICE_CONTROL_SHUTDOWN:
- quit_handler(SIGTERM);
- SetEvent(ga_state->wakeup_event);
- service->status.dwCurrentState = SERVICE_STOP_PENDING;
- SetServiceStatus(service->status_handle, &service->status);
- break;
- case SERVICE_CONTROL_DEVICEEVENT:
- handle_serial_device_events(type, data);
- break;
+ case SERVICE_CONTROL_STOP:
+ case SERVICE_CONTROL_SHUTDOWN:
+ quit_handler(SIGTERM);
+ SetEvent(ga_state->wakeup_event);
+ service->status.dwCurrentState = SERVICE_STOP_PENDING;
+ SetServiceStatus(service->status_handle, &service->status);
+ break;
+ case SERVICE_CONTROL_DEVICEEVENT:
+ handle_serial_device_events(type, data);
+ break;
- default:
- ret = ERROR_CALL_NOT_IMPLEMENTED;
+ default:
+ ret = ERROR_CALL_NOT_IMPLEMENTED;
}
return ret;
}
--
2.19.1
WARNING: multiple messages have this Message-ID (diff)
From: AlexChen <alex.chen@huawei.com>
To: <mjt@tls.msk.ru>, Laurent Vivier <laurent@vivier.eu>
Cc: qemu-trivial@nongnu.org, qemu-devel@nongnu.org
Subject: [PATCH 4/4] qga: Switch and case should be at the same indent
Date: Mon, 26 Oct 2020 17:05:49 +0800 [thread overview]
Message-ID: <5F96916D.1020501@huawei.com> (raw)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
---
qga/main.c | 52 ++++++++++++++++++++++++++--------------------------
1 file changed, 26 insertions(+), 26 deletions(-)
diff --git a/qga/main.c b/qga/main.c
index 69660d9abd..33e510ba19 100644
--- a/qga/main.c
+++ b/qga/main.c
@@ -280,20 +280,20 @@ QEMU_HELP_BOTTOM "\n"
static const char *ga_log_level_str(GLogLevelFlags level)
{
switch (level & G_LOG_LEVEL_MASK) {
- case G_LOG_LEVEL_ERROR:
- return "error";
- case G_LOG_LEVEL_CRITICAL:
- return "critical";
- case G_LOG_LEVEL_WARNING:
- return "warning";
- case G_LOG_LEVEL_MESSAGE:
- return "message";
- case G_LOG_LEVEL_INFO:
- return "info";
- case G_LOG_LEVEL_DEBUG:
- return "debug";
- default:
- return "user";
+ case G_LOG_LEVEL_ERROR:
+ return "error";
+ case G_LOG_LEVEL_CRITICAL:
+ return "critical";
+ case G_LOG_LEVEL_WARNING:
+ return "warning";
+ case G_LOG_LEVEL_MESSAGE:
+ return "message";
+ case G_LOG_LEVEL_INFO:
+ return "info";
+ case G_LOG_LEVEL_DEBUG:
+ return "debug";
+ default:
+ return "user";
}
}
@@ -695,19 +695,19 @@ DWORD WINAPI service_ctrl_handler(DWORD ctrl, DWORD type, LPVOID data,
GAService *service = &ga_state->service;
switch (ctrl) {
- case SERVICE_CONTROL_STOP:
- case SERVICE_CONTROL_SHUTDOWN:
- quit_handler(SIGTERM);
- SetEvent(ga_state->wakeup_event);
- service->status.dwCurrentState = SERVICE_STOP_PENDING;
- SetServiceStatus(service->status_handle, &service->status);
- break;
- case SERVICE_CONTROL_DEVICEEVENT:
- handle_serial_device_events(type, data);
- break;
+ case SERVICE_CONTROL_STOP:
+ case SERVICE_CONTROL_SHUTDOWN:
+ quit_handler(SIGTERM);
+ SetEvent(ga_state->wakeup_event);
+ service->status.dwCurrentState = SERVICE_STOP_PENDING;
+ SetServiceStatus(service->status_handle, &service->status);
+ break;
+ case SERVICE_CONTROL_DEVICEEVENT:
+ handle_serial_device_events(type, data);
+ break;
- default:
- ret = ERROR_CALL_NOT_IMPLEMENTED;
+ default:
+ ret = ERROR_CALL_NOT_IMPLEMENTED;
}
return ret;
}
--
2.19.1
next reply other threads:[~2020-10-26 13:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-26 9:05 AlexChen [this message]
2020-10-26 9:05 ` [PATCH 4/4] qga: Switch and case should be at the same indent AlexChen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5F96916D.1020501@huawei.com \
--to=alex.chen@huawei.com \
--cc=laurent@vivier.eu \
--cc=mjt@tls.msk.ru \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.