* [Xenomai] Xenomai on Arm64
@ 2017-12-17 8:29 ?? ?
2017-12-17 15:24 ` Greg Gallagher
0 siblings, 1 reply; 6+ messages in thread
From: ?? ? @ 2017-12-17 8:29 UTC (permalink / raw)
To: xenomai@xenomai.org
Hi,
I'm trying to patch Xenomai on Nvidia TX2, an Arm64 processor. When I used Xenomai 3.0.5 and ipipe-core-4.9.24-arm64-2.patch, I was not allowed config the kernel. As I understood, this is because Xenomai 3.0.5 doesn't fully support Arm64 (/kernel/cobalt/arch/arm64 is empty).
So I was wondering which versions of Xenomai and ipipe I should use? Stable release or versions under development?
Thank you!
Bocheng Yu
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai] Xenomai on Arm64
2017-12-17 8:29 [Xenomai] Xenomai on Arm64 ?? ?
@ 2017-12-17 15:24 ` Greg Gallagher
2017-12-17 16:38 ` Greg Gallagher
2017-12-17 17:22 ` 博诚 余
0 siblings, 2 replies; 6+ messages in thread
From: Greg Gallagher @ 2017-12-17 15:24 UTC (permalink / raw)
To: ?? ?, xenomai@xenomai.org
What kernel are you using L4T or mainline?
Sent from my BlackBerry - the most secure mobile device - via the Rogers Network
Original Message
From: YuBocheng@live.cn
Sent: December 17, 2017 9:44 AM
To: xenomai@xenomai.org
Subject: [Xenomai] Xenomai on Arm64
Hi,
I'm trying to patch Xenomai on Nvidia TX2, an Arm64 processor. When I used Xenomai 3.0.5 and ipipe-core-4.9.24-arm64-2.patch, I was not allowed config the kernel. As I understood, this is because Xenomai 3.0.5 doesn't fully support Arm64 (/kernel/cobalt/arch/arm64 is empty).
So I was wondering which versions of Xenomai and ipipe I should use? Stable release or versions under development?
Thank you!
Bocheng Yu
_______________________________________________
Xenomai mailing list
Xenomai@xenomai.org
https://xenomai.org/mailman/listinfo/xenomai
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai] Xenomai on Arm64
2017-12-17 15:24 ` Greg Gallagher
@ 2017-12-17 16:38 ` Greg Gallagher
2017-12-17 16:40 ` Philippe Gerum
2017-12-17 17:22 ` 博诚 余
1 sibling, 1 reply; 6+ messages in thread
From: Greg Gallagher @ 2017-12-17 16:38 UTC (permalink / raw)
To: ?? ?, xenomai@xenomai.org
I believe Arm64 is only in the next branch, but i'll leave that to someone else to confirm or correct.
Greg
Original Message
From: greg@embeddedgreg.com
Sent: December 17, 2017 10:24 AM
To: YuBocheng@live.cn; xenomai@xenomai.org
Subject: Re: [Xenomai] Xenomai on Arm64
What kernel are you using L4T or mainline?
Sent from my BlackBerry - the most secure mobile device - via the Rogers Network
Original Message
From: YuBocheng@live.cn
Sent: December 17, 2017 9:44 AM
To: xenomai@xenomai.org
Subject: [Xenomai] Xenomai on Arm64
Hi,
I'm trying to patch Xenomai on Nvidia TX2, an Arm64 processor. When I used Xenomai 3.0.5 and ipipe-core-4.9.24-arm64-2.patch, I was not allowed config the kernel. As I understood, this is because Xenomai 3.0.5 doesn't fully support Arm64 (/kernel/cobalt/arch/arm64 is empty).
So I was wondering which versions of Xenomai and ipipe I should use? Stable release or versions under development?
Thank you!
Bocheng Yu
_______________________________________________
Xenomai mailing list
Xenomai@xenomai.org
https://xenomai.org/mailman/listinfo/xenomai
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai] Xenomai on Arm64
2017-12-17 16:38 ` Greg Gallagher
@ 2017-12-17 16:40 ` Philippe Gerum
0 siblings, 0 replies; 6+ messages in thread
From: Philippe Gerum @ 2017-12-17 16:40 UTC (permalink / raw)
To: Greg Gallagher, ?? ?, xenomai@xenomai.org
On 12/17/2017 05:38 PM, Greg Gallagher wrote:
>
> I believe Arm64 is only in the next branch, but i'll leave that to someone else to confirm or correct.
That is correct.
>
> Greg
>
> Original Message
> From: greg@embeddedgreg.com
> Sent: December 17, 2017 10:24 AM
> To: YuBocheng@live.cn; xenomai@xenomai.org
> Subject: Re: [Xenomai] Xenomai on Arm64
>
> What kernel are you using L4T or mainline?
>
>
> Sent from my BlackBerry - the most secure mobile device - via the Rogers Network
>
> Original Message
> From: YuBocheng@live.cn
> Sent: December 17, 2017 9:44 AM
> To: xenomai@xenomai.org
> Subject: [Xenomai] Xenomai on Arm64
>
> Hi,
>
> I'm trying to patch Xenomai on Nvidia TX2, an Arm64 processor. When I used Xenomai 3.0.5 and ipipe-core-4.9.24-arm64-2.patch, I was not allowed config the kernel. As I understood, this is because Xenomai 3.0.5 doesn't fully support Arm64 (/kernel/cobalt/arch/arm64 is empty).
>
> So I was wondering which versions of Xenomai and ipipe I should use? Stable release or versions under development?
>
> Thank you!
>
> Bocheng Yu
> _______________________________________________
> Xenomai mailing list
> Xenomai@xenomai.org
> https://xenomai.org/mailman/listinfo/xenomai
> _______________________________________________
> Xenomai mailing list
> Xenomai@xenomai.org
> https://xenomai.org/mailman/listinfo/xenomai
>
--
Philippe.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai] Xenomai on Arm64
2017-12-17 15:24 ` Greg Gallagher
2017-12-17 16:38 ` Greg Gallagher
@ 2017-12-17 17:22 ` 博诚 余
2017-12-17 17:43 ` Greg Gallagher
1 sibling, 1 reply; 6+ messages in thread
From: 博诚 余 @ 2017-12-17 17:22 UTC (permalink / raw)
To: Greg Gallagher, xenomai@xenomai.org
Hi Greg,
I'm using L4T. The feedback from 'uname -r' is:
4.4.15-tegra
Would that be a problem?
Thank you!
Bocheng Yu
________________________________
From: Greg Gallagher <greg@embeddedgreg.com>
Sent: Sunday, December 17, 2017 10:24
To: ?? ?; xenomai@xenomai.org
Subject: Re: [Xenomai] Xenomai on Arm64
What kernel are you using L4T or mainline?
Sent from my BlackBerry - the most secure mobile device - via the Rogers Network
Original Message
From: YuBocheng@live.cn
Sent: December 17, 2017 9:44 AM
To: xenomai@xenomai.org
Subject: [Xenomai] Xenomai on Arm64
Hi,
I'm trying to patch Xenomai on Nvidia TX2, an Arm64 processor. When I used Xenomai 3.0.5 and ipipe-core-4.9.24-arm64-2.patch, I was not allowed config the kernel. As I understood, this is because Xenomai 3.0.5 doesn't fully support Arm64 (/kernel/cobalt/arch/arm64 is empty).
So I was wondering which versions of Xenomai and ipipe I should use? Stable release or versions under development?
Thank you!
Bocheng Yu
_______________________________________________
Xenomai mailing list
Xenomai@xenomai.org
https://xenomai.org/mailman/listinfo/xenomai
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [Xenomai] Xenomai on Arm64
2017-12-17 17:22 ` 博诚 余
@ 2017-12-17 17:43 ` Greg Gallagher
0 siblings, 0 replies; 6+ messages in thread
From: Greg Gallagher @ 2017-12-17 17:43 UTC (permalink / raw)
To: 博诚 余, xenomai@xenomai.org
Hi,
So the best approach here would be to try to use a patch that is
close to 4.4.15. Apply the ipipe patches and you'll have to resolve to
conflicts by hand. I'm not sure how many conflicts you'll find.
Thanks
Greg
From: yubocheng@live.cn
Sent: December 17, 2017 12:22 PM
To: greg@embeddedgreg.com; xenomai@xenomai.org
Subject: Re: [Xenomai] Xenomai on Arm64
Hi Greg,
I'm using L4T. The feedback from 'uname -r' is:
4.4.15-tegra
Would that be a problem?
Thank you!
Bocheng Yu
__________________________________________________________________
From: Greg Gallagher <[1]greg@embeddedgreg.com>
Sent: Sunday, December 17, 2017 10:24
To: ?? ?; [2]xenomai@xenomai.org
Subject: Re: [Xenomai] Xenomai on Arm64
What kernel are you using L4T or mainline?
Sent from my BlackBerry - the most secure mobile device - via the
Rogers Network
Original Message
From: [3]YuBocheng@live.cn
Sent: December 17, 2017 9:44 AM
To: [4]xenomai@xenomai.org
Subject: [Xenomai] Xenomai on Arm64
Hi,
I'm trying to patch Xenomai on Nvidia TX2, an Arm64 processor. When I
used Xenomai 3.0.5 and [5]ipipe-core-4.9.24-arm64-2.patch, I was not
allowed config the kernel. As I understood, this is because Xenomai
3.0.5 doesn't fully support Arm64 (/kernel/cobalt/arch/arm64 is empty).
So I was wondering which versions of Xenomai and ipipe I should use?
Stable release or versions under development?
Thank you!
Bocheng Yu
_______________________________________________
Xenomai mailing list
[6]Xenomai@xenomai.org
[7]https://xenomai.org/mailman/listinfo/xenomai
References
1. mailto:greg@embeddedgreg.com
2. mailto:xenomai@xenomai.org
3. mailto:YuBocheng@live.cn
4. mailto:xenomai@xenomai.org
5. http://ipipe-core-4.9.24-arm64-2.patch/
6. mailto:Xenomai@xenomai.org
7. https://xenomai.org/mailman/listinfo/xenomai
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-12-17 17:43 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-12-17 8:29 [Xenomai] Xenomai on Arm64 ?? ?
2017-12-17 15:24 ` Greg Gallagher
2017-12-17 16:38 ` Greg Gallagher
2017-12-17 16:40 ` Philippe Gerum
2017-12-17 17:22 ` 博诚 余
2017-12-17 17:43 ` Greg Gallagher
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.