From: Shaoqin Huang <shahuang@redhat.com>
To: Nikos Nikoleris <nikos.nikoleris@arm.com>,
kvm@vger.kernel.org, kvmarm@lists.linux.dev,
andrew.jones@linux.dev
Cc: pbonzini@redhat.com, alexandru.elisei@arm.com, ricarkol@google.com
Subject: Re: [PATCH v4 04/30] lib: Apply Lindent to acpi.{c,h}
Date: Thu, 9 Mar 2023 15:11:56 +0800 [thread overview]
Message-ID: <5a8887b2-a276-b087-964e-fa3f98826185@redhat.com> (raw)
In-Reply-To: <20230213101759.2577077-5-nikos.nikoleris@arm.com>
Hi Nikos,
On 2/13/23 18:17, Nikos Nikoleris wrote:
> The change was done by modifying Linux's scripts/Lindent to use 100
> columns instead of 80.
>
> Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
> ---
> lib/acpi.c | 70 ++++++++++++------------
> lib/acpi.h | 157 ++++++++++++++++++++++++++---------------------------
> 2 files changed, 111 insertions(+), 116 deletions(-)
>
> diff --git a/lib/acpi.c b/lib/acpi.c
> index de275caf..836156a1 100644
> --- a/lib/acpi.c
> +++ b/lib/acpi.c
> @@ -36,47 +36,45 @@ static struct rsdp_descriptor *get_rsdp(void)
> }
> #endif /* CONFIG_EFI */
>
> -void* find_acpi_table_addr(u32 sig)
> +void *find_acpi_table_addr(u32 sig)
> {
> - struct rsdp_descriptor *rsdp;
> - struct rsdt_descriptor_rev1 *rsdt;
> - void *end;
> - int i;
> + struct rsdp_descriptor *rsdp;
> + struct rsdt_descriptor_rev1 *rsdt;
> + void *end;
> + int i;
>
> - /* FACS is special... */
> - if (sig == FACS_SIGNATURE) {
> - struct fadt_descriptor_rev1 *fadt;
> - fadt = find_acpi_table_addr(FACP_SIGNATURE);
> - if (!fadt) {
> - return NULL;
> - }
> - return (void*)(ulong)fadt->firmware_ctrl;
> - }
> + /* FACS is special... */
> + if (sig == FACS_SIGNATURE) {
> + struct fadt_descriptor_rev1 *fadt;
> + fadt = find_acpi_table_addr(FACP_SIGNATURE);
> + if (!fadt)
> + return NULL;
>
> - rsdp = get_rsdp();
> - if (rsdp == NULL) {
> - printf("Can't find RSDP\n");
> - return 0;
> - }
> + return (void *)(ulong) fadt->firmware_ctrl;
> + }
>
> - if (sig == RSDP_SIGNATURE) {
> - return rsdp;
> - }
> + rsdp = get_rsdp();
> + if (rsdp == NULL) {
> + printf("Can't find RSDP\n");
> + return NULL;
> + }
>
> - rsdt = (void*)(ulong)rsdp->rsdt_physical_address;
> - if (!rsdt || rsdt->signature != RSDT_SIGNATURE)
> - return 0;
> + if (sig == RSDP_SIGNATURE)
> + return rsdp;
>
> - if (sig == RSDT_SIGNATURE) {
> - return rsdt;
> - }
> + rsdt = (void *)(ulong) rsdp->rsdt_physical_address;
> + if (!rsdt || rsdt->signature != RSDT_SIGNATURE)
> + return NULL;
> +
> + if (sig == RSDT_SIGNATURE)
> + return rsdt;
>
> - end = (void*)rsdt + rsdt->length;
> - for (i=0; (void*)&rsdt->table_offset_entry[i] < end; i++) {
> - struct acpi_table *t = (void*)(ulong)rsdt->table_offset_entry[i];
> - if (t && t->signature == sig) {
> - return t;
> - }
> - }
> - return NULL;
> + end = (void *)rsdt + rsdt->length;
> + for (i = 0; (void *)&rsdt->table_offset_entry[i] < end; i++) {
> + struct acpi_table *t = (void *)(ulong) rsdt->table_offset_entry[i];
> + if (t && t->signature == sig) {
> + return t;
> + }
> + }
> + return NULL;
> }
> diff --git a/lib/acpi.h b/lib/acpi.h
> index 1e89840c..b67bbe19 100644
> --- a/lib/acpi.h
> +++ b/lib/acpi.h
> @@ -3,7 +3,7 @@
>
> #include "libcflat.h"
>
> -#define ACPI_SIGNATURE(c1, c2, c3, c4) \
> +#define ACPI_SIGNATURE(c1, c2, c3, c4) \
> ((c1) | ((c2) << 8) | ((c3) << 16) | ((c4) << 24))
>
> #define RSDP_SIGNATURE ACPI_SIGNATURE('R','S','D','P')
> @@ -11,102 +11,99 @@
> #define FACP_SIGNATURE ACPI_SIGNATURE('F','A','C','P')
> #define FACS_SIGNATURE ACPI_SIGNATURE('F','A','C','S')
>
> -
> -#define ACPI_SIGNATURE_8BYTE(c1, c2, c3, c4, c5, c6, c7, c8) \
> - ((uint64_t)(ACPI_SIGNATURE(c1, c2, c3, c4))) | \
> +#define ACPI_SIGNATURE_8BYTE(c1, c2, c3, c4, c5, c6, c7, c8) \
> + ((uint64_t)(ACPI_SIGNATURE(c1, c2, c3, c4))) | \
> ((uint64_t)(ACPI_SIGNATURE(c5, c6, c7, c8)) << 32)
>
> #define RSDP_SIGNATURE_8BYTE (ACPI_SIGNATURE_8BYTE('R', 'S', 'D', ' ', 'P', 'T', 'R', ' '))
>
> -struct rsdp_descriptor { /* Root System Descriptor Pointer */
> - u64 signature; /* ACPI signature, contains "RSD PTR " */
> - u8 checksum; /* To make sum of struct == 0 */
> - u8 oem_id [6]; /* OEM identification */
> - u8 revision; /* Must be 0 for 1.0, 2 for 2.0 */
> - u32 rsdt_physical_address; /* 32-bit physical address of RSDT */
> - u32 length; /* XSDT Length in bytes including hdr */
> - u64 xsdt_physical_address; /* 64-bit physical address of XSDT */
> - u8 extended_checksum; /* Checksum of entire table */
> - u8 reserved [3]; /* Reserved field must be 0 */
> +struct rsdp_descriptor { /* Root System Descriptor Pointer */
> + u64 signature; /* ACPI signature, contains "RSD PTR " */
> + u8 checksum; /* To make sum of struct == 0 */
> + u8 oem_id[6]; /* OEM identification */
> + u8 revision; /* Must be 0 for 1.0, 2 for 2.0 */
> + u32 rsdt_physical_address; /* 32-bit physical address of RSDT */
> + u32 length; /* XSDT Length in bytes including hdr */
> + u64 xsdt_physical_address; /* 64-bit physical address of XSDT */
> + u8 extended_checksum; /* Checksum of entire table */
> + u8 reserved[3]; /* Reserved field must be 0 */
> };
>
> -#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \
> - u32 signature; /* ACPI signature (4 ASCII characters) */ \
> - u32 length; /* Length of table, in bytes, including header */ \
> - u8 revision; /* ACPI Specification minor version # */ \
> - u8 checksum; /* To make sum of entire table == 0 */ \
> - u8 oem_id [6]; /* OEM identification */ \
> - u8 oem_table_id [8]; /* OEM table identification */ \
> - u32 oem_revision; /* OEM revision number */ \
> - u8 asl_compiler_id [4]; /* ASL compiler vendor ID */ \
> - u32 asl_compiler_revision; /* ASL compiler revision number */
> +#define ACPI_TABLE_HEADER_DEF /* ACPI common table header */ \
> + u32 signature; /* ACPI signature (4 ASCII characters) */ \
> + u32 length; /* Length of table, in bytes, including header */ \
> + u8 revision; /* ACPI Specification minor version # */ \
> + u8 checksum; /* To make sum of entire table == 0 */ \
> + u8 oem_id [6]; /* OEM identification */ \
^
> + u8 oem_table_id [8]; /* OEM table identification */ \
^
> + u32 oem_revision; /* OEM revision number */ \
> + u8 asl_compiler_id [4]; /* ASL compiler vendor ID */ \
^
nit: These space should also be deleted.
Thanks,
Shaoqin
> + u32 asl_compiler_revision; /* ASL compiler revision number */
>
> struct acpi_table {
> - ACPI_TABLE_HEADER_DEF
> - char data[0];
> + ACPI_TABLE_HEADER_DEF
> + char data[0];
> };
>
> struct rsdt_descriptor_rev1 {
> - ACPI_TABLE_HEADER_DEF
> - u32 table_offset_entry[0];
> + ACPI_TABLE_HEADER_DEF
> + u32 table_offset_entry[1];
> };
>
> -struct fadt_descriptor_rev1
> -{
> - ACPI_TABLE_HEADER_DEF /* ACPI common table header */
> - u32 firmware_ctrl; /* Physical address of FACS */
> - u32 dsdt; /* Physical address of DSDT */
> - u8 model; /* System Interrupt Model */
> - u8 reserved1; /* Reserved */
> - u16 sci_int; /* System vector of SCI interrupt */
> - u32 smi_cmd; /* Port address of SMI command port */
> - u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
> - u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
> - u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */
> - u8 reserved2; /* Reserved - must be zero */
> - u32 pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */
> - u32 pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */
> - u32 pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */
> - u32 pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */
> - u32 pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */
> - u32 pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */
> - u32 gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */
> - u32 gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */
> - u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */
> - u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */
> - u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */
> - u8 pm_tmr_len; /* Byte Length of ports at pm_tm_blk */
> - u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */
> - u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */
> - u8 gpe1_base; /* Offset in gpe model where gpe1 events start */
> - u8 reserved3; /* Reserved */
> - u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */
> - u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */
> - u16 flush_size; /* Size of area read to flush caches */
> - u16 flush_stride; /* Stride used in flushing caches */
> - u8 duty_offset; /* Bit location of duty cycle field in p_cnt reg */
> - u8 duty_width; /* Bit width of duty cycle field in p_cnt reg */
> - u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */
> - u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */
> - u8 century; /* Index to century in RTC CMOS RAM */
> - u8 reserved4; /* Reserved */
> - u8 reserved4a; /* Reserved */
> - u8 reserved4b; /* Reserved */
> +struct fadt_descriptor_rev1 {
> + ACPI_TABLE_HEADER_DEF /* ACPI common table header */
> + u32 firmware_ctrl; /* Physical address of FACS */
> + u32 dsdt; /* Physical address of DSDT */
> + u8 model; /* System Interrupt Model */
> + u8 reserved1; /* Reserved */
> + u16 sci_int; /* System vector of SCI interrupt */
> + u32 smi_cmd; /* Port address of SMI command port */
> + u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
> + u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
> + u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */
> + u8 reserved2; /* Reserved - must be zero */
> + u32 pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */
> + u32 pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */
> + u32 pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */
> + u32 pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */
> + u32 pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */
> + u32 pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */
> + u32 gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */
> + u32 gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */
> + u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */
> + u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */
> + u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */
> + u8 pm_tmr_len; /* Byte Length of ports at pm_tm_blk */
> + u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */
> + u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */
> + u8 gpe1_base; /* Offset in gpe model where gpe1 events start */
> + u8 reserved3; /* Reserved */
> + u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */
> + u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */
> + u16 flush_size; /* Size of area read to flush caches */
> + u16 flush_stride; /* Stride used in flushing caches */
> + u8 duty_offset; /* Bit location of duty cycle field in p_cnt reg */
> + u8 duty_width; /* Bit width of duty cycle field in p_cnt reg */
> + u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */
> + u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */
> + u8 century; /* Index to century in RTC CMOS RAM */
> + u8 reserved4; /* Reserved */
> + u8 reserved4a; /* Reserved */
> + u8 reserved4b; /* Reserved */
> };
>
> -struct facs_descriptor_rev1
> -{
> - u32 signature; /* ACPI Signature */
> - u32 length; /* Length of structure, in bytes */
> - u32 hardware_signature; /* Hardware configuration signature */
> - u32 firmware_waking_vector; /* ACPI OS waking vector */
> - u32 global_lock; /* Global Lock */
> - u32 S4bios_f : 1; /* Indicates if S4BIOS support is present */
> - u32 reserved1 : 31; /* Must be 0 */
> - u8 reserved3 [40]; /* Reserved - must be zero */
> +struct facs_descriptor_rev1 {
> + u32 signature; /* ACPI Signature */
> + u32 length; /* Length of structure, in bytes */
> + u32 hardware_signature; /* Hardware configuration signature */
> + u32 firmware_waking_vector; /* ACPI OS waking vector */
> + u32 global_lock; /* Global Lock */
> + u32 S4bios_f:1; /* Indicates if S4BIOS support is present */
> + u32 reserved1:31; /* Must be 0 */
> + u8 reserved3[40]; /* Reserved - must be zero */
> };
>
> void set_efi_rsdp(struct rsdp_descriptor *rsdp);
> -void* find_acpi_table_addr(u32 sig);
> +void *find_acpi_table_addr(u32 sig);
>
> #endif
next prev parent reply other threads:[~2023-03-09 7:12 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-13 10:17 [PATCH v4 00/30] EFI and ACPI support for arm64 Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 01/30] lib: Move acpi header and implementation to lib Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 02/30] x86: Move x86_64-specific EFI CFLAGS to x86_64 Makefile Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 03/30] arm/Makefile.common: Compile lib/acpi.c if CONFIG_EFI=y Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 04/30] lib: Apply Lindent to acpi.{c,h} Nikos Nikoleris
2023-03-09 7:11 ` Shaoqin Huang [this message]
2023-03-21 17:32 ` Andrew Jones
2023-03-22 10:05 ` Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 05/30] lib: Fix style for acpi.{c,h} Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 06/30] lib/acpi: Convert table names to Linux style Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 07/30] x86: Avoid references to fields of ACPI tables Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 08/30] lib/acpi: Ensure all struct definition for ACPI tables are packed Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 09/30] lib/acpi: Add support for the XSDT table Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 10/30] lib/acpi: Extend the definition of the FADT table Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 11/30] devicetree: Check that fdt is not NULL in dt_available() Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 12/30] arm64: Add support for setting up the PSCI conduit through ACPI Nikos Nikoleris
2023-03-21 17:31 ` Andrew Jones
2023-02-13 10:17 ` [PATCH v4 13/30] arm64: Add support for discovering the UART " Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 14/30] arm64: Add support for timer initialization " Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 15/30] arm64: Add support for cpu " Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 16/30] arm64: Add support for gic " Nikos Nikoleris
2023-03-30 6:46 ` Shaoqin Huang
2023-02-13 10:17 ` [PATCH v4 17/30] lib/printf: Support for precision modifier in printf Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 18/30] lib/printf: Add support for printing wide strings Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 19/30] lib/efi: Add support for getting the cmdline Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 20/30] arm/arm64: Rename etext to _etext Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 21/30] lib: Avoid ms_abi for calls related to EFI on arm64 Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 22/30] arm64: Add a new type of memory type flag MR_F_RESERVED Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 23/30] arm64: Add a setup sequence for systems that boot through EFI Nikos Nikoleris
2023-04-25 7:04 ` Shaoqin Huang
2023-04-25 9:09 ` Nikos Nikoleris
2023-04-25 18:31 ` Andrew Jones
2023-02-13 10:17 ` [PATCH v4 24/30] arm64: Copy code from GNU-EFI Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 25/30] arm64: Change GNU-EFI imported code to use defined types Nikos Nikoleris
2023-03-30 6:49 ` Shaoqin Huang
2023-02-13 10:17 ` [PATCH v4 26/30] arm64: Use code from the gnu-efi when booting with EFI Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 27/30] lib: Avoid external dependency in libelf Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 28/30] arm64: Add support for efi in Makefile Nikos Nikoleris
2023-03-21 18:21 ` Andrew Jones
2023-02-13 10:17 ` [PATCH v4 29/30] lib: arm: Print test exit status Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 30/30] arm64: Add an efi/run script Nikos Nikoleris
2023-03-21 18:41 ` Andrew Jones
2023-03-22 10:02 ` Nikos Nikoleris
2023-03-22 11:24 ` Andrew Jones
2023-03-22 11:57 ` Nikos Nikoleris
2023-03-22 12:32 ` Andrew Jones
2023-03-22 19:09 ` Nikos Nikoleris
2023-03-23 17:52 ` Andrew Jones
2023-03-28 9:03 ` Alexandru Elisei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5a8887b2-a276-b087-964e-fa3f98826185@redhat.com \
--to=shahuang@redhat.com \
--cc=alexandru.elisei@arm.com \
--cc=andrew.jones@linux.dev \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=nikos.nikoleris@arm.com \
--cc=pbonzini@redhat.com \
--cc=ricarkol@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.