From: Shaoqin Huang <shahuang@redhat.com>
To: Nikos Nikoleris <nikos.nikoleris@arm.com>,
kvm@vger.kernel.org, kvmarm@lists.linux.dev,
andrew.jones@linux.dev
Cc: pbonzini@redhat.com, alexandru.elisei@arm.com, ricarkol@google.com
Subject: Re: [PATCH v4 23/30] arm64: Add a setup sequence for systems that boot through EFI
Date: Tue, 25 Apr 2023 15:04:22 +0800 [thread overview]
Message-ID: <cf161112-ba2c-0dfb-9bcd-ffd288f2ae0b@redhat.com> (raw)
In-Reply-To: <20230213101759.2577077-24-nikos.nikoleris@arm.com>
Hi Nikos,
For that DABT_EL1 error, I have some clues about how it happens. It's
mainly because this patch includes a memory overflow. I will explain in
the code body.
On 2/13/23 18:17, Nikos Nikoleris wrote:
> This change implements an alternative setup sequence for the system
> when we are booting through EFI. The memory map is discovered through
> EFI boot services and devices through ACPI.
>
> This change is based on a change initially proposed by
> Andrew Jones <drjones@redhat.com>
>
> Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
> ---
> arm/cstart.S | 1 +
> arm/cstart64.S | 1 +
> lib/arm/asm/setup.h | 8 ++
> lib/arm/setup.c | 181 +++++++++++++++++++++++++++++++++++++++++++-
> lib/linux/efi.h | 1 +
> 5 files changed, 190 insertions(+), 2 deletions(-)
>
> diff --git a/arm/cstart.S b/arm/cstart.S
> index 7036e67f..3dd71ed9 100644
> --- a/arm/cstart.S
> +++ b/arm/cstart.S
> @@ -242,6 +242,7 @@ asm_mmu_disable:
> *
> * Input r0 is the stack top, which is the exception stacks base
> */
> +.globl exceptions_init
> exceptions_init:
> mrc p15, 0, r2, c1, c0, 0 @ read SCTLR
> bic r2, #CR_V @ SCTLR.V := 0
> diff --git a/arm/cstart64.S b/arm/cstart64.S
> index e4ab7d06..223c1092 100644
> --- a/arm/cstart64.S
> +++ b/arm/cstart64.S
> @@ -265,6 +265,7 @@ asm_mmu_disable:
> * Vectors
> */
>
> +.globl exceptions_init
> exceptions_init:
> adrp x4, vector_table
> add x4, x4, :lo12:vector_table
> diff --git a/lib/arm/asm/setup.h b/lib/arm/asm/setup.h
> index 64cd379b..06069116 100644
> --- a/lib/arm/asm/setup.h
> +++ b/lib/arm/asm/setup.h
> @@ -38,4 +38,12 @@ extern unsigned int mem_region_get_flags(phys_addr_t paddr);
>
> void setup(const void *fdt, phys_addr_t freemem_start);
>
> +#ifdef CONFIG_EFI
> +
> +#include <efi.h>
> +
> +efi_status_t setup_efi(efi_bootinfo_t *efi_bootinfo);
> +
> +#endif
> +
> #endif /* _ASMARM_SETUP_H_ */
> diff --git a/lib/arm/setup.c b/lib/arm/setup.c
> index 03a4098e..cab19b1e 100644
> --- a/lib/arm/setup.c
> +++ b/lib/arm/setup.c
> @@ -33,7 +33,7 @@
> #define NR_EXTRA_MEM_REGIONS 16
> #define NR_INITIAL_MEM_REGIONS (MAX_DT_MEM_REGIONS + NR_EXTRA_MEM_REGIONS)
>
> -extern unsigned long _etext;
> +extern unsigned long _text, _etext, _data, _edata;
>
> char *initrd;
> u32 initrd_size;
> @@ -43,7 +43,10 @@ int nr_cpus;
>
> static struct mem_region __initial_mem_regions[NR_INITIAL_MEM_REGIONS + 1];
> struct mem_region *mem_regions = __initial_mem_regions;
> -phys_addr_t __phys_offset, __phys_end;
> +phys_addr_t __phys_offset = (phys_addr_t)-1, __phys_end = 0;
> +
> +extern void exceptions_init(void);
> +extern void asm_mmu_disable(void);
>
> int mpidr_to_cpu(uint64_t mpidr)
> {
> @@ -289,3 +292,177 @@ void setup(const void *fdt, phys_addr_t freemem_start)
> if (!(auxinfo.flags & AUXINFO_MMU_OFF))
> setup_vm();
> }
> +
> +#ifdef CONFIG_EFI
> +
> +#include <efi.h>
> +
> +static efi_status_t setup_rsdp(efi_bootinfo_t *efi_bootinfo)
> +{
> + efi_status_t status;
> + struct acpi_table_rsdp *rsdp;
> +
> + /*
> + * RSDP resides in an EFI_ACPI_RECLAIM_MEMORY region, which is not used
> + * by kvm-unit-tests arm64 memory allocator. So it is not necessary to
> + * copy the data structure to another memory region to prevent
> + * unintentional overwrite.
> + */
> + status = efi_get_system_config_table(ACPI_20_TABLE_GUID, (void **)&rsdp);
> + if (status != EFI_SUCCESS)
> + return status;
> +
> + set_efi_rsdp(rsdp);
> +
> + return EFI_SUCCESS;
> +}
> +
> +static efi_status_t efi_mem_init(efi_bootinfo_t *efi_bootinfo)
> +{
> + int i;
> + unsigned long free_mem_pages = 0;
> + unsigned long free_mem_start = 0;
> + struct efi_boot_memmap *map = &(efi_bootinfo->mem_map);
> + efi_memory_desc_t *buffer = *map->map;
> + efi_memory_desc_t *d = NULL;
> + phys_addr_t base, top;
> + struct mem_region *r;
> + uintptr_t text = (uintptr_t)&_text, etext = __ALIGN((uintptr_t)&_etext, 4096);
> + uintptr_t data = (uintptr_t)&_data, edata = __ALIGN((uintptr_t)&_edata, 4096);
> +
> + /*
> + * Record the largest free EFI_CONVENTIONAL_MEMORY region
> + * which will be used to set up the memory allocator, so that
> + * the memory allocator can work in the largest free
> + * continuous memory region.
> + */
> + for (i = 0, r = &mem_regions[0]; i < *(map->map_size); i += *(map->desc_size), ++r) {
At here, we can see here use the mem_regions to record the
efi_boot_memmap information, so we will iterate the efi_boot_memmap
which has (*map->map_size)/(*map->desc_size) number of the structure.
Obviously, here didn't check if the mem_regions is fulled, so when the
efi_boot_memmap is bigger than the mem_regions, the memory overflow happens.
And when memory overflow happens, Coincidentally, the mmu_idmap is just
follow the memory of the mem_regions, so this iteration will write to
mmu_idmap memory, which cause the mmu_idmap not NULL, so when the first
time the __ioremap being called, which the call trace is:
efi_main->
setup_efi->
io_init->
uart0_init_acpi->
ioremap->
__ioremap
if (mmu_enabled()) {
pgtable = current_thread_info()->pgtable;
} else {
if (!mmu_idmap)
mmu_idmap = alloc_page();
pgtable = mmu_idmap;
}
When it first arrive at here, the mmu_idmap should be NULL, and a new
mmu_idmap will be allocated, but unfortunately, the mmu_idmap has been
write to a value, so it is not NULL, so the dirty mmu_idmap will be used
as a pgtable. Which cause the DABT_EL1 error when continue build the
page table.
And the solution is very easy, just make the mem_regions bigger, for
example:
static struct mem_region __initial_mem_regions[NR_INITIAL_MEM_REGIONS + 20];
struct mem_region *mem_regions = __initial_mem_regions;
After make it bigger, the DABT_EL1 error will not happen on my machine.
Hope it works for you.
Thanks,
Shaoqin
> + d = (efi_memory_desc_t *)(&((u8 *)buffer)[i]);
> +
> + r->start = d->phys_addr;
> + r->end = d->phys_addr + d->num_pages * EFI_PAGE_SIZE;
> +
> + switch (d->type) {
> + case EFI_RESERVED_TYPE:
> + case EFI_LOADER_DATA:
> + case EFI_BOOT_SERVICES_CODE:
> + case EFI_BOOT_SERVICES_DATA:
> + case EFI_RUNTIME_SERVICES_CODE:
> + case EFI_RUNTIME_SERVICES_DATA:
> + case EFI_UNUSABLE_MEMORY:
> + case EFI_ACPI_RECLAIM_MEMORY:
> + case EFI_ACPI_MEMORY_NVS:
> + case EFI_PAL_CODE:
> + r->flags = MR_F_RESERVED;
> + break;
> + case EFI_MEMORY_MAPPED_IO:
> + case EFI_MEMORY_MAPPED_IO_PORT_SPACE:
> + r->flags = MR_F_IO;
> + break;
> + case EFI_LOADER_CODE:
> + if (r->start <= text && r->end > text) {
> + /* This is the unit test region. Flag the code separately. */
> + phys_addr_t tmp = r->end;
> +
> + assert(etext <= data);
> + assert(edata <= r->end);
> + r->flags = MR_F_CODE;
> + r->end = data;
> + ++r;
> + r->start = data;
> + r->end = tmp;
> + } else {
> + r->flags = MR_F_RESERVED;
> + }
> + break;
> + case EFI_CONVENTIONAL_MEMORY:
> + if (free_mem_pages < d->num_pages) {
> + free_mem_pages = d->num_pages;
> + free_mem_start = d->phys_addr;
> + }
> + break;
> + }
> +
> + if (!(r->flags & MR_F_IO)) {
> + if (r->start < __phys_offset)
> + __phys_offset = r->start;
> + if (r->end > __phys_end)
> + __phys_end = r->end;
> + }
> + }
> + __phys_end &= PHYS_MASK;
> + asm_mmu_disable();
> +
> + if (free_mem_pages == 0)
> + return EFI_OUT_OF_RESOURCES;
> +
> + assert(sizeof(long) == 8 || free_mem_start < (3ul << 30));
> +
> + phys_alloc_init(free_mem_start, free_mem_pages << EFI_PAGE_SHIFT);
> + phys_alloc_set_minimum_alignment(SMP_CACHE_BYTES);
> +
> + phys_alloc_get_unused(&base, &top);
> + base = PAGE_ALIGN(base);
> + top = top & PAGE_MASK;
> + assert(sizeof(long) == 8 || !(base >> 32));
> + if (sizeof(long) != 8 && (top >> 32) != 0)
> + top = ((uint64_t)1 << 32);
> + page_alloc_init_area(0, base >> PAGE_SHIFT, top >> PAGE_SHIFT);
> + page_alloc_ops_enable();
> +
> + return EFI_SUCCESS;
> +}
> +
> +efi_status_t setup_efi(efi_bootinfo_t *efi_bootinfo)
> +{
> + efi_status_t status;
> +
> + struct thread_info *ti = current_thread_info();
> +
> + memset(ti, 0, sizeof(*ti));
> +
> + exceptions_init();
> +
> + status = efi_mem_init(efi_bootinfo);
> + if (status != EFI_SUCCESS) {
> + printf("Failed to initialize memory: ");
> + switch (status) {
> + case EFI_OUT_OF_RESOURCES:
> + printf("No free memory region\n");
> + break;
> + default:
> + printf("Unknown error\n");
> + break;
> + }
> + return status;
> + }
> +
> + status = setup_rsdp(efi_bootinfo);
> + if (status != EFI_SUCCESS) {
> + printf("Cannot find RSDP in EFI system table\n");
> + return status;
> + }
> +
> + psci_set_conduit();
> + cpu_init();
> + /* cpu_init must be called before thread_info_init */
> + thread_info_init(current_thread_info(), 0);
> + /* mem_init must be called before io_init */
> + io_init();
> +
> + timer_save_state();
> + if (initrd) {
> + /* environ is currently the only file in the initrd */
> + char *env = malloc(initrd_size);
> +
> + memcpy(env, initrd, initrd_size);
> + setup_env(env, initrd_size);
> + }
> +
> + if (!(auxinfo.flags & AUXINFO_MMU_OFF))
> + setup_vm();
> +
> + return EFI_SUCCESS;
> +}
> +
> +#endif
> diff --git a/lib/linux/efi.h b/lib/linux/efi.h
> index 53748dd4..89f9a9e0 100644
> --- a/lib/linux/efi.h
> +++ b/lib/linux/efi.h
> @@ -63,6 +63,7 @@ typedef guid_t efi_guid_t;
> (c) & 0xff, ((c) >> 8) & 0xff, d } }
>
> #define ACPI_TABLE_GUID EFI_GUID(0xeb9d2d30, 0x2d88, 0x11d3, 0x9a, 0x16, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d)
> +#define ACPI_20_TABLE_GUID EFI_GUID(0x8868e871, 0xe4f1, 0x11d3, 0xbc, 0x22, 0x00, 0x80, 0xc7, 0x3c, 0x88, 0x81)
>
> #define LOADED_IMAGE_PROTOCOL_GUID EFI_GUID(0x5b1b31a1, 0x9562, 0x11d2, 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b)
>
--
Shaoqin
next prev parent reply other threads:[~2023-04-25 7:04 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-13 10:17 [PATCH v4 00/30] EFI and ACPI support for arm64 Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 01/30] lib: Move acpi header and implementation to lib Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 02/30] x86: Move x86_64-specific EFI CFLAGS to x86_64 Makefile Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 03/30] arm/Makefile.common: Compile lib/acpi.c if CONFIG_EFI=y Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 04/30] lib: Apply Lindent to acpi.{c,h} Nikos Nikoleris
2023-03-09 7:11 ` Shaoqin Huang
2023-03-21 17:32 ` Andrew Jones
2023-03-22 10:05 ` Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 05/30] lib: Fix style for acpi.{c,h} Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 06/30] lib/acpi: Convert table names to Linux style Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 07/30] x86: Avoid references to fields of ACPI tables Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 08/30] lib/acpi: Ensure all struct definition for ACPI tables are packed Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 09/30] lib/acpi: Add support for the XSDT table Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 10/30] lib/acpi: Extend the definition of the FADT table Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 11/30] devicetree: Check that fdt is not NULL in dt_available() Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 12/30] arm64: Add support for setting up the PSCI conduit through ACPI Nikos Nikoleris
2023-03-21 17:31 ` Andrew Jones
2023-02-13 10:17 ` [PATCH v4 13/30] arm64: Add support for discovering the UART " Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 14/30] arm64: Add support for timer initialization " Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 15/30] arm64: Add support for cpu " Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 16/30] arm64: Add support for gic " Nikos Nikoleris
2023-03-30 6:46 ` Shaoqin Huang
2023-02-13 10:17 ` [PATCH v4 17/30] lib/printf: Support for precision modifier in printf Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 18/30] lib/printf: Add support for printing wide strings Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 19/30] lib/efi: Add support for getting the cmdline Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 20/30] arm/arm64: Rename etext to _etext Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 21/30] lib: Avoid ms_abi for calls related to EFI on arm64 Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 22/30] arm64: Add a new type of memory type flag MR_F_RESERVED Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 23/30] arm64: Add a setup sequence for systems that boot through EFI Nikos Nikoleris
2023-04-25 7:04 ` Shaoqin Huang [this message]
2023-04-25 9:09 ` Nikos Nikoleris
2023-04-25 18:31 ` Andrew Jones
2023-02-13 10:17 ` [PATCH v4 24/30] arm64: Copy code from GNU-EFI Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 25/30] arm64: Change GNU-EFI imported code to use defined types Nikos Nikoleris
2023-03-30 6:49 ` Shaoqin Huang
2023-02-13 10:17 ` [PATCH v4 26/30] arm64: Use code from the gnu-efi when booting with EFI Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 27/30] lib: Avoid external dependency in libelf Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 28/30] arm64: Add support for efi in Makefile Nikos Nikoleris
2023-03-21 18:21 ` Andrew Jones
2023-02-13 10:17 ` [PATCH v4 29/30] lib: arm: Print test exit status Nikos Nikoleris
2023-02-13 10:17 ` [PATCH v4 30/30] arm64: Add an efi/run script Nikos Nikoleris
2023-03-21 18:41 ` Andrew Jones
2023-03-22 10:02 ` Nikos Nikoleris
2023-03-22 11:24 ` Andrew Jones
2023-03-22 11:57 ` Nikos Nikoleris
2023-03-22 12:32 ` Andrew Jones
2023-03-22 19:09 ` Nikos Nikoleris
2023-03-23 17:52 ` Andrew Jones
2023-03-28 9:03 ` Alexandru Elisei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cf161112-ba2c-0dfb-9bcd-ffd288f2ae0b@redhat.com \
--to=shahuang@redhat.com \
--cc=alexandru.elisei@arm.com \
--cc=andrew.jones@linux.dev \
--cc=kvm@vger.kernel.org \
--cc=kvmarm@lists.linux.dev \
--cc=nikos.nikoleris@arm.com \
--cc=pbonzini@redhat.com \
--cc=ricarkol@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.