Instruction Cache Parity Error / 2.6.10 on MPC8540

Instruction Cache Parity Error / 2.6.10 on MPC8540

[Clemens Koller]

Hello,

Well, I made good progress with Kernel 2.6.10 on my target (PM854, 
Microsys) which is very similar to the MPC8540_ads configuration.
But now, after working for several minutes, I ran into the following
Oops:

-----8<-------------------------------------------------------------
root@PM854:~/openssh-3.9p1$ Machine check in kernel mode.
Caused by (from MCSR=40000000): Instruction Cache Parity Error
Oops: machine check, sig: 7 [#1]
PREEMPT
NIP: C00054F8 LR: C01F8348 SP: C0263E70 REGS: c0232f50 TRAP: 0202    Not 
tainted
MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
TASK = c0233720[0] 'swapper' THREAD: c0262000
Last syscall: 120
GPR00: C01F8348 C0263E70 C0233720 C0233720 C054C400 00000000 00000351 
00000000
GPR08: 00000000 00000003 C054C400 0000473A 0000AE53 00000000 10000700 
007FFF93
GPR16: 00000000 00000001 007FFF00 C02B0000 C02C0000 C0233884 3B9ACA00 
C02B5C78
GPR24: 000000F4 C02B5C78 C0233720 C054C400 C02AED00 00000000 00000000 
C0263E90
NIP [c00054f8] __switch_to+0x14/0x9c
LR [c01f8348] schedule+0x318/0x704
Call trace:
  [c01f8348] schedule+0x318/0x704
  [c00026c8] resume_kernel+0x38/0x5c
  [c00039f8] cpu_idle+0x28/0x40
  [c0001afc] rest_init+0x28/0x38
  [c0264804] start_kernel+0x16c/0x1a4
  [c0000364] skpinv+0x294/0x2d0
Kernel panic - not syncing: Attempted to kill the idle task!
  <0>Rebooting in 180 seconds..
-----8<-------------------------------------------------------------

Does this look familiar to anybody? Any ideas where to start
debugging?

Best greets,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19

Re: Instruction Cache Parity Error / 2.6.10 on MPC8540

[Kumar Gala]

Clemens,

I dont think there is really and debug to do with this.  If this is=20
happening consistently it suppose to be an faulty part.  What rev of=20
the silicon do you have (PVR, SVR)?

- kumar

On Jan 20, 2005, at 5:24 AM, Clemens Koller wrote:

> Hello,
>
> Well, I made good progress with Kernel 2.6.10 on my target (PM854,
>  Microsys) which is very similar to the MPC8540_ads configuration.
>  But now, after working for several minutes, I ran into the following
>  Oops:
>
> -----8<-------------------------------------------------------------
>  root@PM854:~/openssh-3.9p1$ Machine check in kernel mode.
>  Caused by (from MCSR=3D40000000): Instruction Cache Parity Error
>  Oops: machine check, sig: 7 [#1]
>  PREEMPT
>  NIP: C00054F8 LR: C01F8348 SP: C0263E70 REGS: c0232f50 TRAP: 0202=A0=A0=
=A0=20
> Not
> tainted
>  MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
>  TASK =3D c0233720[0] 'swapper' THREAD: c0262000
>  Last syscall: 120
>  GPR00: C01F8348 C0263E70 C0233720 C0233720 C054C400 00000000 00000351
> 00000000
>  GPR08: 00000000 00000003 C054C400 0000473A 0000AE53 00000000 10000700
> 007FFF93
>  GPR16: 00000000 00000001 007FFF00 C02B0000 C02C0000 C0233884 3B9ACA00
> C02B5C78
>  GPR24: 000000F4 C02B5C78 C0233720 C054C400 C02AED00 00000000 00000000
> C0263E90
>  NIP [c00054f8] __switch_to+0x14/0x9c
> LR [c01f8348] schedule+0x318/0x704
> Call trace:
>  =A0 [c01f8348] schedule+0x318/0x704
> =A0 [c00026c8] resume_kernel+0x38/0x5c
> =A0 [c00039f8] cpu_idle+0x28/0x40
> =A0 [c0001afc] rest_init+0x28/0x38
> =A0 [c0264804] start_kernel+0x16c/0x1a4
> =A0 [c0000364] skpinv+0x294/0x2d0
> Kernel panic - not syncing: Attempted to kill the idle task!
>  =A0 <0>Rebooting in 180 seconds..
>  -----8<-------------------------------------------------------------
>
> Does this look familiar to anybody? Any ideas where to start
>  debugging?
>
> Best greets,
>
> Clemens Koller
> _______________________________
> R&D Imaging Devices
>  Anagramm GmbH
>  Rupert-Mayer-Str. 45/1
>  81379 Muenchen
>  Germany
>
> http://www.anagramm.de
> Phone: +49-89-741518-50
>  Fax: +49-89-741518-19
>  _______________________________________________
> Linuxppc-embedded mailing list
>  Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded

Re: Instruction Cache Parity Error / 2.6.10 on MPC8540

[Clemens Koller]

Hello, Kumar!

Thank you again for your help...

The inscription of the CPU says:
PPC8540 PX833LB
2L71V MSIA
QEAD0412
(Yes, there is a heatsink on it ;-)

root@PM854:/cdrom/crux/base$ cat /proc/cpuinfo
processor       : 0
cpu             : e500
revision        : 2.0 (pvr 8020 0020)
bogomips        : 823.29
Vendor          : Freescale Semiconductor
Machine         : mpc8540ads
clock           : 825MHz
PVR             : 0x80200020
SVR             : 0x80300020
PLL setting     : 0x5
Memory          : 256 MB

I hope that this is current...
Where can I find more information about the SVR?
(I had a look to the Errata Sheets... but there is no
overview of the different silicons.)

Up to now, the Panic didn't appear again - I didn't
change anything yet...
I just try to setup a new system (CRUX) on the attached hdd.

Best greets,

Clemens Koller
_______________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Str. 45/1
81379 Muenchen
Germany

http://www.anagramm.de
Phone: +49-89-741518-50
Fax: +49-89-741518-19

Kumar Gala wrote:
> Clemens,
> 
> I dont think there is really and debug to do with this.  If this is 
> happening consistently it suppose to be an faulty part.  What rev of the 
> silicon do you have (PVR, SVR)?
> 
> - kumar
> 
> On Jan 20, 2005, at 5:24 AM, Clemens Koller wrote:
> 
>> Hello,
>>
>> Well, I made good progress with Kernel 2.6.10 on my target (PM854,
>>  Microsys) which is very similar to the MPC8540_ads configuration.
>>  But now, after working for several minutes, I ran into the following
>>  Oops:
>>
>> -----8<-------------------------------------------------------------
>>  root@PM854:~/openssh-3.9p1$ Machine check in kernel mode.
>>  Caused by (from MCSR=40000000): Instruction Cache Parity Error
>>  Oops: machine check, sig: 7 [#1]
>>  PREEMPT
>>  NIP: C00054F8 LR: C01F8348 SP: C0263E70 REGS: c0232f50 TRAP: 0202    Not
>> tainted
>>  MSR: 00021000 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 00
>>  TASK = c0233720[0] 'swapper' THREAD: c0262000
>>  Last syscall: 120
>>  GPR00: C01F8348 C0263E70 C0233720 C0233720 C054C400 00000000 00000351
>> 00000000
>>  GPR08: 00000000 00000003 C054C400 0000473A 0000AE53 00000000 10000700
>> 007FFF93
>>  GPR16: 00000000 00000001 007FFF00 C02B0000 C02C0000 C0233884 3B9ACA00
>> C02B5C78
>>  GPR24: 000000F4 C02B5C78 C0233720 C054C400 C02AED00 00000000 00000000
>> C0263E90
>>  NIP [c00054f8] __switch_to+0x14/0x9c
>> LR [c01f8348] schedule+0x318/0x704
>> Call trace:
>>    [c01f8348] schedule+0x318/0x704
>>   [c00026c8] resume_kernel+0x38/0x5c
>>   [c00039f8] cpu_idle+0x28/0x40
>>   [c0001afc] rest_init+0x28/0x38
>>   [c0264804] start_kernel+0x16c/0x1a4
>>   [c0000364] skpinv+0x294/0x2d0
>> Kernel panic - not syncing: Attempted to kill the idle task!
>>    <0>Rebooting in 180 seconds..
>>  -----8<-------------------------------------------------------------
>>
>> Does this look familiar to anybody? Any ideas where to start
>>  debugging?
>>
>> Best greets,
>>
>> Clemens Koller
>> _______________________________
>> R&D Imaging Devices
>>  Anagramm GmbH
>>  Rupert-Mayer-Str. 45/1
>>  81379 Muenchen
>>  Germany
>>
>> http://www.anagramm.de
>> Phone: +49-89-741518-50
>>  Fax: +49-89-741518-19
>>  _______________________________________________
>> Linuxppc-embedded mailing list
>>  Linuxppc-embedded@ozlabs.org
>> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> 
> 
>