From: "xuyang2018.jy@fujitsu.com" <xuyang2018.jy@fujitsu.com>
To: Cyril Hrubis <chrubis@suse.cz>
Cc: "ltp@lists.linux.it" <ltp@lists.linux.it>
Subject: Re: [LTP] [PATCH v2 03/13] syscalls/quotactl04: Remove useless mount option
Date: Tue, 9 Nov 2021 08:14:36 +0000 [thread overview]
Message-ID: <618A2DF4.4040700@fujitsu.com> (raw)
In-Reply-To: <YYlE7jrR6nSeu0x1@yuki>
Hi Cyril
> Hi!
>> Adjust header position.
>>
>> [1]https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7c319d3
>
> So this went in to Linux 3.5 looking at supported versions ofSLES and
>RHEL it looks that anything older went out of support, so it's likely
> that we do not care anymore.
>
> Or does anyone still needs to test quota on kernels older than 3.5?
From my side, I don't test such old kernel.
I list this kernel commit, just want to said the quota mount option is
no need.
>
>
>> Signed-off-by: Yang Xu<xuyang2018.jy@fujitsu.com>
>> ---
>> .../kernel/syscalls/quotactl/quotactl04.c | 41 ++++++++-----------
>> 1 file changed, 17 insertions(+), 24 deletions(-)
>>
>> diff --git a/testcases/kernel/syscalls/quotactl/quotactl04.c b/testcases/kernel/syscalls/quotactl/quotactl04.c
>> index fd3afc888..f34050716 100644
>> --- a/testcases/kernel/syscalls/quotactl/quotactl04.c
>> +++ b/testcases/kernel/syscalls/quotactl/quotactl04.c
>> @@ -1,24 +1,22 @@
>> // SPDX-License-Identifier: GPL-2.0-or-later
>> /*
>> - * Copyright (c) 2019 FUJITSU LIMITED. All rights reserved.
>> - * Author: Yang Xu<xuyang2018.jy@cn.fujitsu.com>
>> + * Copyright (c) 2019-2021 FUJITSU LIMITED. All rights reserved.
>> + * Author: Yang Xu<xuyang2018.jy@fujitsu.com>
>> + */
>> +
>> +/*\
>> + * [Description]
>> *
>> - * This testcase checks the basic flag of quotactl(2) for project quota on
>> - * non-XFS filesystems.
>> + * This testcases checks that quotactl(2) on ext4 filesystem succeeds to:
>> *
>> - * 1) quotactl(2) succeeds to turn on quota with Q_QUOTAON flag for project.
>> - * 2) quotactl(2) succeeds to set disk quota limits with Q_SETQUOTA flag
>> - * for project.
>> - * 3) quotactl(2) succeeds to get disk quota limits with Q_GETQUOTA flag
>> - * for project.
>> - * 4) quotactl(2) succeeds to set information about quotafile with Q_SETINFO
>> - * flag for project.
>> - * 5) quotactl(2) succeeds to get information about quotafile with Q_GETINFO
>> - * flag for project.
>> - * 6) quotactl(2) succeeds to get quota format with Q_GETFMT flag for project.
>> - * 7) quotactl(2) succeeds to get disk quota limit greater than or equal to
>> - * ID with Q_GETNEXTQUOTA flag for project.
>> - * 8) quotactl(2) succeeds to turn off quota with Q_QUOTAOFF flag for project.
>> + * - turn on quota with Q_QUOTAON flag for project
>> + * - set disk quota limits with Q_SETQUOTA flag for project
>> + * - get disk quota limits with Q_GETQUOTA flag for project
>> + * - set information about quotafile with Q_SETINFO flag for project
>> + * - get information about quotafile with Q_GETINFO flag for project
>> + * - get quota format with Q_GETFMT flag for project
>> + * - get disk quota limit greater than or equal to ID with Q_GETNEXTQUOTA flag for project
>> + * - turn off quota with Q_QUOTAOFF flag for project
>> *
>> * Minimum e2fsprogs version required is 1.43.
>> */
>
> It would be cleaner to separate the change to the description from the
> possibly functional change that removes the mount option. It would be
> much easier to revert the functional change in the very unlikely case
> that we ever need it.
Ok. I will move this change to the next patch.
>
>> @@ -29,14 +27,9 @@
>> #include<stdio.h>
>> #include<sys/stat.h>
>> #include<sys/mount.h>
>> -#include "config.h"
>> -#include "lapi/quotactl.h"
>> #include "tst_safe_stdio.h"
>> #include "tst_test.h"
>> -
>> -#ifndef QFMT_VFS_V1
>> -# define QFMT_VFS_V1 4
>> -#endif
>> +#include "lapi/quotactl.h"
>>
>> #define FMTID QFMT_VFS_V1
>> #define MNTPOINT "mntpoint"
>> @@ -141,7 +134,7 @@ static void setup(void)
>> tst_brk(TCONF, "Test needs mkfs.ext4>= 1.43 for quota,project option, test skipped");
>> pclose(f);
>> SAFE_MKFS(tst_device->dev, tst_device->fs_type, fs_opts, NULL);
>> - do_mount(tst_device->dev, MNTPOINT, tst_device->fs_type, 0, "quota");
>> + do_mount(tst_device->dev, MNTPOINT, tst_device->fs_type, 0, NULL);
>> }
>>
>> static void cleanup(void)
>> --
>> 2.23.0
>>
>>
>> --
>> Mailing list info: https://lists.linux.it/listinfo/ltp
>
--
Mailing list info: https://lists.linux.it/listinfo/ltp
next prev parent reply other threads:[~2021-11-09 8:14 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-10-27 12:25 [LTP] [PATCH v2 01/13] syscalls/quotactl01: Also test with vfsv1 format Yang Xu
2021-10-27 12:25 ` [LTP] [PATCH v2 02/13] syscalls/quotactl06: " Yang Xu
2021-11-08 15:29 ` Cyril Hrubis
2021-11-09 6:59 ` xuyang2018.jy
2021-10-27 12:25 ` [LTP] [PATCH v2 03/13] syscalls/quotactl04: Remove useless mount option Yang Xu
2021-11-08 15:40 ` Cyril Hrubis
2021-11-09 8:14 ` xuyang2018.jy [this message]
2021-10-27 12:26 ` [LTP] [PATCH v2 04/13] syscalls/quotactl:Add docparse formatting Yang Xu
2021-11-08 16:08 ` Cyril Hrubis
2021-10-27 12:26 ` [LTP] [PATCH v2 05/13] lapi/syscalls: Add syscall number for quotactl_fd Yang Xu
2021-11-08 16:09 ` Cyril Hrubis
2021-11-08 3:27 ` [LTP] [PATCH v2 01/13] syscalls/quotactl01: Also test with vfsv1 format xuyang2018.jy
2021-11-08 15:25 ` Cyril Hrubis
2021-11-09 5:13 ` xuyang2018.jy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=618A2DF4.4040700@fujitsu.com \
--to=xuyang2018.jy@fujitsu.com \
--cc=chrubis@suse.cz \
--cc=ltp@lists.linux.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.