From: Peter Wu <lekensteyn@gmail.com>
To: Anthony Liguori <anthony@codemonkey.ws>
Cc: qemu-trivial@nongnu.org, qemu-devel@nongnu.org
Subject: Re: [Qemu-trivial] [Qemu-devel] [PATCH] Unbreak -no-quit for GTK when SDL is disabled
Date: Tue, 11 Jun 2013 10:53:37 +0200 [thread overview]
Message-ID: <6223452.CkX1vrxQoH@al> (raw)
In-Reply-To: <871u894oql.fsf@codemonkey.ws>
On Monday 10 June 2013 16:53:06 Anthony Liguori wrote:
> Peter Wu <lekensteyn@gmail.com> writes:
> > When QEMU is built without SDL support, -no-quit would print an error
> > message that SDL is disabled. Since GTK also supports -no-quit, enable
> > the option when GTK or SDL is enabled at compile time.
> >
> > While at it, do not create the no_quit variable when it is not used.
> >
> > Signed-off-by: Peter Wu <lekensteyn@gmail.com>
>
> Any harm in just making -no-quit unconditional?
No harm, there are just 4 bytes more memory wasted and some code, not a big
deal.
> It's a nop for VNC and presumably for spice too but it's not incorrect
> AFAICT.
>
> Would be nice to drop #ifdefs if we can.
The readability should increase by dropping it. By the way, this integer
should really be a bool.
As shortly discussed on IRC, a better approach is testing for the sanity of
certain usages instead of ifdef'ing stuff. Having SDL compiled in and then
using VNC still does not make -alt-grab more valid.
Let's drop this patch, I will submit a new one which checks the option at run-
time.
Regards,
Peter
> Regards,
>
> Anthony Liguori
>
> > ---
> >
> > include/sysemu/sysemu.h | 2 ++
> > vl.c | 13 +++++++++----
> > 2 files changed, 11 insertions(+), 4 deletions(-)
> >
> > diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> > index 2fb71af..b9b8e52 100644
> > --- a/include/sysemu/sysemu.h
> > +++ b/include/sysemu/sysemu.h
> > @@ -117,7 +117,9 @@ extern int smp_cpus;
> >
> > extern int max_cpus;
> > extern int cursor_hide;
> > extern int graphic_rotate;
> >
> > +#if defined(CONFIG_SDL) || defined(CONFIG_GTK)
> >
> > extern int no_quit;
> >
> > +#endif
> >
> > extern int no_shutdown;
> > extern int semihosting_enabled;
> > extern int old_param;
> >
> > diff --git a/vl.c b/vl.c
> > index cfd2d3e..74ab050 100644
> > --- a/vl.c
> > +++ b/vl.c
> > @@ -202,7 +202,9 @@ static int full_screen = 0;
> >
> > #ifdef CONFIG_SDL
> > static int no_frame = 0;
> > #endif
> >
> > +#if defined(CONFIG_SDL) || defined(CONFIG_GTK)
> >
> > int no_quit = 0;
> >
> > +#endif
> >
> > CharDriverState *serial_hds[MAX_SERIAL_PORTS];
> > CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
> > CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES];
> >
> > @@ -3523,6 +3525,13 @@ int main(int argc, char **argv, char **envp)
> >
> > case QEMU_OPTION_full_screen:
> > full_screen = 1;
> > break;
> >
> > + case QEMU_OPTION_no_quit:
> > +#if defined(CONFIG_SDL) || defined(CONFIG_GTK)
> > + no_quit = 1;
> > +#else
> > + fprintf(stderr, "SDL and GTK support are disabled\n");
> > +#endif
> > + break;
> >
> > #ifdef CONFIG_SDL
> >
> > case QEMU_OPTION_no_frame:
> > no_frame = 1;
> >
> > @@ -3533,9 +3542,6 @@ int main(int argc, char **argv, char **envp)
> >
> > case QEMU_OPTION_ctrl_grab:
> > ctrl_grab = 1;
> > break;
> >
> > - case QEMU_OPTION_no_quit:
> > - no_quit = 1;
> > - break;
> >
> > case QEMU_OPTION_sdl:
> > display_type = DT_SDL;
> > break;
> >
> > @@ -3543,7 +3549,6 @@ int main(int argc, char **argv, char **envp)
> >
> > case QEMU_OPTION_no_frame:
> > case QEMU_OPTION_alt_grab:
> >
> > case QEMU_OPTION_ctrl_grab:
> > - case QEMU_OPTION_no_quit:
> > case QEMU_OPTION_sdl:
> > fprintf(stderr, "SDL support is disabled\n");
> > exit(1);
WARNING: multiple messages have this Message-ID (diff)
From: Peter Wu <lekensteyn@gmail.com>
To: Anthony Liguori <anthony@codemonkey.ws>
Cc: qemu-trivial@nongnu.org, qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH] Unbreak -no-quit for GTK when SDL is disabled
Date: Tue, 11 Jun 2013 10:53:37 +0200 [thread overview]
Message-ID: <6223452.CkX1vrxQoH@al> (raw)
In-Reply-To: <871u894oql.fsf@codemonkey.ws>
On Monday 10 June 2013 16:53:06 Anthony Liguori wrote:
> Peter Wu <lekensteyn@gmail.com> writes:
> > When QEMU is built without SDL support, -no-quit would print an error
> > message that SDL is disabled. Since GTK also supports -no-quit, enable
> > the option when GTK or SDL is enabled at compile time.
> >
> > While at it, do not create the no_quit variable when it is not used.
> >
> > Signed-off-by: Peter Wu <lekensteyn@gmail.com>
>
> Any harm in just making -no-quit unconditional?
No harm, there are just 4 bytes more memory wasted and some code, not a big
deal.
> It's a nop for VNC and presumably for spice too but it's not incorrect
> AFAICT.
>
> Would be nice to drop #ifdefs if we can.
The readability should increase by dropping it. By the way, this integer
should really be a bool.
As shortly discussed on IRC, a better approach is testing for the sanity of
certain usages instead of ifdef'ing stuff. Having SDL compiled in and then
using VNC still does not make -alt-grab more valid.
Let's drop this patch, I will submit a new one which checks the option at run-
time.
Regards,
Peter
> Regards,
>
> Anthony Liguori
>
> > ---
> >
> > include/sysemu/sysemu.h | 2 ++
> > vl.c | 13 +++++++++----
> > 2 files changed, 11 insertions(+), 4 deletions(-)
> >
> > diff --git a/include/sysemu/sysemu.h b/include/sysemu/sysemu.h
> > index 2fb71af..b9b8e52 100644
> > --- a/include/sysemu/sysemu.h
> > +++ b/include/sysemu/sysemu.h
> > @@ -117,7 +117,9 @@ extern int smp_cpus;
> >
> > extern int max_cpus;
> > extern int cursor_hide;
> > extern int graphic_rotate;
> >
> > +#if defined(CONFIG_SDL) || defined(CONFIG_GTK)
> >
> > extern int no_quit;
> >
> > +#endif
> >
> > extern int no_shutdown;
> > extern int semihosting_enabled;
> > extern int old_param;
> >
> > diff --git a/vl.c b/vl.c
> > index cfd2d3e..74ab050 100644
> > --- a/vl.c
> > +++ b/vl.c
> > @@ -202,7 +202,9 @@ static int full_screen = 0;
> >
> > #ifdef CONFIG_SDL
> > static int no_frame = 0;
> > #endif
> >
> > +#if defined(CONFIG_SDL) || defined(CONFIG_GTK)
> >
> > int no_quit = 0;
> >
> > +#endif
> >
> > CharDriverState *serial_hds[MAX_SERIAL_PORTS];
> > CharDriverState *parallel_hds[MAX_PARALLEL_PORTS];
> > CharDriverState *virtcon_hds[MAX_VIRTIO_CONSOLES];
> >
> > @@ -3523,6 +3525,13 @@ int main(int argc, char **argv, char **envp)
> >
> > case QEMU_OPTION_full_screen:
> > full_screen = 1;
> > break;
> >
> > + case QEMU_OPTION_no_quit:
> > +#if defined(CONFIG_SDL) || defined(CONFIG_GTK)
> > + no_quit = 1;
> > +#else
> > + fprintf(stderr, "SDL and GTK support are disabled\n");
> > +#endif
> > + break;
> >
> > #ifdef CONFIG_SDL
> >
> > case QEMU_OPTION_no_frame:
> > no_frame = 1;
> >
> > @@ -3533,9 +3542,6 @@ int main(int argc, char **argv, char **envp)
> >
> > case QEMU_OPTION_ctrl_grab:
> > ctrl_grab = 1;
> > break;
> >
> > - case QEMU_OPTION_no_quit:
> > - no_quit = 1;
> > - break;
> >
> > case QEMU_OPTION_sdl:
> > display_type = DT_SDL;
> > break;
> >
> > @@ -3543,7 +3549,6 @@ int main(int argc, char **argv, char **envp)
> >
> > case QEMU_OPTION_no_frame:
> > case QEMU_OPTION_alt_grab:
> >
> > case QEMU_OPTION_ctrl_grab:
> > - case QEMU_OPTION_no_quit:
> > case QEMU_OPTION_sdl:
> > fprintf(stderr, "SDL support is disabled\n");
> > exit(1);
next prev parent reply other threads:[~2013-06-11 8:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-10 21:34 [Qemu-trivial] [PATCH] Unbreak -no-quit for GTK when SDL is disabled Peter Wu
2013-06-10 21:34 ` [Qemu-devel] " Peter Wu
2013-06-10 21:53 ` [Qemu-trivial] " Anthony Liguori
2013-06-10 21:53 ` Anthony Liguori
2013-06-11 8:53 ` Peter Wu [this message]
2013-06-11 8:53 ` Peter Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6223452.CkX1vrxQoH@al \
--to=lekensteyn@gmail.com \
--cc=anthony@codemonkey.ws \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.