All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wei Xu <xuwei5@hisilicon.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ARM: dts: hisilicon: Fix "status" values
Date: Wed, 19 Jul 2023 15:43:29 +0800	[thread overview]
Message-ID: <64B79421.80007@hisilicon.com> (raw)
In-Reply-To: <20230626221019.3946448-1-robh@kernel.org>

Hi Rob,

On 2023/6/27 6:10, Rob Herring wrote:
> The defined value for "status" is "disabled", not "disable".
> 
> Signed-off-by: Rob Herring <robh@kernel.org>

Applied to the HiSilicon arm32 dt tree.
Thanks!

Best Regards,
Wei

> ---
>  arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/hisilicon/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> index c524c854d319..a42b71cdc5d7 100644
> --- a/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> +++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> @@ -54,7 +54,7 @@ uart0: serial@12100000 {
>  			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart1: serial@12101000 {
> @@ -63,7 +63,7 @@ uart1: serial@12101000 {
>  			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart2: serial@12102000 {
> @@ -72,7 +72,7 @@ uart2: serial@12102000 {
>  			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart3: serial@12103000 {
> @@ -81,7 +81,7 @@ uart3: serial@12103000 {
>  			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart4: serial@12104000 {
> @@ -90,7 +90,7 @@ uart4: serial@12104000 {
>  			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		dual_timer0: timer@12000000 {
> @@ -100,7 +100,7 @@ dual_timer0: timer@12000000 {
>  			reg = <0x12000000 0x1000>;
>  			clocks = <&clk_3m>;
>  			clock-names = "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		dual_timer1: timer@12001000 {
> @@ -110,7 +110,7 @@ dual_timer1: timer@12001000 {
>  			reg = <0x12001000 0x1000>;
>  			clocks = <&clk_3m>;
>  			clock-names = "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		dual_timer2: timer@12002000 {
> @@ -120,7 +120,7 @@ dual_timer2: timer@12002000 {
>  			reg = <0x12002000 0x1000>;
>  			clocks = <&clk_3m>;
>  			clock-names = "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		spi_bus0: spi@12120000 {
> @@ -132,7 +132,7 @@ spi_bus0: spi@12120000 {
>  			num-cs = <1>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		spi_bus1: spi@12121000 {
> @@ -144,7 +144,7 @@ spi_bus1: spi@12121000 {
>  			num-cs = <1>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		spi_bus2: spi@12122000 {
> @@ -156,7 +156,7 @@ spi_bus2: spi@12122000 {
>  			num-cs = <1>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		sysctrl: system-controller@12020000 {
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Wei Xu <xuwei5@hisilicon.com>
To: Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] ARM: dts: hisilicon: Fix "status" values
Date: Wed, 19 Jul 2023 15:43:29 +0800	[thread overview]
Message-ID: <64B79421.80007@hisilicon.com> (raw)
In-Reply-To: <20230626221019.3946448-1-robh@kernel.org>

Hi Rob,

On 2023/6/27 6:10, Rob Herring wrote:
> The defined value for "status" is "disabled", not "disable".
> 
> Signed-off-by: Rob Herring <robh@kernel.org>

Applied to the HiSilicon arm32 dt tree.
Thanks!

Best Regards,
Wei

> ---
>  arch/arm/boot/dts/hisilicon/hi3519.dtsi | 22 +++++++++++-----------
>  1 file changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/hisilicon/hi3519.dtsi b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> index c524c854d319..a42b71cdc5d7 100644
> --- a/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> +++ b/arch/arm/boot/dts/hisilicon/hi3519.dtsi
> @@ -54,7 +54,7 @@ uart0: serial@12100000 {
>  			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart1: serial@12101000 {
> @@ -63,7 +63,7 @@ uart1: serial@12101000 {
>  			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart2: serial@12102000 {
> @@ -72,7 +72,7 @@ uart2: serial@12102000 {
>  			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart3: serial@12103000 {
> @@ -81,7 +81,7 @@ uart3: serial@12103000 {
>  			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		uart4: serial@12104000 {
> @@ -90,7 +90,7 @@ uart4: serial@12104000 {
>  			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
>  			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
>  			clock-names = "uartclk", "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		dual_timer0: timer@12000000 {
> @@ -100,7 +100,7 @@ dual_timer0: timer@12000000 {
>  			reg = <0x12000000 0x1000>;
>  			clocks = <&clk_3m>;
>  			clock-names = "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		dual_timer1: timer@12001000 {
> @@ -110,7 +110,7 @@ dual_timer1: timer@12001000 {
>  			reg = <0x12001000 0x1000>;
>  			clocks = <&clk_3m>;
>  			clock-names = "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		dual_timer2: timer@12002000 {
> @@ -120,7 +120,7 @@ dual_timer2: timer@12002000 {
>  			reg = <0x12002000 0x1000>;
>  			clocks = <&clk_3m>;
>  			clock-names = "apb_pclk";
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		spi_bus0: spi@12120000 {
> @@ -132,7 +132,7 @@ spi_bus0: spi@12120000 {
>  			num-cs = <1>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		spi_bus1: spi@12121000 {
> @@ -144,7 +144,7 @@ spi_bus1: spi@12121000 {
>  			num-cs = <1>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		spi_bus2: spi@12122000 {
> @@ -156,7 +156,7 @@ spi_bus2: spi@12122000 {
>  			num-cs = <1>;
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> -			status = "disable";
> +			status = "disabled";
>  		};
>  
>  		sysctrl: system-controller@12020000 {
> 

  parent reply	other threads:[~2023-07-19  7:43 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-26 22:10 [PATCH] ARM: dts: hisilicon: Fix "status" values Rob Herring
2023-06-26 22:10 ` Rob Herring
2023-07-18 16:22 ` Rob Herring
2023-07-18 16:22   ` Rob Herring
2023-07-19  7:43 ` Wei Xu [this message]
2023-07-19  7:43   ` Wei Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=64B79421.80007@hisilicon.com \
    --to=xuwei5@hisilicon.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.