All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Borntraeger <borntraeger@de.ibm.com>
To: Tony Krowiak <akrowiak@linux.vnet.ibm.com>, qemu-devel@nongnu.org
Cc: qemu-s390x@nongnu.org, schwidefsky@de.ibm.com,
	heiko.carstens@de.ibm.com, cohuck@redhat.com, david@redhat.com,
	bjsdjshi@linux.vnet.ibm.com, pmorel@linux.vnet.ibm.com,
	alifm@linux.vnet.ibm.com, mjrosato@linux.vnet.ibm.com,
	jjherne@linux.vnet.ibm.com, pasic@linux.vnet.ibm.com,
	eskultet@redhat.com, berrange@redhat.com,
	alex.williamson@redhat.com, eric.auger@redhat.com,
	pbonzini@redhat.com, peter.maydell@linaro.org, agraf@suse.de,
	rth@twiddle.net, fiuczy@linux.ibm.com, mimu@linux.ibm.com,
	Tony Krowiak <akrowiak@linux.ibm.com>
Subject: Re: [Qemu-devel] [PATCH v10 2/6] s390x/cpumodel: Set up CPU model for AP device support
Date: Tue, 9 Oct 2018 21:14:35 +0200	[thread overview]
Message-ID: <64e5b221-ad4d-059a-9647-57ddf7ab0d0d@de.ibm.com> (raw)
In-Reply-To: <20181009175226.22138-3-akrowiak@linux.vnet.ibm.com>



On 10/09/2018 07:52 PM, Tony Krowiak wrote:
> A new CPU model feature and two new CPU model facilities are
> introduced to support AP devices for a KVM guest.
> 
> CPU model features:
> 
> 1. The S390_FEAT_AP CPU model feature indicates whether AP
>    instructions are available to the guest. This feature will
>    be enabled only if the AP instructions are available on the
>    linux host as determined by the availability of the
>    KVM_S390_VM_CRYPTO_ENABLE_APIE VM attribute which is exposed
>    by KVM only if the AP instructions are available on the
>    host.
> 
>    This feature must be turned on from userspace to execute AP
>    instructions on the KVM guest. The QEMU command line to turn
>    this feature on looks something like this:
> 
> 	qemu-system-s390x ... -cpu xxx,ap=on ...
> 
>    This feature will be supported for zEC12 and newer CPU models.
>    The feature will not be supported for older models because
>    there are few older systems on which to test and the older
>    crypto cards will be going out of service in the relatively
>    near future.
> 
> CPU model facilities:
> 
> 1. The S390_FEAT_AP_QUERY_CONFIG_INFO feature indicates whether the
>    AP Query Configuration Information (QCI) facility is available
>    to the guest as determined by whether the facility is available
>    on the host. This feature will be exposed by KVM only if the
>    QCI facility is installed on the host.
> 
> 2. The S390_FEAT_AP_FACILITY_TEST feature indicates whether the AP
>    Facility Test (APFT) facility is available to the guest as
>    determined by whether the facility is available on the host.
>    This feature will be exposed by KVM only if APFT is installed
>    on the host.
> 
> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
> Tested-by: Pierre Morel<pmorel@linux.ibm.com>


Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>

and as you have moved the one hunk, Davids RB should still count.
> ---
>  target/s390x/cpu_features.c     | 3 +++
>  target/s390x/cpu_features_def.h | 3 +++
>  target/s390x/cpu_models.c       | 2 ++
>  target/s390x/gen-features.c     | 3 +++
>  4 files changed, 11 insertions(+)
> 
> diff --git a/target/s390x/cpu_features.c b/target/s390x/cpu_features.c
> index 172fb18df718..60cfeba48f4e 100644
> --- a/target/s390x/cpu_features.c
> +++ b/target/s390x/cpu_features.c
> @@ -39,8 +39,10 @@ static const S390FeatDef s390_features[] = {
>      FEAT_INIT("srs", S390_FEAT_TYPE_STFL, 9, "Sense-running-status facility"),
>      FEAT_INIT("csske", S390_FEAT_TYPE_STFL, 10, "Conditional-SSKE facility"),
>      FEAT_INIT("ctop", S390_FEAT_TYPE_STFL, 11, "Configuration-topology facility"),
> +    FEAT_INIT("apqci", S390_FEAT_TYPE_STFL, 12, "Query AP Configuration Information facility"),
>      FEAT_INIT("ipter", S390_FEAT_TYPE_STFL, 13, "IPTE-range facility"),
>      FEAT_INIT("nonqks", S390_FEAT_TYPE_STFL, 14, "Nonquiescing key-setting facility"),
> +    FEAT_INIT("apft", S390_FEAT_TYPE_STFL, 15, "AP Facilities Test facility"),
>      FEAT_INIT("etf2", S390_FEAT_TYPE_STFL, 16, "Extended-translation facility 2"),
>      FEAT_INIT("msa-base", S390_FEAT_TYPE_STFL, 17, "Message-security-assist facility (excluding subfunctions)"),
>      FEAT_INIT("ldisp", S390_FEAT_TYPE_STFL, 18, "Long-displacement facility"),
> @@ -129,6 +131,7 @@ static const S390FeatDef s390_features[] = {
>  
>      FEAT_INIT_MISC("dateh2", "DAT-enhancement facility 2"),
>      FEAT_INIT_MISC("cmm", "Collaborative-memory-management facility"),
> +    FEAT_INIT_MISC("ap", "AP instructions installed"),
>  
>      FEAT_INIT("plo-cl", S390_FEAT_TYPE_PLO, 0, "PLO Compare and load (32 bit in general registers)"),
>      FEAT_INIT("plo-clg", S390_FEAT_TYPE_PLO, 1, "PLO Compare and load (64 bit in parameter list)"),
> diff --git a/target/s390x/cpu_features_def.h b/target/s390x/cpu_features_def.h
> index ac2c947f30a8..5fc7e7bf0116 100644
> --- a/target/s390x/cpu_features_def.h
> +++ b/target/s390x/cpu_features_def.h
> @@ -27,8 +27,10 @@ typedef enum {
>      S390_FEAT_SENSE_RUNNING_STATUS,
>      S390_FEAT_CONDITIONAL_SSKE,
>      S390_FEAT_CONFIGURATION_TOPOLOGY,
> +    S390_FEAT_AP_QUERY_CONFIG_INFO,
>      S390_FEAT_IPTE_RANGE,
>      S390_FEAT_NONQ_KEY_SETTING,
> +    S390_FEAT_AP_FACILITIES_TEST,
>      S390_FEAT_EXTENDED_TRANSLATION_2,
>      S390_FEAT_MSA,
>      S390_FEAT_LONG_DISPLACEMENT,
> @@ -119,6 +121,7 @@ typedef enum {
>      /* Misc */
>      S390_FEAT_DAT_ENH_2,
>      S390_FEAT_CMM,
> +    S390_FEAT_AP,
>  
>      /* PLO */
>      S390_FEAT_PLO_CL,
> diff --git a/target/s390x/cpu_models.c b/target/s390x/cpu_models.c
> index 265d25c937bb..7c253ff308c5 100644
> --- a/target/s390x/cpu_models.c
> +++ b/target/s390x/cpu_models.c
> @@ -786,6 +786,8 @@ static void check_consistency(const S390CPUModel *model)
>          { S390_FEAT_PRNO_TRNG_QRTCR, S390_FEAT_MSA_EXT_5 },
>          { S390_FEAT_PRNO_TRNG, S390_FEAT_MSA_EXT_5 },
>          { S390_FEAT_SIE_KSS, S390_FEAT_SIE_F2 },
> +        { S390_FEAT_AP_QUERY_CONFIG_INFO, S390_FEAT_AP },
> +        { S390_FEAT_AP_FACILITIES_TEST, S390_FEAT_AP },
>      };
>      int i;
>  
> diff --git a/target/s390x/gen-features.c b/target/s390x/gen-features.c
> index 384b61cd67b9..70015eaaf5df 100644
> --- a/target/s390x/gen-features.c
> +++ b/target/s390x/gen-features.c
> @@ -447,6 +447,9 @@ static uint16_t full_GEN12_GA1[] = {
>      S390_FEAT_ADAPTER_INT_SUPPRESSION,
>      S390_FEAT_EDAT_2,
>      S390_FEAT_SIDE_EFFECT_ACCESS_ESOP2,
> +    S390_FEAT_AP_QUERY_CONFIG_INFO,
> +    S390_FEAT_AP_FACILITIES_TEST,
> +    S390_FEAT_AP,
>  };
>  
>  static uint16_t full_GEN12_GA2[] = {
> 

  reply	other threads:[~2018-10-09 19:14 UTC|newest]

Thread overview: 42+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-09 17:52 [Qemu-devel] [PATCH v10 0/6] s390x: vfio-ap: guest dedicated crypto adapters Tony Krowiak
2018-10-09 17:52 ` [Qemu-devel] [PATCH v10 1/6] linux-headers: linux header updates for AP support Tony Krowiak
2018-10-10  8:01   ` Cornelia Huck
2018-10-09 17:52 ` [Qemu-devel] [PATCH v10 2/6] s390x/cpumodel: Set up CPU model for AP device support Tony Krowiak
2018-10-09 19:14   ` Christian Borntraeger [this message]
2018-10-09 19:48     ` David Hildenbrand
2018-10-10 13:50       ` Tony Krowiak
2018-10-10  8:11   ` Cornelia Huck
2018-10-10  8:12     ` [Qemu-devel] [qemu-s390x] " Christian Borntraeger
2018-10-10 11:31   ` [Qemu-devel] " Halil Pasic
2018-10-09 17:52 ` [Qemu-devel] [PATCH v10 3/6] s390x/kvm: enable AP instruction interpretation for guest Tony Krowiak
2018-10-09 19:48   ` David Hildenbrand
2018-10-10  7:19   ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2018-10-10  8:12   ` Christian Borntraeger
2018-10-10 11:38   ` Halil Pasic
2018-10-10 11:53     ` Cornelia Huck
2018-10-09 17:52 ` [Qemu-devel] [PATCH v10 4/6] s390x/ap: base Adjunct Processor (AP) object model Tony Krowiak
2018-10-10  7:28   ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2018-10-10  8:14   ` [Qemu-devel] " Cornelia Huck
2018-10-10 13:59     ` Tony Krowiak
2018-10-10 14:16       ` Cornelia Huck
2018-10-10 11:45   ` [Qemu-devel] [qemu-s390x] " Halil Pasic
2018-10-09 17:52 ` [Qemu-devel] [PATCH v10 5/6] s390x/vfio: ap: Introduce VFIO AP device Tony Krowiak
2018-10-09 19:51   ` David Hildenbrand
2018-10-10  7:29     ` Pierre Morel
2018-10-10  7:55       ` Cornelia Huck
2018-10-10 14:04     ` Tony Krowiak
2018-10-10  8:25   ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2018-10-10  8:52     ` Cornelia Huck
2018-10-10 14:13       ` Tony Krowiak
2018-10-10 14:12     ` Tony Krowiak
2018-10-10  9:21   ` [Qemu-devel] " Cornelia Huck
2018-10-10 15:49     ` Tony Krowiak
2018-10-10 11:52   ` Halil Pasic
2018-10-10 12:33   ` Pierre Morel
2018-10-10 12:37   ` Pierre Morel
2018-10-10 12:49     ` Christian Borntraeger
2018-10-10 14:20       ` Tony Krowiak
2018-10-09 17:52 ` [Qemu-devel] [PATCH v10 6/6] s390: doc: detailed specifications for AP virtualization Tony Krowiak
2018-10-10  8:14   ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2018-10-10 14:23     ` Tony Krowiak
2018-10-10  9:23   ` [Qemu-devel] " Cornelia Huck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=64e5b221-ad4d-059a-9647-57ddf7ab0d0d@de.ibm.com \
    --to=borntraeger@de.ibm.com \
    --cc=agraf@suse.de \
    --cc=akrowiak@linux.ibm.com \
    --cc=akrowiak@linux.vnet.ibm.com \
    --cc=alex.williamson@redhat.com \
    --cc=alifm@linux.vnet.ibm.com \
    --cc=berrange@redhat.com \
    --cc=bjsdjshi@linux.vnet.ibm.com \
    --cc=cohuck@redhat.com \
    --cc=david@redhat.com \
    --cc=eric.auger@redhat.com \
    --cc=eskultet@redhat.com \
    --cc=fiuczy@linux.ibm.com \
    --cc=heiko.carstens@de.ibm.com \
    --cc=jjherne@linux.vnet.ibm.com \
    --cc=mimu@linux.ibm.com \
    --cc=mjrosato@linux.vnet.ibm.com \
    --cc=pasic@linux.vnet.ibm.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=pmorel@linux.vnet.ibm.com \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-s390x@nongnu.org \
    --cc=rth@twiddle.net \
    --cc=schwidefsky@de.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.