All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v1 1/2] Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO
@ 2025-03-11 19:55 Luiz Augusto von Dentz
  2025-03-11 19:55 ` [PATCH v1 2/2] Bluetooth: hci_vhci: Mark Sync Flow Control as supported Luiz Augusto von Dentz
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Luiz Augusto von Dentz @ 2025-03-11 19:55 UTC (permalink / raw)
  To: linux-bluetooth

From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This enables buffer flow control for SCO/eSCO
(see: Bluetooth Core 6.0 spec: 6.22. Synchronous Flow Control Enable),
recently this has caused the following problem and is actually a nice
addition for the likes of Socket TX complete:

< HCI Command: Read Buffer Size (0x04|0x0005) plen 0
> HCI Event: Command Complete (0x0e) plen 11
      Read Buffer Size (0x04|0x0005) ncmd 1
        Status: Success (0x00)
        ACL MTU: 1021 ACL max packet: 5
        SCO MTU: 240  SCO max packet: 8
...
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
< SCO Data TX: Handle 257 flags 0x00 dlen 120
> HCI Event: Hardware Error (0x10) plen 1
        Code: 0x0a

To fix the code will now attempt to enable buffer flow control:

< HCI Command: Write Sync Fl.. (0x03|0x002f) plen 1
        Flow control: Enabled (0x01)
> HCI Event: Command Complete (0x0e) plen 4
      Write Sync Flow Control Enable (0x03|0x002f) ncmd 1
        Status: Success (0x00)

And then test it by sending an empty packet to confirm the controller
will generate HCI_EV_NUM_COMP_PKTS events:

sco-tester[40]: < SCO Data TX:.. flags 0x00 dlen 9
> HCI Event: Number of Completed P.. (0x13) plen 5
        Num handles: 1
        Handle: 42 Address: 00:AA:01:01:00:00 (Intel Corporation)
        Count: 1
        #103: len 10 (40 Kb/s)
        Latency: 2 msec (2-2 msec ~2 msec)

Fixes: 7fedd3bb6b77 ("Bluetooth: Prioritize SCO traffic")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
---
 include/net/bluetooth/hci.h      | 13 +++++++
 include/net/bluetooth/hci_core.h |  1 +
 net/bluetooth/hci_core.c         | 67 ++++++++++++++++----------------
 net/bluetooth/hci_event.c        |  2 +
 net/bluetooth/hci_sync.c         | 24 ++++++++++++
 5 files changed, 74 insertions(+), 33 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index b99818df8ee7..3c8f95174fcf 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -208,6 +208,13 @@ enum {
 	 */
 	HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
 
+	/* When this quirk is set consider Sync Flow Control as supported by
+	 * the driver.
+	 *
+	 * This quirk must be set before hci_register_dev is called.
+	 */
+	HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED,
+
 	/* When this quirk is set, the LE states reported through the
 	 * HCI_LE_READ_SUPPORTED_STATES are invalid/broken.
 	 *
@@ -448,6 +455,7 @@ enum {
 	HCI_WIDEBAND_SPEECH_ENABLED,
 	HCI_EVENT_FILTER_CONFIGURED,
 	HCI_PA_SYNC,
+	HCI_SCO_FLOWCTL,
 
 	HCI_DUT_MODE,
 	HCI_VENDOR_DIAG,
@@ -1544,6 +1552,11 @@ struct hci_rp_read_tx_power {
 	__s8     tx_power;
 } __packed;
 
+#define HCI_OP_WRITE_SYNC_FLOWCTL	0x0c2f
+struct hci_cp_write_sync_flowctl {
+	__u8     enable;
+} __packed;
+
 #define HCI_OP_READ_PAGE_SCAN_TYPE	0x0c46
 struct hci_rp_read_page_scan_type {
 	__u8     status;
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 7966db4038cc..f78e4298e39a 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -1858,6 +1858,7 @@ void hci_conn_del_sysfs(struct hci_conn *conn);
 #define lmp_hold_capable(dev)      ((dev)->features[0][0] & LMP_HOLD)
 #define lmp_sniff_capable(dev)     ((dev)->features[0][0] & LMP_SNIFF)
 #define lmp_park_capable(dev)      ((dev)->features[0][1] & LMP_PARK)
+#define lmp_sco_capable(dev)       ((dev)->features[0][1] & LMP_SCO)
 #define lmp_inq_rssi_capable(dev)  ((dev)->features[0][3] & LMP_RSSI_INQ)
 #define lmp_esco_capable(dev)      ((dev)->features[0][3] & LMP_ESCO)
 #define lmp_bredr_capable(dev)     (!((dev)->features[0][4] & LMP_NO_BREDR))
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 012fc107901a..efba2b539902 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -3552,51 +3552,52 @@ static void __check_timeout(struct hci_dev *hdev, unsigned int cnt, u8 type)
 }
 
 /* Schedule SCO */
-static void hci_sched_sco(struct hci_dev *hdev)
+static void hci_sched_sco_type(struct hci_dev *hdev, __u8 type)
 {
 	struct hci_conn *conn;
 	struct sk_buff *skb;
 	int quote;
+	unsigned int pkts;
 
-	BT_DBG("%s", hdev->name);
+	bt_dev_dbg(hdev, "type %u", type);
 
-	if (!hci_conn_num(hdev, SCO_LINK))
+	if (!hci_conn_num(hdev, type))
 		return;
 
-	while (hdev->sco_cnt && (conn = hci_low_sent(hdev, SCO_LINK, &quote))) {
+	/* Use sco_pkts if flow control has not been enabled yet which will
+	 * limit the amount of buffer sent in a row.
+	 */
+	if (!hci_dev_test_flag(hdev, HCI_SCO_FLOWCTL))
+		pkts = hdev->sco_pkts;
+	else
+		pkts = hdev->sco_cnt;
+
+	if (!pkts)
+		return;
+
+	while (pkts && (conn = hci_low_sent(hdev, type, &quote))) {
 		while (quote-- && (skb = skb_dequeue(&conn->data_q))) {
 			BT_DBG("skb %p len %d", skb, skb->len);
 			hci_send_frame(hdev, skb);
 
+			pkts--;
+
+			if (hdev->sco_cnt > 0)
+				hdev->sco_cnt--;
+
 			conn->sent++;
 			if (conn->sent == ~0)
 				conn->sent = 0;
 		}
 	}
-}
 
-static void hci_sched_esco(struct hci_dev *hdev)
-{
-	struct hci_conn *conn;
-	struct sk_buff *skb;
-	int quote;
-
-	BT_DBG("%s", hdev->name);
-
-	if (!hci_conn_num(hdev, ESCO_LINK))
-		return;
-
-	while (hdev->sco_cnt && (conn = hci_low_sent(hdev, ESCO_LINK,
-						     &quote))) {
-		while (quote-- && (skb = skb_dequeue(&conn->data_q))) {
-			BT_DBG("skb %p len %d", skb, skb->len);
-			hci_send_frame(hdev, skb);
-
-			conn->sent++;
-			if (conn->sent == ~0)
-				conn->sent = 0;
-		}
-	}
+	/* Rescheduled if all packets were sent and flow control is not enabled
+	 * as there could be more packets queued that could not be sent and
+	 * since no HCI_EV_NUM_COMP_PKTS event will be generated the reschedule
+	 * needs to be forced.
+	 */
+	if (!pkts && !hci_dev_test_flag(hdev, HCI_SCO_FLOWCTL))
+		queue_work(hdev->workqueue, &hdev->tx_work);
 }
 
 static void hci_sched_acl_pkt(struct hci_dev *hdev)
@@ -3632,8 +3633,8 @@ static void hci_sched_acl_pkt(struct hci_dev *hdev)
 			chan->conn->sent++;
 
 			/* Send pending SCO packets right away */
-			hci_sched_sco(hdev);
-			hci_sched_esco(hdev);
+			hci_sched_sco_type(hdev, SCO_LINK);
+			hci_sched_sco_type(hdev, ESCO_LINK);
 		}
 	}
 
@@ -3688,8 +3689,8 @@ static void hci_sched_le(struct hci_dev *hdev)
 			chan->conn->sent++;
 
 			/* Send pending SCO packets right away */
-			hci_sched_sco(hdev);
-			hci_sched_esco(hdev);
+			hci_sched_sco_type(hdev, SCO_LINK);
+			hci_sched_sco_type(hdev, ESCO_LINK);
 		}
 	}
 
@@ -3734,8 +3735,8 @@ static void hci_tx_work(struct work_struct *work)
 
 	if (!hci_dev_test_flag(hdev, HCI_USER_CHANNEL)) {
 		/* Schedule queues and send stuff to HCI driver */
-		hci_sched_sco(hdev);
-		hci_sched_esco(hdev);
+		hci_sched_sco_type(hdev, SCO_LINK);
+		hci_sched_sco_type(hdev, ESCO_LINK);
 		hci_sched_iso(hdev);
 		hci_sched_acl(hdev);
 		hci_sched_le(hdev);
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 19e19c9f5e68..6d0138b778aa 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -4445,9 +4445,11 @@ static void hci_num_comp_pkts_evt(struct hci_dev *hdev, void *data,
 			break;
 
 		case SCO_LINK:
+		case ESCO_LINK:
 			hdev->sco_cnt += count;
 			if (hdev->sco_cnt > hdev->sco_pkts)
 				hdev->sco_cnt = hdev->sco_pkts;
+
 			break;
 
 		case ISO_LINK:
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index c4c2cf51b219..609b035e5c90 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -3769,6 +3769,28 @@ static int hci_write_ca_timeout_sync(struct hci_dev *hdev)
 				     sizeof(param), &param, HCI_CMD_TIMEOUT);
 }
 
+/* Enable SCO flow control if supported */
+static int hci_write_sync_flowctl_sync(struct hci_dev *hdev)
+{
+	struct hci_cp_write_sync_flowctl cp;
+	int err;
+
+	/* Check if the controller supports SCO and HCI_OP_WRITE_SYNC_FLOWCTL */
+	if (!lmp_sco_capable(hdev) || !(hdev->commands[10] & BIT(4)) ||
+	    !test_bit(HCI_QUIRK_SYNC_FLOWCTL_SUPPORTED, &hdev->quirks))
+		return 0;
+
+	memset(&cp, 0, sizeof(cp));
+	cp.enable = 0x01;
+
+	err = __hci_cmd_sync_status(hdev, HCI_OP_WRITE_SYNC_FLOWCTL,
+				    sizeof(cp), &cp, HCI_CMD_TIMEOUT);
+	if (!err)
+		hci_dev_set_flag(hdev, HCI_SCO_FLOWCTL);
+
+	return err;
+}
+
 /* BR Controller init stage 2 command sequence */
 static const struct hci_init_stage br_init2[] = {
 	/* HCI_OP_READ_BUFFER_SIZE */
@@ -3787,6 +3809,8 @@ static const struct hci_init_stage br_init2[] = {
 	HCI_INIT(hci_clear_event_filter_sync),
 	/* HCI_OP_WRITE_CA_TIMEOUT */
 	HCI_INIT(hci_write_ca_timeout_sync),
+	/* HCI_OP_WRITE_SYNC_FLOWCTL */
+	HCI_INIT(hci_write_sync_flowctl_sync),
 	{}
 };
 
-- 
2.48.1


^ permalink raw reply related	[flat|nested] 5+ messages in thread
end of thread, other threads:[~2025-03-11 22:38 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2025-03-11 19:55 [PATCH v1 1/2] Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO Luiz Augusto von Dentz
2025-03-11 19:55 ` [PATCH v1 2/2] Bluetooth: hci_vhci: Mark Sync Flow Control as supported Luiz Augusto von Dentz
2025-03-11 20:34 ` [v1,1/2] Bluetooth: hci_core: Enable buffer flow control for SCO/eSCO bluez.test.bot
2025-03-11 22:21 ` [PATCH v1 1/2] " Pauli Virtanen
2025-03-11 22:38   ` Luiz Augusto von Dentz

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.