[PATCH] Bluetooth: btusb: Add RTL8851BE device 0x13d3:0x3601

[PATCH] Bluetooth: btusb: Add RTL8851BE device 0x13d3:0x3601

[WangYuli]

The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below:

T:  Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3601 Rev= 0.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms

Co-developed-by: Hao Li <lihao1@uniontech.com>
Signed-off-by: Hao Li <lihao1@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
---
 drivers/bluetooth/btusb.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 9ab661d2d1e6..aa7ade6a1866 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -515,6 +515,7 @@ static const struct usb_device_id quirks_table[] = {
 	/* Realtek 8851BE Bluetooth devices */
 	{ USB_DEVICE(0x0bda, 0xb850), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x13d3, 0x3600), .driver_info = BTUSB_REALTEK },
+	{ USB_DEVICE(0x13d3, 0x3601), .driver_info = BTUSB_REALTEK },
 
 	/* Realtek 8852AE Bluetooth devices */
 	{ USB_DEVICE(0x0bda, 0x2852), .driver_info = BTUSB_REALTEK |
-- 
2.50.0

RE: Bluetooth: btusb: Add RTL8851BE device 0x13d3:0x3601

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 552 bytes --]

This is an automated email and please do not reply to this email.

Dear Submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
While preparing the CI tests, the patches you submitted couldn't be applied to the current HEAD of the repository.

----- Output -----

error: patch failed: drivers/bluetooth/btusb.c:515
error: drivers/bluetooth/btusb.c: patch does not apply
hint: Use 'git am --show-current-patch' to see the failed patch

Please resolve the issue and submit the patches again.


---
Regards,
Linux Bluetooth

Re: Bluetooth: btusb: Add RTL8851BE device 0x13d3:0x3601

[WangYuli]

[-- Attachment #1.1.1: Type: text/plain, Size: 1208 bytes --]

Hi all,

Please forgive my ignorance, but I'm not sure how to get the code from 
the latest development branch of the Bluetooth subsystem so that my 
patch can pass the automated checks.

This patch applies cleanly to the current Linux mainline without any 
conflicts.

I did find the bluetooth-next repository 
(https://kernel.googlesource.com/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git), 
but it seems all of its branches haven't been updated for a while.

On 2025/7/10 16:23, bluez.test.bot@gmail.com wrote:
> This is an automated email and please do not reply to this email.
I'm sorry that I have to reply to you. :-)
>
> Dear Submitter,
>
> Thank you for submitting the patches to the linux bluetooth mailing list.
> While preparing the CI tests, the patches you submitted couldn't be applied to the current HEAD of the repository.
>
> ----- Output -----
>
> error: patch failed: drivers/bluetooth/btusb.c:515
> error: drivers/bluetooth/btusb.c: patch does not apply
> hint: Use 'git am --show-current-patch' to see the failed patch
>
> Please resolve the issue and submit the patches again.
>
>
> ---
> Regards,
> Linux Bluetooth
>
Thanks,
-- 
WangYuli

[-- Attachment #1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 645 bytes --]

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 236 bytes --]