RE: arm64: dts: qcom: lemans-evk: Enable Bluetooth support

RE: arm64: dts: qcom: lemans-evk: Enable Bluetooth support

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 2463 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1021398

---Test result---

Test Summary:
CheckPatch                    PENDING   0.35 seconds
GitLint                       PENDING   0.22 seconds
SubjectPrefix                 FAIL      0.32 seconds
BuildKernel                   PASS      25.28 seconds
CheckAllWarning               PASS      28.49 seconds
CheckSparse                   PASS      30.76 seconds
BuildKernel32                 PASS      24.57 seconds
TestRunnerSetup               PASS      493.78 seconds
TestRunner_l2cap-tester       PASS      23.77 seconds
TestRunner_iso-tester         PASS      65.94 seconds
TestRunner_bnep-tester        PASS      6.87 seconds
TestRunner_mgmt-tester        FAIL      116.88 seconds
TestRunner_rfcomm-tester      PASS      9.15 seconds
TestRunner_sco-tester         PASS      14.29 seconds
TestRunner_ioctl-tester       PASS      9.79 seconds
TestRunner_mesh-tester        FAIL      11.44 seconds
TestRunner_smp-tester         PASS      8.49 seconds
TestRunner_userchan-tester    PASS      6.50 seconds
IncrementalBuild              PENDING   0.67 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 492, Passed: 487 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
Read Exp Feature - Success                           Failed       0.105 seconds
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0

Failed Test Cases
Mesh - Send cancel - 1                               Timed out    1.964 seconds
Mesh - Send cancel - 2                               Timed out    1.997 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:



---
Regards,
Linux Bluetooth

[PATCH v2 0/1] arm64: dts: qcom: lemans-evk: Enable Bluetooth support

[Wei Deng]

Changes for v2
- Update commit message
- Remove qup_uart17 settings
- Remove CC stable
- V1 link
  https://lore.kernel.org/all/20251110055709.319587-1-wei.deng@oss.qualcomm.com/

Wei Deng (1):
  arm64: dts: qcom: lemans-evk: Enable Bluetooth support

 arch/arm64/boot/dts/qcom/lemans-evk.dts | 99 +++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

-- 
2.25.1

[PATCH v2 1/1] arm64: dts: qcom: lemans-evk: Enable Bluetooth support

[Wei Deng]

There's a WCN6855 WiFi/Bluetooth module on an M.2 card. To make
Bluetooth work, we need to define the necessary device tree nodes,
including UART configuration and power supplies.

Since there is no standard M.2 binding in the device tree at present,
the PMU is described using dedicated PMU nodes to represent the
internal regulators required by the module.

The module provides a 3.3V supply, which originates from the
main board’s 12V rail. To represent this power hierarchy in the device
tree, add a fixed 12V regulator node as the DC-IN source and link it
to the 3.3V regulator node.

Signed-off-by: Wei Deng <wei.deng@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts | 99 +++++++++++++++++++++++++
 1 file changed, 99 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index b40fa203e4a2..89f3f001fdcf 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -21,6 +21,7 @@ aliases {
 		ethernet0 = &ethernet0;
 		mmc1 = &sdhc;
 		serial0 = &uart10;
+		serial1 = &uart17;
 	};
 
 	dmic: audio-codec-0 {
@@ -110,6 +111,17 @@ vmmc_sdc: regulator-vmmc-sdc {
 		regulator-max-microvolt = <2950000>;
 	};
 
+	vreg_dcin_12v: regulator-dcin-12v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_DCIN_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
 	vreg_sdc: regulator-vreg-sdc {
 		compatible = "regulator-gpio";
 
@@ -123,6 +135,75 @@ vreg_sdc: regulator-vreg-sdc {
 
 		startup-delay-us = <100>;
 	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		vin-supply = <&vreg_dcin_12v>;
+
+		regulator-boot-on;
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		vddio-supply = <&vreg_wcn_3p3>;
+		vddaon-supply = <&vreg_wcn_3p3>;
+		vddpmu-supply = <&vreg_wcn_3p3>;
+		vddpmumx-supply = <&vreg_wcn_3p3>;
+		vddpmucx-supply = <&vreg_wcn_3p3>;
+		vddrfa0p95-supply = <&vreg_wcn_3p3>;
+		vddrfa1p3-supply = <&vreg_wcn_3p3>;
+		vddrfa1p9-supply = <&vreg_wcn_3p3>;
+		vddpcielp3-supply = <&vreg_wcn_3p3>;
+		vddpcielp9-supply = <&vreg_wcn_3p3>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -761,6 +842,24 @@ &uart10 {
 	status = "okay";
 };
 
+&uart17 {
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "qcom,wcn6855-bt";
+		max-speed = <3200000>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
 &ufs_mem_hc {
 	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
 	vcc-supply = <&vreg_l8a>;
-- 
2.25.1

RE: arm64: dts: qcom: lemans-evk: Enable Bluetooth support

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 2463 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1022341

---Test result---

Test Summary:
CheckPatch                    PENDING   0.35 seconds
GitLint                       PENDING   0.27 seconds
SubjectPrefix                 FAIL      0.34 seconds
BuildKernel                   PASS      25.03 seconds
CheckAllWarning               PASS      27.06 seconds
CheckSparse                   PASS      30.47 seconds
BuildKernel32                 PASS      24.52 seconds
TestRunnerSetup               PASS      490.46 seconds
TestRunner_l2cap-tester       PASS      23.45 seconds
TestRunner_iso-tester         PASS      76.55 seconds
TestRunner_bnep-tester        PASS      6.13 seconds
TestRunner_mgmt-tester        FAIL      111.28 seconds
TestRunner_rfcomm-tester      PASS      9.16 seconds
TestRunner_sco-tester         PASS      14.33 seconds
TestRunner_ioctl-tester       PASS      9.97 seconds
TestRunner_mesh-tester        FAIL      11.52 seconds
TestRunner_smp-tester         PASS      8.35 seconds
TestRunner_userchan-tester    PASS      6.53 seconds
IncrementalBuild              PENDING   0.59 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: SubjectPrefix - FAIL
Desc: Check subject contains "Bluetooth" prefix
Output:
"Bluetooth: " prefix is not specified in the subject
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 492, Passed: 487 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
Read Exp Feature - Success                           Failed       0.100 seconds
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0

Failed Test Cases
Mesh - Send cancel - 1                               Timed out    2.082 seconds
Mesh - Send cancel - 2                               Timed out    1.996 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series
Output:



---
Regards,
Linux Bluetooth

Re: [PATCH v2 0/1] arm64: dts: qcom: lemans-evk: Enable Bluetooth support

[Rob Herring (Arm)]

On Wed, 12 Nov 2025 12:41:46 +0530, Wei Deng wrote:
> Changes for v2
> - Update commit message
> - Remove qup_uart17 settings
> - Remove CC stable
> - V1 link
>   https://lore.kernel.org/all/20251110055709.319587-1-wei.deng@oss.qualcomm.com/
> 
> Wei Deng (1):
>   arm64: dts: qcom: lemans-evk: Enable Bluetooth support
> 
>  arch/arm64/boot/dts/qcom/lemans-evk.dts | 99 +++++++++++++++++++++++++
>  1 file changed, 99 insertions(+)
> 
> --
> 2.25.1
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: attempting to guess base-commit...
 Base: tags/next-20251112 (exact match)
 Base: tags/next-20251112 (use --merge-base to override)

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20251112071147.1450258-1-wei.deng@oss.qualcomm.com:

arch/arm64/boot/dts/qcom/lemans-evk.dtb: wcn6855-pmu (qcom,wcn6855-pmu): 'vddpcielp3-supply', 'vddpcielp9-supply' do not match any of the regexes: '^pinctrl-[0-9]+$'
	from schema $id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml
arch/arm64/boot/dts/qcom/lemans-evk.dtb: wcn6855-pmu (qcom,wcn6855-pmu): 'vddpcie1p3-supply' is a required property
	from schema $id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml
arch/arm64/boot/dts/qcom/lemans-evk.dtb: wcn6855-pmu (qcom,wcn6855-pmu): 'vddpcie1p9-supply' is a required property
	from schema $id: http://devicetree.org/schemas/regulator/qcom,qca6390-pmu.yaml