* Re: Private message regarding: [syzbot] [fs?] KMSAN: kernel-infoleak-after-free in anon_pipe_read [not found] <e3d876de-cee9-457c-bbde-648e3507ba63n@googlegroups.com> @ 2026-01-12 9:44 ` syzbot 0 siblings, 0 replies; 2+ messages in thread From: syzbot @ 2026-01-12 9:44 UTC (permalink / raw) To: kapoorarnav43; +Cc: kapoorarnav43, linux-kernel, syzkaller-bugs > From: Arnav Kapoor <kapoorarnav43@gmail.com> > Date: Sun, 12 Jan 2026 16:45:00 +0000 > Subject: [PATCH] mm/zswap: clear folio before decompression to prevent > infoleak > > #syz test > > KMSAN reported an infoleak in anon_pipe_read() where uninitialized memory > from a decompressed zswap page was copied to userspace: > > BUG: KMSAN: kernel-infoleak-after-free in anon_pipe_read+0x769/0x1e80 > Uninit was stored to memory at: > zswap_decompress+0x2bd/0x1000 mm/zswap.c:946 > Bytes 0-1023 of 1024 are uninitialized > > The issue occurs when zswap decompresses a page but the decompression > doesn't write a full PAGE_SIZE of data. The function zswap_decompress() > writes decompressed data directly into the folio without first clearing > it. If the decompressed size is less than PAGE_SIZE (which can happen > with certain compression algorithms or corrupted data), or if > decompression fails partway through, the remainder of the page contains > uninitialized memory. > > This uninitialized data can then: > 1. Be placed in pipe buffers when the page is used in splice operations > 2. Get copied to userspace via read() on the pipe > 3. Leak kernel memory contents to userspace > > The call chain observed: > zswap_load() > -> zswap_decompress() [writes partial data to folio] > -> [folio ends up in pipe buffer via shmem_file_splice_read] > -> anon_pipe_read() > -> copy_page_to_iter() [copies uninitialized tail to userspace] > > Fix this by clearing the entire folio before decompression. This ensures > that even if decompression writes less than PAGE_SIZE, or fails after > partial write, the remainder of the page contains zeros rather than > uninitialized memory. > > We use folio_zero_range() which is efficient as it can use optimized > memset implementations and handles compound pages correctly. > > Alternative approaches considered: > 1. Zero only the tail after decompression - more complex, requires > tracking actual bytes written, and doesn't help if decompression fails > 2. Check dlen and zero tail only when dlen < PAGE_SIZE - still leaves > a race if decompression fails after partial write > > The performance impact is minimal since: > - This is a relatively rare path (swap-in from zswap) > - Modern CPUs have efficient memory zeroing (often using cache-bypassing > instructions) > - The cost is much less than the decompression itself > > Reported-by: syzbot+175753aff92b396b1f30@syzkaller.appspotmail.com > Closes: https://syzkaller.appspot.com/bug?extid=175753aff92b396b1f30 > Fixes: 0ab0abcf5115 ("mm/zswap: remove the memcpy if acomp is not > sleepable") > Signed-off-by: Arnav Kapoor <kapoorarnav43@gmail.com> > --- > mm/zswap.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/mm/zswap.c b/mm/zswap.c > index 000000000000..111111111111 100644 > --- a/mm/zswap.c > +++ b/mm/zswap.c > @@ -932,6 +932,13 @@ static bool zswap_decompress(struct zswap_entry > *entry, struct folio *folio) > int decomp_ret = 0, dlen = PAGE_SIZE; > u8 *src, *obj; > + /* > + * Clear the folio before decompression to prevent leaking uninitialized > + * memory to userspace if decompression writes less than PAGE_SIZE or > + * fails partway through. > + */ > + folio_zero_range(folio, 0, folio_size(folio)); > + > acomp_ctx = acomp_ctx_get_cpu_lock(pool); > obj = zs_obj_read_begin(pool->zs_pool, entry->handle, acomp_ctx->buffer); > -- > 2.43.0 > > > > > On Monday, 12 January 2026 at 14:05:27 UTC+5:30 syzbot wrote: > > Hello, > > syzbot found the following issue on: > > HEAD commit: 7f98ab9da046 Merge tag 'for-6.19-rc4-tag' of git://git.ker.. > git tree: upstream > console output: https://syzkaller.appspot.com/x/log.txt?x=1334af92580000 > kernel config: https://syzkaller.appspot.com/x/.config?x=b3903bdf68407a14 > dashboard link: https://syzkaller.appspot.com/bug?extid=175753aff92b396b1f30 > compiler: Debian clang version 20.1.8 > (++20250708063551+0c9f909b7976-1~exp1~20250708183702.136), Debian LLD > 20.1.8 > userspace arch: i386 > > Unfortunately, I don't have any reproducer for this issue yet. > > Downloadable assets: > disk image: > https://storage.googleapis.com/syzbot-assets/c40942ffda39/disk-7f98ab9d.raw.xz > vmlinux: > https://storage.googleapis.com/syzbot-assets/63f72388d8d6/vmlinux-7f98ab9d.xz > kernel image: > https://storage.googleapis.com/syzbot-assets/751895685a54/bzImage-7f98ab9d.xz > > IMPORTANT: if you fix the issue, please add the following tag to the > commit: > Reported-by: syzbot+175753...@syzkaller.appspotmail.com > > ===================================================== > BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user > include/linux/instrumented.h:114 [inline] > BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter > lib/iov_iter.c:24 [inline] > BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf > include/linux/iov_iter.h:30 [inline] > BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 > include/linux/iov_iter.h:302 [inline] > BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance > include/linux/iov_iter.h:330 [inline] > BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0xef3/0x33f0 > lib/iov_iter.c:197 > instrument_copy_to_user include/linux/instrumented.h:114 [inline] > copy_to_user_iter lib/iov_iter.c:24 [inline] > iterate_ubuf include/linux/iov_iter.h:30 [inline] > iterate_and_advance2 include/linux/iov_iter.h:302 [inline] > iterate_and_advance include/linux/iov_iter.h:330 [inline] > _copy_to_iter+0xef3/0x33f0 lib/iov_iter.c:197 > copy_page_to_iter+0x482/0x910 lib/iov_iter.c:374 > anon_pipe_read+0x769/0x1e80 fs/pipe.c:343 > new_sync_read fs/read_write.c:491 [inline] > vfs_read+0x8ed/0xf90 fs/read_write.c:572 > ksys_read fs/read_write.c:715 [inline] > __do_sys_read fs/read_write.c:724 [inline] > __se_sys_read fs/read_write.c:722 [inline] > __ia32_sys_read+0x1f9/0x4d0 fs/read_write.c:722 > ia32_sys_call+0x191f/0x4340 arch/x86/include/generated/asm/syscalls_32.h:4 > do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] > __do_fast_syscall_32+0x154/0x320 arch/x86/entry/syscall_32.c:307 > do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:332 > do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:370 > entry_SYSENTER_compat_after_hwframe+0x84/0x8e > > Uninit was stored to memory at: > memcpy_to_folio include/linux/highmem.h:518 [inline] > zswap_decompress+0x2bd/0x1000 mm/zswap.c:946 > zswap_load+0x262/0x570 mm/zswap.c:1627 > swap_read_folio+0x662/0x3050 mm/page_io.c:637 > swap_cluster_readahead+0x725/0xb20 mm/swap_state.c:652 > shmem_swapin_cluster mm/shmem.c:1745 [inline] > shmem_swapin_folio+0x1fd9/0x3ee0 mm/shmem.c:2329 > shmem_get_folio_gfp+0x92a/0x1fc0 mm/shmem.c:2489 > shmem_get_folio mm/shmem.c:2662 [inline] > shmem_file_splice_read+0x350/0x11e0 mm/shmem.c:3567 > do_splice_read fs/splice.c:982 [inline] > splice_file_to_pipe+0x5b4/0x8f0 fs/splice.c:1292 > do_splice+0x29d8/0x30d0 fs/splice.c:1376 > __do_splice fs/splice.c:1433 [inline] > __do_sys_splice fs/splice.c:1636 [inline] > __se_sys_splice+0x549/0x8c0 fs/splice.c:1618 > __ia32_sys_splice+0x112/0x1a0 fs/splice.c:1618 > ia32_sys_call+0x31a6/0x4340 > arch/x86/include/generated/asm/syscalls_32.h:314 > do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] > __do_fast_syscall_32+0x154/0x320 arch/x86/entry/syscall_32.c:307 > do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:332 > do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:370 > entry_SYSENTER_compat_after_hwframe+0x84/0x8e > > Uninit was created at: > free_pages_prepare mm/page_alloc.c:1328 [inline] > free_unref_folios+0x26a/0x29a0 mm/page_alloc.c:3000 > folios_put_refs+0xaac/0xb10 mm/swap.c:1002 > folios_put include/linux/mm.h:1671 [inline] > __folio_batch_release+0xe1/0x100 mm/swap.c:1062 > folio_batch_release include/linux/pagevec.h:101 [inline] > shmem_undo_range+0x929/0x20c0 mm/shmem.c:1137 > shmem_truncate_range mm/shmem.c:1249 [inline] > shmem_evict_inode+0x22c/0xed0 mm/shmem.c:1379 > evict+0x6a9/0xca0 fs/inode.c:837 > iput_final fs/inode.c:1951 [inline] > iput+0xc6f/0x1070 fs/inode.c:2003 > do_unlinkat+0x58a/0xd80 fs/namei.c:5443 > __do_sys_unlink fs/namei.c:5474 [inline] > __se_sys_unlink fs/namei.c:5472 [inline] > __ia32_sys_unlink+0x70/0xa0 fs/namei.c:5472 > ia32_sys_call+0x1e4a/0x4340 arch/x86/include/generated/asm/syscalls_32.h:11 > do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] > __do_fast_syscall_32+0x154/0x320 arch/x86/entry/syscall_32.c:307 > do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:332 > do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:370 > entry_SYSENTER_compat_after_hwframe+0x84/0x8e > > Bytes 0-1023 of 1024 are uninitialized > Memory access of size 1024 starts at ffff8880731d2000 > Data copied to user address 0000000056912be0 > > CPU: 1 UID: 0 PID: 5779 Comm: syz-executor Tainted: G W syzkaller #0 > PREEMPT(none) > Tainted: [W]=WARN > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS > Google 10/25/2025 > ===================================================== > > > --- > This report is generated by a bot. It may contain errors. > See https://goo.gl/tpsmEJ for more information about syzbot. > syzbot engineers can be reached at syzk...@googlegroups.com. > > syzbot will keep track of this issue. See: > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > If the report is already addressed, let syzbot know by replying with: > #syz fix: exact-commit-title > > If you want to overwrite report's subsystems, reply with: > #syz set subsystems: new-subsystem > (See the list of subsystem names on the web dashboard) > > If the report is a duplicate of another one, reply with: > #syz dup: exact-subject-of-another-report > > If you want to undo deduplication, reply with: > #syz undup > Command #1: This crash does not have a reproducer. I cannot test it. ^ permalink raw reply [flat|nested] 2+ messages in thread
[parent not found: <6dacd12e-19c1-4a11-9b38-70c07dca17d5n@googlegroups.com>]
* Re: Private message regarding: [syzbot] [fs?] KMSAN: kernel-infoleak-after-free in anon_pipe_read [not found] <6dacd12e-19c1-4a11-9b38-70c07dca17d5n@googlegroups.com> @ 2026-01-12 10:00 ` syzbot 0 siblings, 0 replies; 2+ messages in thread From: syzbot @ 2026-01-12 10:00 UTC (permalink / raw) To: kapoorarnav43; +Cc: kapoorarnav43, linux-kernel, syzkaller-bugs > From: Arnav Kapoor <kapoorarnav43@gmail.com> > Date: Sun, 12 Jan 2026 16:45:00 +0000 > Subject: [PATCH] mm/zswap: clear folio before decompression to prevent > infoleak > > #syz test > > KMSAN reported an infoleak in anon_pipe_read() where uninitialized memory > from a decompressed zswap page was copied to userspace: > > BUG: KMSAN: kernel-infoleak-after-free in anon_pipe_read+0x769/0x1e80 > Uninit was stored to memory at: > zswap_decompress+0x2bd/0x1000 mm/zswap.c:946 > Bytes 0-1023 of 1024 are uninitialized > > The issue occurs when zswap decompresses a page but the decompression > doesn't write a full PAGE_SIZE of data. The function zswap_decompress() > writes decompressed data directly into the folio without first clearing > it. If the decompressed size is less than PAGE_SIZE (which can happen > with certain compression algorithms or corrupted data), or if > decompression fails partway through, the remainder of the page contains > uninitialized memory. > > This uninitialized data can then: > 1. Be placed in pipe buffers when the page is used in splice operations > 2. Get copied to userspace via read() on the pipe > 3. Leak kernel memory contents to userspace > > The call chain observed: > zswap_load() > -> zswap_decompress() [writes partial data to folio] > -> [folio ends up in pipe buffer via shmem_file_splice_read] > -> anon_pipe_read() > -> copy_page_to_iter() [copies uninitialized tail to userspace] > > Fix this by clearing the entire folio before decompression. This ensures > that even if decompression writes less than PAGE_SIZE, or fails after > partial write, the remainder of the page contains zeros rather than > uninitialized memory. > > We use folio_zero_range() which is efficient as it can use optimized > memset implementations and handles compound pages correctly. > > Alternative approaches considered: > 1. Zero only the tail after decompression - more complex, requires > tracking actual bytes written, and doesn't help if decompression fails > 2. Check dlen and zero tail only when dlen < PAGE_SIZE - still leaves > a race if decompression fails after partial write > > The performance impact is minimal since: > - This is a relatively rare path (swap-in from zswap) > - Modern CPUs have efficient memory zeroing (often using cache-bypassing > instructions) > - The cost is much less than the decompression itself > > Reported-by: syzbot+175753aff92b396b1f30@syzkaller.appspotmail.com > Closes: https://syzkaller.appspot.com/bug?extid=175753aff92b396b1f30 > Fixes: 0ab0abcf5115 ("mm/zswap: remove the memcpy if acomp is not > sleepable") > Signed-off-by: Arnav Kapoor <kapoorarnav43@gmail.com> > --- > mm/zswap.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/mm/zswap.c b/mm/zswap.c > index 000000000000..111111111111 100644 > --- a/mm/zswap.c > +++ b/mm/zswap.c > @@ -932,6 +932,13 @@ static bool zswap_decompress(struct zswap_entry > *entry, struct folio *folio) > int decomp_ret = 0, dlen = PAGE_SIZE; > u8 *src, *obj; > > + /* > + * Clear the folio before decompression to prevent leaking uninitialized > + * memory to userspace if decompression writes less than PAGE_SIZE or > + * fails partway through. > + */ > + folio_zero_range(folio, 0, folio_size(folio)); > + > acomp_ctx = acomp_ctx_get_cpu_lock(pool); > obj = zs_obj_read_begin(pool->zs_pool, entry->handle, > acomp_ctx->buffer); > > -- > 2.43.0 > > On Monday, 12 January 2026 at 14:05:27 UTC+5:30 syzbot wrote: > > Hello, > > syzbot found the following issue on: > > HEAD commit: 7f98ab9da046 Merge tag 'for-6.19-rc4-tag' of git://git.ker.. > git tree: upstream > console output: https://syzkaller.appspot.com/x/log.txt?x=1334af92580000 > kernel config: https://syzkaller.appspot.com/x/.config?x=b3903bdf68407a14 > dashboard link: https://syzkaller.appspot.com/bug?extid=175753aff92b396b1f30 > compiler: Debian clang version 20.1.8 > (++20250708063551+0c9f909b7976-1~exp1~20250708183702.136), Debian LLD > 20.1.8 > userspace arch: i386 > > Unfortunately, I don't have any reproducer for this issue yet. > > Downloadable assets: > disk image: > https://storage.googleapis.com/syzbot-assets/c40942ffda39/disk-7f98ab9d.raw.xz > vmlinux: > https://storage.googleapis.com/syzbot-assets/63f72388d8d6/vmlinux-7f98ab9d.xz > kernel image: > https://storage.googleapis.com/syzbot-assets/751895685a54/bzImage-7f98ab9d.xz > > IMPORTANT: if you fix the issue, please add the following tag to the > commit: > Reported-by: syzbot+175753...@syzkaller.appspotmail.com > > ===================================================== > BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user > include/linux/instrumented.h:114 [inline] > BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter > lib/iov_iter.c:24 [inline] > BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf > include/linux/iov_iter.h:30 [inline] > BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 > include/linux/iov_iter.h:302 [inline] > BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance > include/linux/iov_iter.h:330 [inline] > BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0xef3/0x33f0 > lib/iov_iter.c:197 > instrument_copy_to_user include/linux/instrumented.h:114 [inline] > copy_to_user_iter lib/iov_iter.c:24 [inline] > iterate_ubuf include/linux/iov_iter.h:30 [inline] > iterate_and_advance2 include/linux/iov_iter.h:302 [inline] > iterate_and_advance include/linux/iov_iter.h:330 [inline] > _copy_to_iter+0xef3/0x33f0 lib/iov_iter.c:197 > copy_page_to_iter+0x482/0x910 lib/iov_iter.c:374 > anon_pipe_read+0x769/0x1e80 fs/pipe.c:343 > new_sync_read fs/read_write.c:491 [inline] > vfs_read+0x8ed/0xf90 fs/read_write.c:572 > ksys_read fs/read_write.c:715 [inline] > __do_sys_read fs/read_write.c:724 [inline] > __se_sys_read fs/read_write.c:722 [inline] > __ia32_sys_read+0x1f9/0x4d0 fs/read_write.c:722 > ia32_sys_call+0x191f/0x4340 arch/x86/include/generated/asm/syscalls_32.h:4 > do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] > __do_fast_syscall_32+0x154/0x320 arch/x86/entry/syscall_32.c:307 > do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:332 > do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:370 > entry_SYSENTER_compat_after_hwframe+0x84/0x8e > > Uninit was stored to memory at: > memcpy_to_folio include/linux/highmem.h:518 [inline] > zswap_decompress+0x2bd/0x1000 mm/zswap.c:946 > zswap_load+0x262/0x570 mm/zswap.c:1627 > swap_read_folio+0x662/0x3050 mm/page_io.c:637 > swap_cluster_readahead+0x725/0xb20 mm/swap_state.c:652 > shmem_swapin_cluster mm/shmem.c:1745 [inline] > shmem_swapin_folio+0x1fd9/0x3ee0 mm/shmem.c:2329 > shmem_get_folio_gfp+0x92a/0x1fc0 mm/shmem.c:2489 > shmem_get_folio mm/shmem.c:2662 [inline] > shmem_file_splice_read+0x350/0x11e0 mm/shmem.c:3567 > do_splice_read fs/splice.c:982 [inline] > splice_file_to_pipe+0x5b4/0x8f0 fs/splice.c:1292 > do_splice+0x29d8/0x30d0 fs/splice.c:1376 > __do_splice fs/splice.c:1433 [inline] > __do_sys_splice fs/splice.c:1636 [inline] > __se_sys_splice+0x549/0x8c0 fs/splice.c:1618 > __ia32_sys_splice+0x112/0x1a0 fs/splice.c:1618 > ia32_sys_call+0x31a6/0x4340 > arch/x86/include/generated/asm/syscalls_32.h:314 > do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] > __do_fast_syscall_32+0x154/0x320 arch/x86/entry/syscall_32.c:307 > do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:332 > do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:370 > entry_SYSENTER_compat_after_hwframe+0x84/0x8e > > Uninit was created at: > free_pages_prepare mm/page_alloc.c:1328 [inline] > free_unref_folios+0x26a/0x29a0 mm/page_alloc.c:3000 > folios_put_refs+0xaac/0xb10 mm/swap.c:1002 > folios_put include/linux/mm.h:1671 [inline] > __folio_batch_release+0xe1/0x100 mm/swap.c:1062 > folio_batch_release include/linux/pagevec.h:101 [inline] > shmem_undo_range+0x929/0x20c0 mm/shmem.c:1137 > shmem_truncate_range mm/shmem.c:1249 [inline] > shmem_evict_inode+0x22c/0xed0 mm/shmem.c:1379 > evict+0x6a9/0xca0 fs/inode.c:837 > iput_final fs/inode.c:1951 [inline] > iput+0xc6f/0x1070 fs/inode.c:2003 > do_unlinkat+0x58a/0xd80 fs/namei.c:5443 > __do_sys_unlink fs/namei.c:5474 [inline] > __se_sys_unlink fs/namei.c:5472 [inline] > __ia32_sys_unlink+0x70/0xa0 fs/namei.c:5472 > ia32_sys_call+0x1e4a/0x4340 arch/x86/include/generated/asm/syscalls_32.h:11 > do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] > __do_fast_syscall_32+0x154/0x320 arch/x86/entry/syscall_32.c:307 > do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:332 > do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:370 > entry_SYSENTER_compat_after_hwframe+0x84/0x8e > > Bytes 0-1023 of 1024 are uninitialized > Memory access of size 1024 starts at ffff8880731d2000 > Data copied to user address 0000000056912be0 > > CPU: 1 UID: 0 PID: 5779 Comm: syz-executor Tainted: G W syzkaller #0 > PREEMPT(none) > Tainted: [W]=WARN > Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS > Google 10/25/2025 > ===================================================== > > > --- > This report is generated by a bot. It may contain errors. > See https://goo.gl/tpsmEJ for more information about syzbot. > syzbot engineers can be reached at syzk...@googlegroups.com. > > syzbot will keep track of this issue. See: > https://goo.gl/tpsmEJ#status for how to communicate with syzbot. > > If the report is already addressed, let syzbot know by replying with: > #syz fix: exact-commit-title > > If you want to overwrite report's subsystems, reply with: > #syz set subsystems: new-subsystem > (See the list of subsystem names on the web dashboard) > > If the report is a duplicate of another one, reply with: > #syz dup: exact-subject-of-another-report > > If you want to undo deduplication, reply with: > #syz undup > Command #1: This crash does not have a reproducer. I cannot test it. ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-01-12 10:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <e3d876de-cee9-457c-bbde-648e3507ba63n@googlegroups.com>
2026-01-12 9:44 ` Private message regarding: [syzbot] [fs?] KMSAN: kernel-infoleak-after-free in anon_pipe_read syzbot
[not found] <6dacd12e-19c1-4a11-9b38-70c07dca17d5n@googlegroups.com>
2026-01-12 10:00 ` syzbot
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.