[PATCH 0/4] Bluetooth: fix hci_conn lookup RCU usage + holding refcounts

[PATCH 0/4] Bluetooth: fix hci_conn lookup RCU usage + holding refcounts

[Pauli Virtanen]

Resending parts of
https://lore.kernel.org/linux-bluetooth/cover.1762100290.git.pav@iki.fi/
plus additional hci_conn_params usage fix.

Pauli Virtanen (4):
  Bluetooth: hci_sync: extend conn_hash lookup RCU critical sections
  Bluetooth: mgmt: fix RCU use in unpair_device/disconnect_sync
  Bluetooth: mgmt: hold reference for hci_conn in mgmt_pending_cmds
  Bluetooth: hci_sync: hold hdev->lock for hci_conn_params lookups

 net/bluetooth/hci_sync.c | 61 ++++++++++++++++++++++++++++++++++++----
 net/bluetooth/mgmt.c     | 42 ++++++++++++++++++++++++---
 2 files changed, 93 insertions(+), 10 deletions(-)

-- 
2.55.0

[PATCH 1/4] Bluetooth: hci_sync: extend conn_hash lookup RCU critical sections

[Pauli Virtanen]

Using RCU-protected pointers outside the critical sections without
refcount is incorrect and may result to UAF.

Extend critical section to cover both hci_conn_hash lookup and use of
the returned conn.

Add surrounding rcu_read_lock() also when return value is not used, in
preparation for RCU lockdep requirement to hci_lookup_le_connect().

This avoids concurrent deletion of the conn before we are done
dereferencing it.

Fixes: 58ddd115fe063 ("Bluetooth: hci_conn: Fix not setting conn_timeout for Broadcast Receiver")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
---
 net/bluetooth/hci_sync.c | 41 +++++++++++++++++++++++++++++++++++++---
 1 file changed, 38 insertions(+), 3 deletions(-)

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index b096fca86bb5..a614bab77119 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -1028,14 +1028,19 @@ static int hci_set_random_addr_sync(struct hci_dev *hdev, bdaddr_t *rpa)
 	 * In this kind of scenario skip the update and let the random
 	 * address be updated at the next cycle.
 	 */
+	rcu_read_lock();
+
 	if (bacmp(&hdev->random_addr, BDADDR_ANY) &&
 	    (hci_dev_test_flag(hdev, HCI_LE_ADV) ||
 	    hci_lookup_le_connect(hdev))) {
 		bt_dev_dbg(hdev, "Deferring random address update");
 		hci_dev_set_flag(hdev, HCI_RPA_EXPIRED);
+		rcu_read_unlock();
 		return 0;
 	}
 
+	rcu_read_unlock();
+
 	return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_RANDOM_ADDR,
 				     6, rpa, HCI_CMD_TIMEOUT);
 }
@@ -2621,12 +2626,17 @@ static int hci_pause_addr_resolution(struct hci_dev *hdev)
 	/* Cannot disable addr resolution if scanning is enabled or
 	 * when initiating an LE connection.
 	 */
+	rcu_read_lock();
+
 	if (hci_dev_test_flag(hdev, HCI_LE_SCAN) ||
 	    hci_lookup_le_connect(hdev)) {
+		rcu_read_unlock();
 		bt_dev_err(hdev, "Command not allowed when scan/LE connect");
 		return -EPERM;
 	}
 
+	rcu_read_unlock();
+
 	/* Cannot disable addr resolution if advertising is enabled. */
 	err = hci_pause_advertising_sync(hdev);
 	if (err) {
@@ -2764,6 +2774,8 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 	if (hci_dev_test_flag(hdev, HCI_PA_SYNC)) {
 		struct hci_conn *conn;
 
+		rcu_read_lock();
+
 		conn = hci_conn_hash_lookup_create_pa_sync(hdev);
 		if (conn) {
 			struct conn_params pa;
@@ -2773,6 +2785,8 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 			bacpy(&pa.addr, &conn->dst);
 			pa.addr_type = conn->dst_type;
 
+			rcu_read_unlock();
+
 			/* Clear first since there could be addresses left
 			 * behind.
 			 */
@@ -2782,6 +2796,8 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 			err = hci_le_add_accept_list_sync(hdev, &pa,
 							  &num_entries);
 			goto done;
+		} else {
+			rcu_read_unlock();
 		}
 	}
 
@@ -2792,10 +2808,13 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 	 * the controller.
 	 */
 	list_for_each_entry_safe(b, t, &hdev->le_accept_list, list) {
-		if (hci_conn_hash_lookup_le(hdev, &b->bdaddr, b->bdaddr_type))
+		rcu_read_lock();
+
+		if (hci_conn_hash_lookup_le(hdev, &b->bdaddr, b->bdaddr_type)) {
+			rcu_read_unlock();
 			continue;
+		}
 
-		/* Pointers not dereferenced, no locks needed */
 		pend_conn = hci_pend_le_action_lookup(&hdev->pend_le_conns,
 						      &b->bdaddr,
 						      b->bdaddr_type);
@@ -2803,6 +2822,8 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev)
 							&b->bdaddr,
 							b->bdaddr_type);
 
+		rcu_read_unlock();
+
 		/* If the device is not likely to connect or report,
 		 * remove it from the acceptlist.
 		 */
@@ -2929,6 +2950,8 @@ static int hci_le_set_ext_scan_param_sync(struct hci_dev *hdev, u8 type,
 		if (sent) {
 			struct hci_conn *conn;
 
+			rcu_read_lock();
+
 			conn = hci_conn_hash_lookup_ba(hdev, PA_LINK,
 						       &sent->bdaddr);
 			if (conn) {
@@ -2953,8 +2976,12 @@ static int hci_le_set_ext_scan_param_sync(struct hci_dev *hdev, u8 type,
 					phy++;
 				}
 
+				rcu_read_unlock();
+
 				if (num_phy)
 					goto done;
+			} else {
+				rcu_read_unlock();
 			}
 		}
 	}
@@ -3205,12 +3232,16 @@ int hci_update_passive_scan_sync(struct hci_dev *hdev)
 		/* If there is at least one pending LE connection, we should
 		 * keep the background scan running.
 		 */
+		bool exists;
 
 		/* If controller is connecting, we should not start scanning
 		 * since some controllers are not able to scan and connect at
 		 * the same time.
 		 */
-		if (hci_lookup_le_connect(hdev))
+		rcu_read_lock();
+		exists = hci_lookup_le_connect(hdev);
+		rcu_read_unlock();
+		if (exists)
 			return 0;
 
 		bt_dev_dbg(hdev, "start background scanning");
@@ -3468,12 +3499,16 @@ int hci_update_scan_sync(struct hci_dev *hdev)
 	if (hdev->scanning_paused)
 		return 0;
 
+	rcu_read_lock();
+
 	if (hci_dev_test_flag(hdev, HCI_CONNECTABLE) ||
 	    disconnected_accept_list_entries(hdev))
 		scan = SCAN_PAGE;
 	else
 		scan = SCAN_DISABLED;
 
+	rcu_read_unlock();
+
 	if (hci_dev_test_flag(hdev, HCI_DISCOVERABLE))
 		scan |= SCAN_INQUIRY;
 
-- 
2.55.0

[PATCH 2/4] Bluetooth: mgmt: fix RCU use in unpair_device/disconnect_sync

[Pauli Virtanen]

Dereferencing RCU-protected pointers outside critical sections is
invalid and may lead to UAF.

Take RCU for hci_conn lookups.  Since hci_abort_conn() cannot be called
with RCU held, take refcount temporarily.

Fixes: 227a0cdf4a028 ("Bluetooth: MGMT: Fix not generating command complete for MGMT_OP_DISCONNECT")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
---
 net/bluetooth/mgmt.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index 733a4b70e10c..cfcb97badd02 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -3091,6 +3091,8 @@ static int unpair_device_sync(struct hci_dev *hdev, void *data)
 	struct mgmt_cp_unpair_device *cp = cmd->param;
 	struct hci_conn *conn;
 
+	rcu_read_lock();
+
 	if (cp->addr.type == BDADDR_BREDR)
 		conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK,
 					       &cp->addr.bdaddr);
@@ -3098,6 +3100,11 @@ static int unpair_device_sync(struct hci_dev *hdev, void *data)
 		conn = hci_conn_hash_lookup_le(hdev, &cp->addr.bdaddr,
 					       le_addr_type(cp->addr.type));
 
+	if (conn)
+		hci_conn_get(conn);
+
+	rcu_read_unlock();
+
 	if (!conn)
 		return 0;
 
@@ -3105,6 +3112,7 @@ static int unpair_device_sync(struct hci_dev *hdev, void *data)
 	 * will clean up the connection no matter the error.
 	 */
 	hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM);
+	hci_conn_put(conn);
 
 	return 0;
 }
@@ -3252,6 +3260,8 @@ static int disconnect_sync(struct hci_dev *hdev, void *data)
 	struct mgmt_cp_disconnect *cp = cmd->param;
 	struct hci_conn *conn;
 
+	rcu_read_lock();
+
 	if (cp->addr.type == BDADDR_BREDR)
 		conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK,
 					       &cp->addr.bdaddr);
@@ -3259,6 +3269,11 @@ static int disconnect_sync(struct hci_dev *hdev, void *data)
 		conn = hci_conn_hash_lookup_le(hdev, &cp->addr.bdaddr,
 					       le_addr_type(cp->addr.type));
 
+	if (conn)
+		hci_conn_get(conn);
+
+	rcu_read_unlock();
+
 	if (!conn)
 		return -ENOTCONN;
 
@@ -3266,6 +3281,7 @@ static int disconnect_sync(struct hci_dev *hdev, void *data)
 	 * will clean up the connection no matter the error.
 	 */
 	hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM);
+	hci_conn_put(conn);
 
 	return 0;
 }
-- 
2.55.0

[PATCH 3/4] Bluetooth: mgmt: hold reference for hci_conn in mgmt_pending_cmds

[Pauli Virtanen]

Dereferencing RCU-protected pointers outside critical sections is
invalid and may lead to UAF.  Use of hci_conn in hci_sync callbacks also
needs to hold refcount to avoid UAF.

Take appropriate locks for hci_conn lookups, and take refcount for
hci_conn pointers stored in mgmt_pending_cmd so that the pointer stays
valid.

When accessing conn->state, ensure hdev->lock is held to avoid data
race.

Fixes: 7b445e220db9 ("Bluetooth: MGMT: Fix holding hci_conn reference while command is queued")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
---
 net/bluetooth/mgmt.c | 26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
index cfcb97badd02..c33751b6fbea 100644
--- a/net/bluetooth/mgmt.c
+++ b/net/bluetooth/mgmt.c
@@ -7404,6 +7404,9 @@ static void get_conn_info_complete(struct hci_dev *hdev, void *data, int err)
 		rp.max_tx_power = HCI_TX_POWER_INVALID;
 	}
 
+	if (conn)
+		hci_conn_put(conn);
+
 	mgmt_cmd_complete(cmd->sk, cmd->hdev->id, MGMT_OP_GET_CONN_INFO, status,
 			  &rp, sizeof(rp));
 
@@ -7418,6 +7421,8 @@ static int get_conn_info_sync(struct hci_dev *hdev, void *data)
 	int err;
 	__le16   handle;
 
+	hci_dev_lock(hdev);
+
 	/* Make sure we are still connected */
 	if (cp->addr.type == BDADDR_BREDR)
 		conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK,
@@ -7425,12 +7430,16 @@ static int get_conn_info_sync(struct hci_dev *hdev, void *data)
 	else
 		conn = hci_conn_hash_lookup_ba(hdev, LE_LINK, &cp->addr.bdaddr);
 
-	if (!conn || conn->state != BT_CONNECTED)
+	if (!conn || conn->state != BT_CONNECTED) {
+		hci_dev_unlock(hdev);
 		return MGMT_STATUS_NOT_CONNECTED;
+	}
 
-	cmd->user_data = conn;
+	cmd->user_data = hci_conn_get(conn);
 	handle = cpu_to_le16(conn->handle);
 
+	hci_dev_unlock(hdev);
+
 	/* Refresh RSSI each time */
 	err = hci_read_rssi_sync(hdev, handle);
 
@@ -7564,6 +7573,9 @@ static void get_clock_info_complete(struct hci_dev *hdev, void *data, int err)
 	}
 
 complete:
+	if (conn)
+		hci_conn_put(conn);
+
 	mgmt_cmd_complete(cmd->sk, cmd->hdev->id, cmd->opcode, status, &rp,
 			  sizeof(rp));
 
@@ -7580,15 +7592,21 @@ static int get_clock_info_sync(struct hci_dev *hdev, void *data)
 	memset(&hci_cp, 0, sizeof(hci_cp));
 	hci_read_clock_sync(hdev, &hci_cp);
 
+	hci_dev_lock(hdev);
+
 	/* Make sure connection still exists */
 	conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &cp->addr.bdaddr);
-	if (!conn || conn->state != BT_CONNECTED)
+	if (!conn || conn->state != BT_CONNECTED) {
+		hci_dev_unlock(hdev);
 		return MGMT_STATUS_NOT_CONNECTED;
+	}
 
-	cmd->user_data = conn;
+	cmd->user_data = hci_conn_get(conn);
 	hci_cp.handle = cpu_to_le16(conn->handle);
 	hci_cp.which = 0x01; /* Piconet clock */
 
+	hci_dev_unlock(hdev);
+
 	return hci_read_clock_sync(hdev, &hci_cp);
 }
 
-- 
2.55.0

[PATCH 4/4] Bluetooth: hci_sync: hold hdev->lock for hci_conn_params lookups

[Pauli Virtanen]

hci_conn_params_lookup requires hdev->lock be held, otherwise the list
iteration or param access is not safe.

Hold hdev->lock for params lookups in hci_sync.

Fixes: c530569adc19 ("Bluetooth: hci_core: Introduce HCI_CONN_FLAG_PAST")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
---
 net/bluetooth/hci_sync.c | 20 +++++++++++++++++---
 1 file changed, 17 insertions(+), 3 deletions(-)

diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c
index a614bab77119..dfc4cdafe14b 100644
--- a/net/bluetooth/hci_sync.c
+++ b/net/bluetooth/hci_sync.c
@@ -6676,6 +6676,8 @@ static int hci_le_create_conn_sync(struct hci_dev *hdev, void *data)
 	if (!hci_dev_test_flag(hdev, HCI_LE_SIMULTANEOUS_ROLES))
 		hci_pause_advertising_sync(hdev);
 
+	hci_dev_lock(hdev);
+
 	params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
 	if (params) {
 		conn->le_conn_min_interval = params->conn_min_interval;
@@ -6689,6 +6691,8 @@ static int hci_le_create_conn_sync(struct hci_dev *hdev, void *data)
 		conn->le_supv_timeout = hdev->le_supv_timeout;
 	}
 
+	hci_dev_unlock(hdev);
+
 	/* If controller is scanning, we stop it since some controllers are
 	 * not able to scan and connect at the same time. Also set the
 	 * HCI_LE_SCAN_INTERRUPTED flag so that the command complete
@@ -7246,13 +7250,13 @@ static void create_pa_complete(struct hci_dev *hdev, void *data, int err)
 }
 
 static int hci_le_past_params_sync(struct hci_dev *hdev, struct hci_conn *conn,
-				   struct hci_conn *acl, struct bt_iso_qos *qos)
+				   u16 acl_handle, struct bt_iso_qos *qos)
 {
 	struct hci_cp_le_past_params cp;
 	int err;
 
 	memset(&cp, 0, sizeof(cp));
-	cp.handle = cpu_to_le16(acl->handle);
+	cp.handle = cpu_to_le16(acl_handle);
 	/* An HCI_LE_Periodic_Advertising_Sync_Transfer_Received event is sent
 	 * to the Host. HCI_LE_Periodic_Advertising_Report events will be
 	 * enabled with duplicate filtering enabled.
@@ -7317,16 +7321,26 @@ static int hci_le_pa_create_sync(struct hci_dev *hdev, void *data)
 	 * 2. Check if that HCI_CONN_FLAG_PAST has been set which indicates that
 	 *    user really intended to use PAST.
 	 */
+	hci_dev_lock(hdev);
+
 	le = hci_conn_hash_lookup_le(hdev, &conn->dst, conn->dst_type);
 	if (le) {
 		struct hci_conn_params *params;
+		u16 le_handle = le->handle;
 
 		params = hci_conn_params_lookup(hdev, &le->dst, le->dst_type);
 		if (params && params->flags & HCI_CONN_FLAG_PAST) {
-			err = hci_le_past_params_sync(hdev, conn, le, qos);
+			hci_dev_unlock(hdev);
+
+			err = hci_le_past_params_sync(hdev, conn, le_handle,
+						      qos);
 			if (!err)
 				goto done;
+		} else {
+			hci_dev_unlock(hdev);
 		}
+	} else {
+		hci_dev_unlock(hdev);
 	}
 
 	/* SID has not been set listen for HCI_EV_LE_EXT_ADV_REPORT to update
-- 
2.55.0

RE: Bluetooth: fix hci_conn lookup RCU usage + holding refcounts

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 2389 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1121810

---Test result---

Test Summary:
CheckPatch                    PASS      2.69 seconds
VerifyFixes                   PASS      0.11 seconds
VerifySignedoff               PASS      0.11 seconds
GitLint                       PASS      1.13 seconds
SubjectPrefix                 PASS      0.41 seconds
BuildKernel                   PASS      27.19 seconds
CheckAllWarning               PASS      29.07 seconds
CheckSparse                   PASS      28.22 seconds
BuildKernel32                 PASS      25.82 seconds
CheckKernelLLVM               SKIP      0.00 seconds
TestRunnerSetup               PASS      492.77 seconds
TestRunner_l2cap-tester       PASS      58.33 seconds
TestRunner_iso-tester         PASS      85.88 seconds
TestRunner_bnep-tester        PASS      18.66 seconds
TestRunner_mgmt-tester        FAIL      208.80 seconds
TestRunner_rfcomm-tester      PASS      24.69 seconds
TestRunner_sco-tester         PASS      31.95 seconds
TestRunner_ioctl-tester       PASS      25.39 seconds
TestRunner_mesh-tester        FAIL      25.87 seconds
TestRunner_smp-tester         PASS      23.08 seconds
TestRunner_userchan-tester    PASS      19.63 seconds
TestRunner_6lowpan-tester     PASS      22.07 seconds
IncrementalBuild              PASS      34.65 seconds

Details
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
Read Exp Feature - Success                           Failed       0.241 seconds
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0

Failed Test Cases
Mesh - Send cancel - 1                               Timed out    2.721 seconds
Mesh - Send cancel - 2                               Timed out    1.990 seconds


https://github.com/bluez/bluetooth-next/pull/400

---
Regards,
Linux Bluetooth

RE: Bluetooth: fix hci_conn lookup RCU usage + holding refcounts

[bluez.test.bot]

[-- Attachment #1: Type: text/plain, Size: 2583 bytes --]

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list.
This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1121912

---Test result---

Test Summary:
CheckPatch                    PASS      2.79 seconds
VerifyFixes                   PASS      0.12 seconds
VerifySignedoff               PASS      0.12 seconds
GitLint                       FAIL      2.28 seconds
SubjectPrefix                 PASS      0.47 seconds
BuildKernel                   PASS      25.45 seconds
CheckAllWarning               PASS      27.97 seconds
CheckSparse                   PASS      27.61 seconds
BuildKernel32                 PASS      25.65 seconds
CheckKernelLLVM               SKIP      0.00 seconds
TestRunnerSetup               PASS      463.78 seconds
TestRunner_l2cap-tester       PASS      58.97 seconds
TestRunner_iso-tester         PASS      79.59 seconds
TestRunner_bnep-tester        PASS      18.91 seconds
TestRunner_mgmt-tester        FAIL      214.01 seconds
TestRunner_rfcomm-tester      PASS      25.28 seconds
TestRunner_sco-tester         PASS      32.49 seconds
TestRunner_ioctl-tester       PASS      26.07 seconds
TestRunner_mesh-tester        FAIL      25.98 seconds
TestRunner_smp-tester         PASS      23.27 seconds
TestRunner_userchan-tester    PASS      20.07 seconds
TestRunner_6lowpan-tester     PASS      22.76 seconds
IncrementalBuild              PASS      34.18 seconds

Details
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
[v2,2/4] Bluetooth: mgmt: fix locking in unpair_device/disconnect_sync

16: B2 Line has trailing whitespace: "    "
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner
Output:
Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4

Failed Test Cases
Read Exp Feature - Success                           Failed       0.248 seconds
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner
Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0

Failed Test Cases
Mesh - Send cancel - 1                               Timed out    2.662 seconds
Mesh - Send cancel - 2                               Timed out    1.988 seconds


https://github.com/bluez/bluetooth-next/pull/401

---
Regards,
Linux Bluetooth