All of lore.kernel.org
 help / color / mirror / Atom feed
From: vnkgutta@codeaurora.org
To: Evan Green <evgreen@chromium.org>
Cc: robh@kernel.org, mchehab@kernel.org, linux-edac@vger.kernel.org,
	linux-kernel@vger.kernel.org, Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	robh+dt@kernel.org, mark.rutland@arm.com,
	devicetree@vger.kernel.org, tsoni@codeaurora.org,
	ckadabi@codeaurora.org, rishabhb@codeaurora.org, bp@alien8.de
Subject: Re: [PATCH v1 2/4] drivers: soc: Add support to register LLCC EDAC driver
Date: Fri, 10 Aug 2018 16:04:36 -0700	[thread overview]
Message-ID: <6ab4d15223aa4299b0c45613c3859255@codeaurora.org> (raw)
In-Reply-To: <CAE=gft4zc8vHt_O0dTomu=3zq-_ri52WnjH=F6BhyaNoybu2hQ@mail.gmail.com>

On 2018-08-10 10:21, Evan Green wrote:
> On Wed, Aug 1, 2018 at 1:33 PM Venkata Narendra Kumar Gutta
> <vnkgutta@codeaurora.org> wrote:
>> 
>> Cache error reporting controller is to detect and report single
>> and double bit errors on Last Level Cache Controller (LLCC) cache.
>> Add required support to register LLCC EDAC driver as platform driver,
>> from LLCC driver.
>> 
>> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
>> ---
>>  drivers/soc/qcom/llcc-slice.c      | 18 ++++++++++++++++--
>>  include/linux/soc/qcom/llcc-qcom.h |  2 ++
>>  2 files changed, 18 insertions(+), 2 deletions(-)
>> 
>> diff --git a/drivers/soc/qcom/llcc-slice.c 
>> b/drivers/soc/qcom/llcc-slice.c
>> index a63640d..09c8bb0 100644
>> --- a/drivers/soc/qcom/llcc-slice.c
>> +++ b/drivers/soc/qcom/llcc-slice.c
>> @@ -224,7 +224,7 @@ static int qcom_llcc_cfg_program(struct 
>> platform_device *pdev)
>>         u32 attr0_val;
>>         u32 max_cap_cacheline;
>>         u32 sz;
>> -       int ret;
>> +       int ret = 0;
>>         const struct llcc_slice_config *llcc_table;
>>         struct llcc_slice_desc desc;
>> 
>> @@ -282,6 +282,7 @@ int qcom_llcc_probe(struct platform_device *pdev,
>>         struct resource *llcc_banks_res, *llcc_bcast_res;
>>         void __iomem *llcc_banks_base, *llcc_bcast_base;
>>         int ret, i;
>> +       struct platform_device *llcc_edac;
>> 
>>         drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
>>         if (!drv_data)
>> @@ -341,6 +342,19 @@ int qcom_llcc_probe(struct platform_device *pdev,
>>         mutex_init(&drv_data->lock);
>>         platform_set_drvdata(pdev, drv_data);
>> 
>> -       return qcom_llcc_cfg_program(pdev);
>> +       ret = qcom_llcc_cfg_program(pdev);
>> +       if (ret)
>> +               return ret;
>> +
>> +       drv_data->ecc_irq = platform_get_irq(pdev, 0);
>> +       if (drv_data->ecc_irq >= 0) {
> 
> This condition will always be true for u32. See below...
That's true. I missed that.
> 
>> +               llcc_edac = platform_device_register_data(&pdev->dev,
>> +                                               "qcom_llcc_edac", -1, 
>> drv_data,
>> +                                               sizeof(*drv_data));
>> +               if (IS_ERR(llcc_edac))
>> +                       dev_err(dev, "Failed to register llcc edac 
>> driver\n");
>> +       }
>> +
>> +       return ret;
>>  }
>>  EXPORT_SYMBOL_GPL(qcom_llcc_probe);
>> diff --git a/include/linux/soc/qcom/llcc-qcom.h 
>> b/include/linux/soc/qcom/llcc-qcom.h
>> index c681e79..1a3bc25 100644
>> --- a/include/linux/soc/qcom/llcc-qcom.h
>> +++ b/include/linux/soc/qcom/llcc-qcom.h
>> @@ -78,6 +78,7 @@ struct llcc_slice_config {
>>   * @num_banks: Number of llcc banks
>>   * @bitmap: Bit map to track the active slice ids
>>   * @offsets: Pointer to the bank offsets array
>> + * @ecc_irq: interrupt for llcc cache error detection and reporting
>>   */
>>  struct llcc_drv_data {
>>         struct regmap *regmap;
>> @@ -89,6 +90,7 @@ struct llcc_drv_data {
>>         u32 num_banks;
>>         unsigned long *bitmap;
>>         u32 *offsets;
>> +       u32 ecc_irq;
> 
> The return type for platform_get_irq is int, so this should probably
> be int, or "unsigned", but then you'd need to fix your logic above.
I think we should keep that as int. I'll check on which one I'm supposed 
to use here and update in the next version.
> 
>>  };
>> 
>>  #if IS_ENABLED(CONFIG_QCOM_LLCC)
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>> 

WARNING: multiple messages have this Message-ID (diff)
From: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
To: Evan Green <evgreen@chromium.org>
Cc: robh@kernel.org, mchehab@kernel.org, linux-edac@vger.kernel.org,
	linux-kernel@vger.kernel.org, Andy Gross <andy.gross@linaro.org>,
	David Brown <david.brown@linaro.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	robh+dt@kernel.org, mark.rutland@arm.com,
	devicetree@vger.kernel.org, tsoni@codeaurora.org,
	ckadabi@codeaurora.org, rishabhb@codeaurora.org, bp@alien8.de
Subject: [v1,2/4] drivers: soc: Add support to register LLCC EDAC driver
Date: Fri, 10 Aug 2018 16:04:36 -0700	[thread overview]
Message-ID: <6ab4d15223aa4299b0c45613c3859255@codeaurora.org> (raw)

On 2018-08-10 10:21, Evan Green wrote:
> On Wed, Aug 1, 2018 at 1:33 PM Venkata Narendra Kumar Gutta
> <vnkgutta@codeaurora.org> wrote:
>> 
>> Cache error reporting controller is to detect and report single
>> and double bit errors on Last Level Cache Controller (LLCC) cache.
>> Add required support to register LLCC EDAC driver as platform driver,
>> from LLCC driver.
>> 
>> Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
>> ---
>>  drivers/soc/qcom/llcc-slice.c      | 18 ++++++++++++++++--
>>  include/linux/soc/qcom/llcc-qcom.h |  2 ++
>>  2 files changed, 18 insertions(+), 2 deletions(-)
>> 
>> diff --git a/drivers/soc/qcom/llcc-slice.c 
>> b/drivers/soc/qcom/llcc-slice.c
>> index a63640d..09c8bb0 100644
>> --- a/drivers/soc/qcom/llcc-slice.c
>> +++ b/drivers/soc/qcom/llcc-slice.c
>> @@ -224,7 +224,7 @@ static int qcom_llcc_cfg_program(struct 
>> platform_device *pdev)
>>         u32 attr0_val;
>>         u32 max_cap_cacheline;
>>         u32 sz;
>> -       int ret;
>> +       int ret = 0;
>>         const struct llcc_slice_config *llcc_table;
>>         struct llcc_slice_desc desc;
>> 
>> @@ -282,6 +282,7 @@ int qcom_llcc_probe(struct platform_device *pdev,
>>         struct resource *llcc_banks_res, *llcc_bcast_res;
>>         void __iomem *llcc_banks_base, *llcc_bcast_base;
>>         int ret, i;
>> +       struct platform_device *llcc_edac;
>> 
>>         drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL);
>>         if (!drv_data)
>> @@ -341,6 +342,19 @@ int qcom_llcc_probe(struct platform_device *pdev,
>>         mutex_init(&drv_data->lock);
>>         platform_set_drvdata(pdev, drv_data);
>> 
>> -       return qcom_llcc_cfg_program(pdev);
>> +       ret = qcom_llcc_cfg_program(pdev);
>> +       if (ret)
>> +               return ret;
>> +
>> +       drv_data->ecc_irq = platform_get_irq(pdev, 0);
>> +       if (drv_data->ecc_irq >= 0) {
> 
> This condition will always be true for u32. See below...
That's true. I missed that.
> 
>> +               llcc_edac = platform_device_register_data(&pdev->dev,
>> +                                               "qcom_llcc_edac", -1, 
>> drv_data,
>> +                                               sizeof(*drv_data));
>> +               if (IS_ERR(llcc_edac))
>> +                       dev_err(dev, "Failed to register llcc edac 
>> driver\n");
>> +       }
>> +
>> +       return ret;
>>  }
>>  EXPORT_SYMBOL_GPL(qcom_llcc_probe);
>> diff --git a/include/linux/soc/qcom/llcc-qcom.h 
>> b/include/linux/soc/qcom/llcc-qcom.h
>> index c681e79..1a3bc25 100644
>> --- a/include/linux/soc/qcom/llcc-qcom.h
>> +++ b/include/linux/soc/qcom/llcc-qcom.h
>> @@ -78,6 +78,7 @@ struct llcc_slice_config {
>>   * @num_banks: Number of llcc banks
>>   * @bitmap: Bit map to track the active slice ids
>>   * @offsets: Pointer to the bank offsets array
>> + * @ecc_irq: interrupt for llcc cache error detection and reporting
>>   */
>>  struct llcc_drv_data {
>>         struct regmap *regmap;
>> @@ -89,6 +90,7 @@ struct llcc_drv_data {
>>         u32 num_banks;
>>         unsigned long *bitmap;
>>         u32 *offsets;
>> +       u32 ecc_irq;
> 
> The return type for platform_get_irq is int, so this should probably
> be int, or "unsigned", but then you'd need to fix your logic above.
I think we should keep that as int. I'll check on which one I'm supposed 
to use here and update in the next version.
> 
>>  };
>> 
>>  #if IS_ENABLED(CONFIG_QCOM_LLCC)
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>>

  reply	other threads:[~2018-08-10 23:04 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-01 20:33 [PATCH v1 0/4] Add EDAC driver for QCOM SoCs Venkata Narendra Kumar Gutta
2018-08-01 20:33 ` [PATCH v1 1/4] drivers: soc: Add broadcast base for Last Level Cache Controller (LLCC) Venkata Narendra Kumar Gutta
2018-08-01 20:33   ` [v1,1/4] " Venkata Narendra Kumar Gutta
2018-08-01 20:33 ` [PATCH v1 2/4] drivers: soc: Add support to register LLCC EDAC driver Venkata Narendra Kumar Gutta
2018-08-01 20:33   ` [v1,2/4] " Venkata Narendra Kumar Gutta
2018-08-10 17:21   ` [PATCH v1 2/4] " Evan Green
2018-08-10 17:21     ` [v1,2/4] " Evan Green
2018-08-10 23:04     ` vnkgutta [this message]
2018-08-10 23:04       ` Venkata Narendra Kumar Gutta
2018-08-01 20:33 ` [PATCH v1 3/4] drivers: edac: Add EDAC driver support for QCOM SoCs Venkata Narendra Kumar Gutta
2018-08-01 20:33   ` [v1,3/4] " Venkata Narendra Kumar Gutta
2018-08-08 23:11   ` [PATCH v1 3/4] " vnkgutta
2018-08-08 23:11     ` [v1,3/4] " Venkata Narendra Kumar Gutta
2018-08-10  3:59   ` [PATCH v1 3/4] " Borislav Petkov
2018-08-10  3:59     ` [v1,3/4] " Borislav Petkov
2018-08-10 23:03     ` [PATCH v1 3/4] " vnkgutta
2018-08-10 23:03       ` [v1,3/4] " Venkata Narendra Kumar Gutta
2018-08-10 17:23   ` [PATCH v1 3/4] " Evan Green
2018-08-10 17:23     ` [v1,3/4] " Evan Green
2018-08-10 23:13     ` [PATCH v1 3/4] " vnkgutta
2018-08-10 23:13       ` [v1,3/4] " Venkata Narendra Kumar Gutta
2018-08-11  0:14       ` [PATCH v1 3/4] " Evan Green
2018-08-11  0:14         ` [v1,3/4] " Evan Green
2018-08-01 20:33 ` [PATCH v1 4/4] dt-bindigs: Update documentation of qcom,llcc Venkata Narendra Kumar Gutta
2018-08-01 20:33   ` [v1,4/4] " Venkata Narendra Kumar Gutta
2018-08-09 22:41   ` [PATCH v1 4/4] " Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6ab4d15223aa4299b0c45613c3859255@codeaurora.org \
    --to=vnkgutta@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bp@alien8.de \
    --cc=ckadabi@codeaurora.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=evgreen@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mchehab@kernel.org \
    --cc=rishabhb@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=tsoni@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.