[Bluez-users] DBT-120 and Siemens S65

[Bluez-users] DBT-120 and Siemens S65

[Adis Beglerovic]

Hi
Trying to connect my mobile phone and PC using blue tooth.

1.Added needed stuff in my kernel 2.6.11 on gentoo box.
When I plug inn my Dlink DBT-120 lights are ON and hcitools scan reports
this:
Scanning ...
       00:01:E3:3C:79:45       Bash
where bash is my mobile phone.
and link quality is -->hcitool lq 00:01:E3:3C:79:45
Link quality: 255

Does this means that blue tooth works?
2.How do I connect to devices?
3. What tools can use for file transfer ?

Thanks


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] DBT-120 and Siemens S65

[Marcel Holtmann]

Hi Adis,

> Trying to connect my mobile phone and PC using blue tooth.
> 
> 1.Added needed stuff in my kernel 2.6.11 on gentoo box.
> When I plug inn my Dlink DBT-120 lights are ON and hcitools scan reports
> this:
> Scanning ...
>        00:01:E3:3C:79:45       Bash
> where bash is my mobile phone.
> and link quality is -->hcitool lq 00:01:E3:3C:79:45
> Link quality: 255
> 
> Does this means that blue tooth works?

if "hciconfig -a" doesn't show any errors it is working.

> 2.How do I connect to devices?

This depends on what you wanna do, but in general you will setup a
RFCOMM connection with the "rfcomm" tool.

> 3. What tools can use for file transfer ?

The Gnome desktop and also KDE have some nice Bluetooth integration that
allows you to send and receive files.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] DBT-120 and Siemens S65

[Adis Beglerovic]

Well I get this output when I run hciconfig -a

Can't open HCI socket.: Address family not supported by protocol
What can I do to make that work?

Regarding KDE and GNOME.. I don't use any of them.
Is there a nice command tool for that? Tryed obexftp
but with no luck.

Thanks

On Sun, 06 Mar 2005 13:15:50 +0100, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi Adis,
> 
> > Trying to connect my mobile phone and PC using blue tooth.
> >
> > 1.Added needed stuff in my kernel 2.6.11 on gentoo box.
> > When I plug inn my Dlink DBT-120 lights are ON and hcitools scan reports
> > this:
> > Scanning ...
> >        00:01:E3:3C:79:45       Bash
> > where bash is my mobile phone.
> > and link quality is -->hcitool lq 00:01:E3:3C:79:45
> > Link quality: 255
> >
> > Does this means that blue tooth works?
> 
> if "hciconfig -a" doesn't show any errors it is working.
> 
> > 2.How do I connect to devices?
> 
> This depends on what you wanna do, but in general you will setup a
> RFCOMM connection with the "rfcomm" tool.
> 
> > 3. What tools can use for file transfer ?
> 
> The Gnome desktop and also KDE have some nice Bluetooth integration that
> allows you to send and receive files.
> 
> Regards
> 
> Marcel
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] DBT-120 and Siemens S65

[Marcel Holtmann]

Hi Adis,

> Well I get this output when I run hciconfig -a
> 
> Can't open HCI socket.: Address family not supported by protocol
> What can I do to make that work?

are you sure that the kernel modules bluetooth.ko and hci_usb.ko are
loaded?

> Regarding KDE and GNOME.. I don't use any of them.
> Is there a nice command tool for that? Tryed obexftp
> but with no luck.

The latest version of obexftp and an OpenOBEX library with Bluetooth
support should work.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] DBT-120 and Siemens S65

[Adis Beglerovic]

Thanks for fast answers

Just checkign stuff that was in kernel and everything seams OK.
I don't use modules everything is build inn!
Also when I start bluetooth I get :

/etc/init.d/bluetooth start
 * Starting Bluetooth...
 *     Starting hcid...                                                   [ ok ]
 *     Starting sdpd...                                                   [ ok ]
 *     Starting rfcomm...
Can't open RFCOMM control socket: Address family not supported by protoc  [ !! ]



On Sun, 06 Mar 2005 14:55:08 +0100, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi Adis,
> 
> > Well I get this output when I run hciconfig -a
> >
> > Can't open HCI socket.: Address family not supported by protocol
> > What can I do to make that work?
> 
> are you sure that the kernel modules bluetooth.ko and hci_usb.ko are
> loaded?
> 
> > Regarding KDE and GNOME.. I don't use any of them.
> > Is there a nice command tool for that? Tryed obexftp
> > but with no luck.
> 
> The latest version of obexftp and an OpenOBEX library with Bluetooth
> support should work.
> 
> Regards
> 
> Marcel
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] DBT-120 and Siemens S65

[Marcel Holtmann]

Hi Adis,

> Just checkign stuff that was in kernel and everything seams OK.
> I don't use modules everything is build inn!
> Also when I start bluetooth I get :
> 
> /etc/init.d/bluetooth start
>  * Starting Bluetooth...
>  *     Starting hcid...                                                   [ ok ]
>  *     Starting sdpd...                                                   [ ok ]
>  *     Starting rfcomm...
> Can't open RFCOMM control socket: Address family not supported by protoc  [ !! ]

make sure everything is compiled in correctly. Otherwise use modules.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] DBT-120 and Siemens S65

[Adis Beglerovic]

Was following this howto http://gentoo-wiki.com/HOWTO_The_host-to-host_Bluetooth
and stuff that was added are as following:Device Drivers  --->
  Networking Support  --->
    <*> Bluetooth subsystem support  --->
        <*> L2CAP protocol support
        <*> SCO links support
        <*> RFCOMM protocol support
            [*] RFCOMM TTY support
        <*> BNEP protocol support
            [*] Multicast filter support
            [*] Protocol filter support
              Bluetooth device drivers  --->
                <*> HCI USB driver
                    [*] SCO (voice) support
USB support  --->
   <*> Support for Host-side USB
   --- USB Host Controller Drivers
   <M> EHCI HCD (USB 2.0) support
   <M> OHCI HCD support
   <*> UHCI HCD (most Intel and VIA) support
   --- USB Device Class drivers
   <*> USB Audio support

Please tell me if this is wrong and.
You are also suggesting modules? Which one as a module ?
Can you point me to a howto that explains it ?

Thanks



On Sun, 06 Mar 2005 15:05:12 +0100, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi Adis,
> 
> > Just checkign stuff that was in kernel and everything seams OK.
> > I don't use modules everything is build inn!
> > Also when I start bluetooth I get :
> >
> > /etc/init.d/bluetooth start
> >  * Starting Bluetooth...
> >  *     Starting hcid...                                                   [ ok ]
> >  *     Starting sdpd...                                                   [ ok ]
> >  *     Starting rfcomm...
> > Can't open RFCOMM control socket: Address family not supported by protoc  [ !! ]
> 
> make sure everything is compiled in correctly. Otherwise use modules.
> 
> Regards
> 
> Marcel
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] DBT-120 and Siemens S65

[Marcel Holtmann]

Hi Adis,

> Was following this howto http://gentoo-wiki.com/HOWTO_The_host-to-host_Bluetooth
> and stuff that was added are as following:Device Drivers  --->
>   Networking Support  --->
>     <*> Bluetooth subsystem support  --->
>         <*> L2CAP protocol support
>         <*> SCO links support
>         <*> RFCOMM protocol support
>             [*] RFCOMM TTY support
>         <*> BNEP protocol support
>             [*] Multicast filter support
>             [*] Protocol filter support
>               Bluetooth device drivers  --->
>                 <*> HCI USB driver
>                     [*] SCO (voice) support
> USB support  --->
>    <*> Support for Host-side USB
>    --- USB Host Controller Drivers
>    <M> EHCI HCD (USB 2.0) support
>    <M> OHCI HCD support
>    <*> UHCI HCD (most Intel and VIA) support
>    --- USB Device Class drivers
>    <*> USB Audio support
> 
> Please tell me if this is wrong and.
> You are also suggesting modules? Which one as a module ?
> Can you point me to a howto that explains it ?

I never checked again, if Bluetooth built-in is still working. Most
people are using a full modular kernel and this includes Bluetooth as
well as USB.

Regards

Marcel




-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] DBT-120 and Siemens S65

[Adis Beglerovic]

Finaly I got great results with modules in kernel and now 
hcicionfig -a shows this:
hciconfig -a
hci0:   Type: USB
        BD Address: 00:11:95:6F:DE:D1 ACL MTU: 192:8  SCO MTU: 64:8
        UP RUNNING PSCAN ISCAN 
        RX bytes:1754 acl:38 sco:0 events:80 errors:0
        TX bytes:1007 acl:34 sco:0 commands:29 errors:0
        Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 
        Link policy: RSWITCH HOLD SNIFF PARK 
        Link mode: SLAVE ACCEPT 
        Name: 'BlueZ (0)'
        Class: 0x000100
        Service Classes: Unspecified
        Device Class: Computer, Uncategorized
        HCI Ver: 1.1 (0x1) HCI Rev: 0x20d LMP Ver: 1.1 (0x1) LMP Subver: 0x20d
        Manufacturer: Cambridge Silicon Radio (10)
But when I try to use obexftp I get to the part where it asks for pass
and pass is not good.
Where do I look for pass ? In /etc/bluetooth/pin ?
Thanks


On Sun, 06 Mar 2005 15:19:50 +0100, Marcel Holtmann <marcel@holtmann.org> wrote:
> Hi Adis,
> 
> > Was following this howto http://gentoo-wiki.com/HOWTO_The_host-to-host_Bluetooth
> > and stuff that was added are as following:Device Drivers  --->
> >   Networking Support  --->
> >     <*> Bluetooth subsystem support  --->
> >         <*> L2CAP protocol support
> >         <*> SCO links support
> >         <*> RFCOMM protocol support
> >             [*] RFCOMM TTY support
> >         <*> BNEP protocol support
> >             [*] Multicast filter support
> >             [*] Protocol filter support
> >               Bluetooth device drivers  --->
> >                 <*> HCI USB driver
> >                     [*] SCO (voice) support
> > USB support  --->
> >    <*> Support for Host-side USB
> >    --- USB Host Controller Drivers
> >    <M> EHCI HCD (USB 2.0) support
> >    <M> OHCI HCD support
> >    <*> UHCI HCD (most Intel and VIA) support
> >    --- USB Device Class drivers
> >    <*> USB Audio support
> >
> > Please tell me if this is wrong and.
> > You are also suggesting modules? Which one as a module ?
> > Can you point me to a howto that explains it ?
> 
> I never checked again, if Bluetooth built-in is still working. Most
> people are using a full modular kernel and this includes Bluetooth as
> well as USB.
> 
> Regards
> 
> Marcel
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] DBT-120 and Siemens S65

[Fredy P.]

Adis Beglerovic escribi=F3:
> Hi
> Trying to connect my mobile phone and PC using blue tooth.
>=20
> 1.Added needed stuff in my kernel 2.6.11 on gentoo box.
> When I plug inn my Dlink DBT-120 lights are ON and hcitools scan report=
s
> this:
> Scanning ...
>        00:01:E3:3C:79:45       Bash
> where bash is my mobile phone.
> and link quality is -->hcitool lq 00:01:E3:3C:79:45
> Link quality: 255
>=20
> Does this means that blue tooth works?
> 2.How do I connect to devices?
> 3. What tools can use for file transfer ?

see this link [http://el-directorio.org/index.php?title=3DT610:Transferen=
cia_de_Archivos] (is in=20
spanish but can help you) and you can compare your hcid.conf whit it:

options {
         autoinit yes;
         security auto;
         pairing multi;
         pin_helper /usr/bin/bluez-pin;
}
device {
         name "%h-%d";
         class 0x100;
         iscan enable;
         pscan enable;
         lm accept;
         lp rswitch,hold,sniff,park;
         #encrypt enable;
}






> Thanks
>=20
>=20
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users=
.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
>=20


--=20
Suerte and F.S.Fv.

ATT: Fredy P.
___________________________________________________
F.S.Fv. es acr=F3nimo de Free Software Forever
http://www.fsf.org/philosophy/free-sw.es.html

Normas b=E1sicas de comportamiento en el ciberespacio
http://www.netiqueta.org/


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] DBT-120 and Siemens S65

[Adis Beglerovic]

Hi all

Lets try again ... 
I have fully working bluetooth setup except
when I try to send files to my Siemens S65 with obexftp
It asks to type in pass for Bluez(0) and no mather what I type 
it just not giving me access. 
Pass in /etc/bluetooth/pin is 12345 and phonecode is the same.
Here is the out put what happends when I run :
 /usr/local/bin/obexftp -b 00:01:E3:3C:79:45 -B 5 -p wireless_script
Browsing 00:01:E3:3C:79:45 ...
Channel: 5
No custom transport
Connecting...bt: -1
failed: connect
Still trying to connect
Connecting...bt: -1
failed: connect
Still trying to connect
Connecting...bt: -1
failed: connect
Still trying to connect

After 3 tryes it stops.
Here is my hcdi.conf

# HCI daemon configuration file.
#
# $Id: hcid.conf,v 1.4 2004/04/29 20:14:21 holtmann Exp $
#

# HCId options
options {
        # Automatically initialize new devices
        autoinit yes;

        # Security Manager mode
        #   none - Security manager disabled
        #   auto - Use local PIN for incoming connections
        #   user - Always ask user for a PIN
        #
        security user;

        # Pairing mode
        #   none  - Pairing disabled
        #   multi - Allow pairing with already paired devices
        #   once  - Pair once and deny successive attempts
        pairing multi; # PIN helper
        pin_helper /usr/bin/bluepin;

        # D-Bus PIN helper
        #dbus_pin_helper;
}

# Default settings for HCI devices
device {
        # Local device name
        #   %d - device id
        #   %h - host name
        name "BlueZ (%d)";

        # Local device class
        class 0x100;

        # Default packet type
        #pkt_type DH1,DM1,HV1;
 # Inquiry and Page scan
        iscan enable; pscan enable;

        # Default link mode
        #   none   - no specific policy 
        #   accept - always accept incoming connections
        #   master - become master on incoming connections,
        #            deny role switch on outgoing connections
        #
        #lm accept,master;
        #
        lm accept;

        # Default link policy
        #   none    - no specific policy
        #   rswitch - allow role switch
        #   hold    - allow hold mode
        #   sniff   - allow sniff mode
        #   park    - allow park mode
 #
        #lp hold,sniff;
        #
        lp rswitch,hold,sniff,park;

        # Authentication and Encryption
        #auth enable;
        #encrypt enable;
}
------------------------------------------------------------------------------------------------------------



And this is my pin >>>> 12345



-----------------------------------------------------------------------------------------------------------
pin-helper file has this stuff 

#!/bin/sh
echo -n "PIN:"
cat /etc/bluetooth/pin
----------------------------------------------------------------------------------------------------------


---------------------------------------------------------------------------------------------------------------
And finaly rfcomm.conf
#
# RFCOMM configuration file.
#
# $Id: rfcomm.conf,v 1.1 2002/10/07 05:58:18 maxk Exp $
#

rfcomm0 {
        # Automatically bind the device at startup
        bind no;

        # Bluetooth address of the device
        device 11:22:33:44:55:66;

        # RFCOMM channel for the connection
        channel 1;

        # Description of the connection
        comment "Example Bluetooth device";
}
-----------------------------------------------------------------------------------------------


Need to get pass that password issue ....

Thanks


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users