All of lore.kernel.org
 help / color / mirror / Atom feed
From: syzbot <syzbot+fefa0af09f7891b1800e@syzkaller.appspotmail.com>
To: linux-kernel@vger.kernel.org, nenkov2004@gmail.com,
	 syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [block?] general protection fault in blk_mq_quiesce_queue
Date: Tue, 10 Nov 2026 11:07:03 -0800	[thread overview]
Message-ID: <6af36b57.17ff5aea.1b027f.019b.GAE@google.com> (raw)
In-Reply-To: <CAO7_G+zpXKbKY8ggsBsprzCw9M7NSvCyQ-f4KQSM8Etx6GEqKA@mail.gmail.com>

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

SYZFAIL: failed to recv rpc

SYZFAIL: failed to recv rpc
fd=3 want=4 recv=0 n=0 (errno 9: Bad file descriptor)
execution of simple program fails: NOTFAIL: arptable checkpoint: getsockopt(ARPT_SO_GET_ENTRIES) failed. table=filter (errno 22: Invalid argument).


Warning: Permanently added '[localhost]:6819' (ED25519) to the list of known hosts.
2026/11/10 19:04:41 parsed 1 programs
2026/11/10 19:04:41 serving rpc on tcp://42245
[   55.963375][ T5742] cgroup: Unknown subsys name 'net'
[   56.074706][ T5742] cgroup: Unknown subsys name 'cpuset'
[   56.080672][ T5742] cgroup: Unknown subsys name 'rlimit'
Setting up swapspace version 1, size = 127995904 bytes
[   57.409559][ T5742] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k 
[   59.695528][ T5753] br_netfilter no longer supported in user namespaces
[   59.875947][ T5753] soft_limit_in_bytes is deprecated and will be removed. Writing any value to this file has no effect. Please report your usecase to linux-mm@kvack.org if you depend on this functionality.
[   59.936142][ T5753] ebtables: xtables 32bit compat interface no longer supported in namespaces and will be removed soon.
[   59.936380][ T5753] arp_tables: xtables 32bit compat interface no longer supported in namespaces and will be removed soon.
[   59.936642][ T5753] ip_tables: xtables 32bit compat interface no longer supported in namespaces and will be removed soon.
[   59.936863][ T5753] ip6_tables: xtables 32bit compat interface no longer supported in namespaces and will be removed soon.
[   60.511799][ T5755] bridge0: port 1(bridge_slave_0) entered blocking state
[   60.512258][ T5755] bridge0: port 1(bridge_slave_0) entered disabled state
[   60.512367][ T5755] bridge_slave_0: entered allmulticast mode
[   60.513749][ T5755] bridge_slave_0: entered promiscuous mode
[   60.517106][ T5755] bridge0: port 2(bridge_slave_1) entered blocking state
[   60.517184][ T5755] bridge0: port 2(bridge_slave_1) entered disabled state
[   60.517279][ T5755] bridge_slave_1: entered allmulticast mode
[   60.518687][ T5755] bridge_slave_1: entered promiscuous mode
[   60.627709][ T5755] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   60.634100][ T5755] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   60.653715][ T5755] team0: Port device team_slave_0 added
[   60.655721][ T5755] team0: Port device team_slave_1 added
[   60.667483][ T5755] batman_adv: batadv0: Adding interface: batadv_slave_0
[   60.667493][ T5755] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   60.667507][ T5755] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   60.669146][ T5755] batman_adv: batadv0: Adding interface: batadv_slave_1
[   60.669154][ T5755] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   60.669168][ T5755] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   60.705286][ T5755] hsr_slave_0: entered promiscuous mode
[   60.706202][ T5755] hsr_slave_1: entered promiscuous mode
[   60.942218][   T38] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   60.942232][   T38] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   61.091172][   T57] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   61.091187][   T57] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   61.183299][ T5755] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   61.188345][ T5755] 8021q: adding VLAN 0 to HW filter on device netdevsim0
[   61.189037][ T5755] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   61.195751][ T5755] 8021q: adding VLAN 0 to HW filter on device netdevsim1
[   61.213344][ T5755] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   61.219620][ T5755] 8021q: adding VLAN 0 to HW filter on device netdevsim2
[   61.221457][ T5755] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   61.227586][ T5755] 8021q: adding VLAN 0 to HW filter on device netdevsim3
[   61.301564][   T65] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   61.303404][   T65] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   61.304783][   T65] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   61.309632][   T65] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   61.316544][   T65] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   61.412526][ T5755] 8021q: adding VLAN 0 to HW filter on device bond0
[   61.422578][ T5755] 8021q: adding VLAN 0 to HW filter on device team0
[   61.430476][   T57] bridge0: port 1(bridge_slave_0) entered blocking state
[   61.430588][   T57] bridge0: port 1(bridge_slave_0) entered forwarding state
[   61.437671][   T57] bridge0: port 2(bridge_slave_1) entered blocking state
[   61.437766][   T57] bridge0: port 2(bridge_slave_1) entered forwarding state
[   62.030796][ T5755] 8021q: adding VLAN 0 to HW filter on device batadv0
[   62.065809][ T5755] veth0_vlan: entered promiscuous mode
[   62.104328][ T5755] veth1_vlan: entered promiscuous mode
[   62.119783][ T5755] veth0_macvtap: entered promiscuous mode
[   62.123188][ T5755] veth1_macvtap: entered promiscuous mode
[   62.131833][ T5755] batman_adv: batadv0: Interface activated: batadv_slave_0
[   62.135888][ T5755] batman_adv: batadv0: Interface activated: batadv_slave_1
[   62.164634][ T5771] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   62.164916][ T5771] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   62.164938][ T5771] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   62.164958][ T5771] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   62.261207][   T14] netdevsim netdevsim3 netdevsim3 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
SYZFAIL: failed to recv rpc
fd=3 want=4 recv=0 n=0 (errno 9: Bad file descriptor)
execution of simple program fails: NOTFAIL: arptable checkpoint: getsockopt(ARPT_SO_GET_ENTRIES) failed. table=filter (errno 22: Invalid argument).
[   63.811497][   T14] netdevsim netdevsim3 netdevsim2 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   65.287829][   T14] netdevsim netdevsim3 netdevsim1 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   65.371984][   T14] netdevsim netdevsim3 netdevsim0 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   65.503178][   T14] bridge_slave_1: left allmulticast mode
[   65.503231][   T14] bridge_slave_1: left promiscuous mode
[   65.503831][   T14] bridge0: port 2(bridge_slave_1) entered disabled state
[   65.507795][   T14] bridge_slave_0: left allmulticast mode
[   65.507817][   T14] bridge_slave_0: left promiscuous mode
[   65.507980][   T14] bridge0: port 1(bridge_slave_0) entered disabled state
[   65.634809][   T14] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[   65.637628][   T14] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[   65.639515][   T14] bond0 (unregistering): Released all slaves
[   65.727181][   T14] hsr_slave_0: left promiscuous mode
[   65.728327][   T14] hsr_slave_1: left promiscuous mode
[   65.729104][   T14] batman_adv: batadv0: Interface deactivated: batadv_slave_0
[   65.729125][   T14] batman_adv: batadv0: Removing interface: batadv_slave_0
[   65.730246][   T14] batman_adv: batadv0: Interface deactivated: batadv_slave_1
[   65.730262][   T14] batman_adv: batadv0: Removing interface: batadv_slave_1
[   65.741743][   T14] veth1_macvtap: left promiscuous mode
[   65.741806][   T14] veth0_macvtap: left promiscuous mode
[   65.741943][   T14] veth1_vlan: left promiscuous mode
[   65.742076][   T14] veth0_vlan: left promiscuous mode
[   65.935455][   T14] team0 (unregistering): Port device team_slave_1 removed
[   65.945027][   T14] team0 (unregistering): Port device team_slave_0 removed
[   66.043375][ T5444] 8021q: adding VLAN 0 to HW filter on device eth2
[   66.242059][ T5444] 8021q: adding VLAN 0 to HW filter on device eth3
[   66.430099][ T5444] 8021q: adding VLAN 0 to HW filter on device eth4
[   66.642015][ T5444] 8021q: adding VLAN 0 to HW filter on device eth5
[   71.222149][ T1439] ieee802154 phy0 wpan0: encryption failed: -22
[   71.222242][ T1439] ieee802154 phy1 wpan1: encryption failed: -22


syzkaller build log:
go env (err=<nil>)
AR='ar'
CC='gcc'
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_ENABLED='1'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
CXX='g++'
GCCGO='gccgo'
GO111MODULE='auto'
GOAMD64='v1'
GOARCH='amd64'
GOAUTH='netrc'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOCACHEPROG=''
GODEBUG=''
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFIPS140='off'
GOFLAGS=''
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build845281019=/tmp/go-build -gno-record-gcc-switches'
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMOD='/syzkaller/jobs/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOMODCACHE='/syzkaller/jobs/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTELEMETRY='local'
GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.26.0'
GOWORK=''
PKG_CONFIG='pkg-config'

git status (err=<nil>)
HEAD detached at d2e5fb956a
nothing to commit, working tree clean


tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=d2e5fb956ad222b37a913979e04dc012f4868836 -X github.com/google/syzkaller/prog.gitRevisionDate=20260903-102143"  ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=d2e5fb956ad222b37a913979e04dc012f4868836 -X github.com/google/syzkaller/prog.gitRevisionDate=20260903-102143"  ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=d2e5fb956ad222b37a913979e04dc012f4868836 -X github.com/google/syzkaller/prog.gitRevisionDate=20260903-102143"  -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
mkdir -p ./bin/linux_386
x86_64-linux-gnu-g++ -o ./bin/linux_386/syz-executor executor/executor.cc \
	-m32 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -std=c++17 -I. -Iexecutor/_include   -DGOOS_linux=1 -DGOARCH_386=1 \
	-DHOSTGOOS_linux=1 -DGIT_REVISION=\"d2e5fb956ad222b37a913979e04dc012f4868836\"
/usr/bin/ld: /tmp/cc4F8CFT.o: in function `Connection::Connect(char const*, char const*)':
executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x145): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
./tools/check-syzos.sh 2>/dev/null
[INFO] Unsupported architecture '386', skipping check.



Tested on:

commit:         067c5c24 Merge tag 'page_alloc-for-7.4-rc2' of git://g..
git tree:       upstream
kernel config:  https://syzkaller.appspot.com/x/.config?x=c40cb9cd7a4b919a
dashboard link: https://syzkaller.appspot.com/bug?extid=fefa0af09f7891b1800e
compiler:       gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44
userspace arch: i386
patch:          https://syzkaller.appspot.com/x/patch.diff?x=1777944d580000


       reply	other threads:[~2026-11-10 19:07 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CAO7_G+zpXKbKY8ggsBsprzCw9M7NSvCyQ-f4KQSM8Etx6GEqKA@mail.gmail.com>
2026-11-10 19:07 ` syzbot [this message]
     [not found] <CAO7_G+yzCcvqn1+e0EtEk6=BxyK0yFEZPC7hVU7fma5zk-MnBA@mail.gmail.com>
2026-11-10 19:45 ` [syzbot] [block?] general protection fault in blk_mq_quiesce_queue syzbot
     [not found] <CAO7_G+yrCB_-fcq2Fh+pKgYmkd8a7RpCNh1jJgnJ30wHrUSQuQ@mail.gmail.com>
2026-11-10 19:32 ` syzbot
     [not found] <CAO7_G+zVhxDF7obCuC6gyTByFqw7G4fLrSKRRYxpdgt8B-iRig@mail.gmail.com>
2026-11-10 19:19 ` syzbot
2026-09-03 20:59 syzbot
2026-09-04  1:31 ` Edward Adam Davis
2026-09-04  1:57   ` syzbot
2026-09-04  2:38 ` Edward Adam Davis
2026-09-04  3:09   ` syzbot
2026-09-04  4:41 ` Edward Adam Davis
2026-09-04  5:05   ` syzbot
2026-09-04  9:10 ` Edward Adam Davis
2026-09-04  9:33   ` syzbot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6af36b57.17ff5aea.1b027f.019b.GAE@google.com \
    --to=syzbot+fefa0af09f7891b1800e@syzkaller.appspotmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nenkov2004@gmail.com \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.