* [moderation/CI] Re: mm, swap: extendable swap devices (xswap phase I)
@ 2026-11-12 2:14 syzbot ci
2026-11-12 7:24 ` Aleksandr Nogikh
0 siblings, 1 reply; 2+ messages in thread
From: syzbot ci @ 2026-11-12 2:14 UTC (permalink / raw)
To: syzkaller-upstream-moderation; +Cc: syzbot
syzbot ci has tested the following series
[v5] mm, swap: extendable swap devices (xswap phase I)
https://lore.kernel.org/all/20261109055455.536925-1-baoquan.he@linux.dev
* [PATCH v5 01/19] mm: xswap support for zswap
* [PATCH v5 02/19] mm, swap: refactor free_swap_cluster_info to take swap_info_struct
* [PATCH v5 03/19] mm, swap: add VM_SPARSE cluster-array helpers for xswap
* [PATCH v5 04/19] mm, swap: use a VM_SPARSE cluster array for xswap devices
* [PATCH v5 05/19] mm, swap: widen swap_info_struct max/pages to unsigned long
* [PATCH v5 06/19] mm, swap: add a sysfs interface to create xswap devices
* [PATCH v5 07/19] mm, swap: refactor swapoff and add xswap_destroy
* [PATCH v5 08/19] mm, swap: require zswap for xswap devices
* [PATCH v5 09/19] mm, swap: use a stable id for xswap devices
* [PATCH v5 10/19] mm, swap: let the command line set the xswap device size
* [PATCH v5 11/19] mm, swap: add CONFIG_XSWAP_DEFAULT_MAX
* [PATCH v5 12/19] mm, swap: let swapoff destroy xswap devices by name
* [PATCH v5 13/19] mm, swap: add xswap grow trigger on cluster allocation
* [PATCH v5 14/19] mm, swap: add debugfs counters for xswap
* [PATCH v5 15/19] mm, swap: make xswap cluster_info accesses RCU-safe
* [PATCH v5 16/19] mm, swap: prepare xswap_unmap_clusters for range shrinking
* [PATCH v5 17/19] mm, swap: add xswap shrink trigger and defer it to a workqueue
* [PATCH v5 18/19] mm, swap: do not give an xswap slot to a cgroup that cannot zswap
* [PATCH v5 19/19] mm, swap: skip the overcommit probe when removing xswap
and found the following issue:
BUG: unable to handle kernel paging request in swapoff
Full report is available here:
https://ci.syzbot.org/series/88bad2a7-a1dc-4686-80c1-647e34e90e37
***
BUG: unable to handle kernel paging request in swapoff
tree: mm-new
URL: https://kernel.googlesource.com/pub/scm/linux/kernel/git/akpm/mm.git
base: 2dc0136b1fdac153434ab02778fcdb32db5d0dae
arch: amd64
compiler: Debian clang version 22.1.8 (1~deb13u4), Debian LLD 22.1.8
config: https://ci.syzbot.org/builds/5c923c30-8b6d-49b4-8bbb-014cb85737f7/config
syz repro: https://ci.syzbot.org/findings/f14c26d8-d891-4444-9227-d55cbaf2adb7/syz_repro
BUG: unable to handle page fault for address: fffffffffffffffe
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD ff4b067 P4D ff4b067 PUD ff4d067 PMD 0
Oops: Oops: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 5894 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:__do_sys_swapoff mm/swapfile.c:3743 [inline]
RIP: 0010:__se_sys_swapoff+0x233/0x610 mm/swapfile.c:3719
Code: 99 90 ff e9 42 ff ff ff e8 2a 99 90 ff eb 6f 4c 89 e0 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 e7 e8 72 c7 08 00 4c 89 64 24 10 <4d> 8b 24 24 66 43 c7 44 2f 04 00 00 43 c6 44 2f 06 00 4c 89 3c 24
RSP: 0018:ffffc90003d1fde0 EFLAGS: 00010246
RAX: 1fffffffffffffff RBX: 0000200000000000 RCX: c8af1e162af39c00
RDX: 0000000000000000 RSI: fffffffffffffffe RDI: 00000000ffffff9c
RBP: ffffc90003d1fee0 R08: 0000000000000003 R09: 0000000000000000
R10: ffffc90003d1fd40 R11: fffff520007a3faa R12: fffffffffffffffe
R13: dffffc0000000000 R14: fffffffffffffffe R15: 1ffff920007a3fc0
FS: 00007f5ca62c96c0(0000) GS:ffff8882a7806000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffffffe CR3: 00000001023f4000 CR4: 00000000000006f0
Call Trace:
<TASK>
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5ca53a8f19
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5ca62c9028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a8
RAX: ffffffffffffffda RBX: 00007f5ca5625fa0 RCX: 00007f5ca53a8f19
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000200000000000
RBP: 00007f5ca5437f6d R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5ca5626038 R14: 00007f5ca5625fa0 R15: 00007ffce4301208
</TASK>
Modules linked in:
CR2: fffffffffffffffe
---[ end trace 0000000000000000 ]---
RIP: 0010:__do_sys_swapoff mm/swapfile.c:3743 [inline]
RIP: 0010:__se_sys_swapoff+0x233/0x610 mm/swapfile.c:3719
Code: 99 90 ff e9 42 ff ff ff e8 2a 99 90 ff eb 6f 4c 89 e0 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 e7 e8 72 c7 08 00 4c 89 64 24 10 <4d> 8b 24 24 66 43 c7 44 2f 04 00 00 43 c6 44 2f 06 00 4c 89 3c 24
RSP: 0018:ffffc90003d1fde0 EFLAGS: 00010246
RAX: 1fffffffffffffff RBX: 0000200000000000 RCX: c8af1e162af39c00
RDX: 0000000000000000 RSI: fffffffffffffffe RDI: 00000000ffffff9c
RBP: ffffc90003d1fee0 R08: 0000000000000003 R09: 0000000000000000
R10: ffffc90003d1fd40 R11: fffff520007a3faa R12: fffffffffffffffe
R13: dffffc0000000000 R14: fffffffffffffffe R15: 1ffff920007a3fc0
FS: 00007f5ca62c96c0(0000) GS:ffff8882a7806000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffffffffffffe CR3: 00000001023f4000 CR4: 00000000000006f0
----------------
Code disassembly (best guess), 3 bytes skipped:
0: e9 42 ff ff ff jmp 0xffffff47
5: e8 2a 99 90 ff call 0xff909934
a: eb 6f jmp 0x7b
c: 4c 89 e0 mov %r12,%rax
f: 48 c1 e8 03 shr $0x3,%rax
13: 42 80 3c 28 00 cmpb $0x0,(%rax,%r13,1)
18: 74 08 je 0x22
1a: 4c 89 e7 mov %r12,%rdi
1d: e8 72 c7 08 00 call 0x8c794
22: 4c 89 64 24 10 mov %r12,0x10(%rsp)
* 27: 4d 8b 24 24 mov (%r12),%r12 <-- trapping instruction
2b: 66 43 c7 44 2f 04 00 movw $0x0,0x4(%r15,%r13,1)
32: 00
33: 43 c6 44 2f 06 00 movb $0x0,0x6(%r15,%r13,1)
39: 4c 89 3c 24 mov %r15,(%rsp)
***
If these findings have caused you to resend the series or submit a
separate fix, please add the following tag to your commit message:
Tested-by: syzbot@syzkaller.appspotmail.com
---
This report is generated by a bot. It may contain errors.
syzbot ci engineers can be reached at syzkaller@googlegroups.com.
The email will later be sent to:
[akpm@linux-foundation.org baohua@kernel.org baoquan.he@linux.dev chengming.zhou@linux.dev chentao@kylinos.cn chrisl@kernel.org corbet@lwn.net david@kernel.org hannes@cmpxchg.org hebaoquan@kylinos.cn kasong@tencent.com klarasmodin@gmail.com kunwu.chan@gmail.com linux-kernel@vger.kernel.org linux-mm@kvack.org nphamcs@gmail.com youngjun.park@lge.com]
If the report looks fine to you, reply with:
#syz upstream
If the report is a false positive, reply with
#syz invalid
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [moderation/CI] Re: mm, swap: extendable swap devices (xswap phase I)
2026-11-12 2:14 [moderation/CI] Re: mm, swap: extendable swap devices (xswap phase I) syzbot ci
@ 2026-11-12 7:24 ` Aleksandr Nogikh
0 siblings, 0 replies; 2+ messages in thread
From: Aleksandr Nogikh @ 2026-11-12 7:24 UTC (permalink / raw)
To: syzbot ci; +Cc: syzkaller-upstream-moderation, syzbot
#syz upstream
On Thu, Nov 12, 2026 at 3:14 AM syzbot ci
<syzbot+ci959f1a5b24994e7e@syzkaller.appspotmail.com> wrote:
>
> syzbot ci has tested the following series
>
> [v5] mm, swap: extendable swap devices (xswap phase I)
> https://lore.kernel.org/all/20261109055455.536925-1-baoquan.he@linux.dev
> * [PATCH v5 01/19] mm: xswap support for zswap
> * [PATCH v5 02/19] mm, swap: refactor free_swap_cluster_info to take swap_info_struct
> * [PATCH v5 03/19] mm, swap: add VM_SPARSE cluster-array helpers for xswap
> * [PATCH v5 04/19] mm, swap: use a VM_SPARSE cluster array for xswap devices
> * [PATCH v5 05/19] mm, swap: widen swap_info_struct max/pages to unsigned long
> * [PATCH v5 06/19] mm, swap: add a sysfs interface to create xswap devices
> * [PATCH v5 07/19] mm, swap: refactor swapoff and add xswap_destroy
> * [PATCH v5 08/19] mm, swap: require zswap for xswap devices
> * [PATCH v5 09/19] mm, swap: use a stable id for xswap devices
> * [PATCH v5 10/19] mm, swap: let the command line set the xswap device size
> * [PATCH v5 11/19] mm, swap: add CONFIG_XSWAP_DEFAULT_MAX
> * [PATCH v5 12/19] mm, swap: let swapoff destroy xswap devices by name
> * [PATCH v5 13/19] mm, swap: add xswap grow trigger on cluster allocation
> * [PATCH v5 14/19] mm, swap: add debugfs counters for xswap
> * [PATCH v5 15/19] mm, swap: make xswap cluster_info accesses RCU-safe
> * [PATCH v5 16/19] mm, swap: prepare xswap_unmap_clusters for range shrinking
> * [PATCH v5 17/19] mm, swap: add xswap shrink trigger and defer it to a workqueue
> * [PATCH v5 18/19] mm, swap: do not give an xswap slot to a cgroup that cannot zswap
> * [PATCH v5 19/19] mm, swap: skip the overcommit probe when removing xswap
>
> and found the following issue:
> BUG: unable to handle kernel paging request in swapoff
>
> Full report is available here:
> https://ci.syzbot.org/series/88bad2a7-a1dc-4686-80c1-647e34e90e37
>
> ***
>
> BUG: unable to handle kernel paging request in swapoff
>
> tree: mm-new
> URL: https://kernel.googlesource.com/pub/scm/linux/kernel/git/akpm/mm.git
> base: 2dc0136b1fdac153434ab02778fcdb32db5d0dae
> arch: amd64
> compiler: Debian clang version 22.1.8 (1~deb13u4), Debian LLD 22.1.8
> config: https://ci.syzbot.org/builds/5c923c30-8b6d-49b4-8bbb-014cb85737f7/config
> syz repro: https://ci.syzbot.org/findings/f14c26d8-d891-4444-9227-d55cbaf2adb7/syz_repro
>
> BUG: unable to handle page fault for address: fffffffffffffffe
> #PF: supervisor read access in kernel mode
> #PF: error_code(0x0000) - not-present page
> PGD ff4b067 P4D ff4b067 PUD ff4d067 PMD 0
> Oops: Oops: 0000 [#1] SMP KASAN PTI
> CPU: 1 UID: 0 PID: 5894 Comm: syz.2.19 Not tainted syzkaller #0 PREEMPT(full)
> Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
> RIP: 0010:__do_sys_swapoff mm/swapfile.c:3743 [inline]
> RIP: 0010:__se_sys_swapoff+0x233/0x610 mm/swapfile.c:3719
> Code: 99 90 ff e9 42 ff ff ff e8 2a 99 90 ff eb 6f 4c 89 e0 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 e7 e8 72 c7 08 00 4c 89 64 24 10 <4d> 8b 24 24 66 43 c7 44 2f 04 00 00 43 c6 44 2f 06 00 4c 89 3c 24
> RSP: 0018:ffffc90003d1fde0 EFLAGS: 00010246
> RAX: 1fffffffffffffff RBX: 0000200000000000 RCX: c8af1e162af39c00
> RDX: 0000000000000000 RSI: fffffffffffffffe RDI: 00000000ffffff9c
> RBP: ffffc90003d1fee0 R08: 0000000000000003 R09: 0000000000000000
> R10: ffffc90003d1fd40 R11: fffff520007a3faa R12: fffffffffffffffe
> R13: dffffc0000000000 R14: fffffffffffffffe R15: 1ffff920007a3fc0
> FS: 00007f5ca62c96c0(0000) GS:ffff8882a7806000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: fffffffffffffffe CR3: 00000001023f4000 CR4: 00000000000006f0
> Call Trace:
> <TASK>
> do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
> do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
> entry_SYSCALL_64_after_hwframe+0x77/0x7f
> RIP: 0033:0x7f5ca53a8f19
> Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
> RSP: 002b:00007f5ca62c9028 EFLAGS: 00000246 ORIG_RAX: 00000000000000a8
> RAX: ffffffffffffffda RBX: 00007f5ca5625fa0 RCX: 00007f5ca53a8f19
> RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000200000000000
> RBP: 00007f5ca5437f6d R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
> R13: 00007f5ca5626038 R14: 00007f5ca5625fa0 R15: 00007ffce4301208
> </TASK>
> Modules linked in:
> CR2: fffffffffffffffe
> ---[ end trace 0000000000000000 ]---
> RIP: 0010:__do_sys_swapoff mm/swapfile.c:3743 [inline]
> RIP: 0010:__se_sys_swapoff+0x233/0x610 mm/swapfile.c:3719
> Code: 99 90 ff e9 42 ff ff ff e8 2a 99 90 ff eb 6f 4c 89 e0 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 e7 e8 72 c7 08 00 4c 89 64 24 10 <4d> 8b 24 24 66 43 c7 44 2f 04 00 00 43 c6 44 2f 06 00 4c 89 3c 24
> RSP: 0018:ffffc90003d1fde0 EFLAGS: 00010246
> RAX: 1fffffffffffffff RBX: 0000200000000000 RCX: c8af1e162af39c00
> RDX: 0000000000000000 RSI: fffffffffffffffe RDI: 00000000ffffff9c
> RBP: ffffc90003d1fee0 R08: 0000000000000003 R09: 0000000000000000
> R10: ffffc90003d1fd40 R11: fffff520007a3faa R12: fffffffffffffffe
> R13: dffffc0000000000 R14: fffffffffffffffe R15: 1ffff920007a3fc0
> FS: 00007f5ca62c96c0(0000) GS:ffff8882a7806000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: fffffffffffffffe CR3: 00000001023f4000 CR4: 00000000000006f0
> ----------------
> Code disassembly (best guess), 3 bytes skipped:
> 0: e9 42 ff ff ff jmp 0xffffff47
> 5: e8 2a 99 90 ff call 0xff909934
> a: eb 6f jmp 0x7b
> c: 4c 89 e0 mov %r12,%rax
> f: 48 c1 e8 03 shr $0x3,%rax
> 13: 42 80 3c 28 00 cmpb $0x0,(%rax,%r13,1)
> 18: 74 08 je 0x22
> 1a: 4c 89 e7 mov %r12,%rdi
> 1d: e8 72 c7 08 00 call 0x8c794
> 22: 4c 89 64 24 10 mov %r12,0x10(%rsp)
> * 27: 4d 8b 24 24 mov (%r12),%r12 <-- trapping instruction
> 2b: 66 43 c7 44 2f 04 00 movw $0x0,0x4(%r15,%r13,1)
> 32: 00
> 33: 43 c6 44 2f 06 00 movb $0x0,0x6(%r15,%r13,1)
> 39: 4c 89 3c 24 mov %r15,(%rsp)
>
>
> ***
>
> If these findings have caused you to resend the series or submit a
> separate fix, please add the following tag to your commit message:
> Tested-by: syzbot@syzkaller.appspotmail.com
>
> ---
> This report is generated by a bot. It may contain errors.
> syzbot ci engineers can be reached at syzkaller@googlegroups.com.
>
> The email will later be sent to:
> [akpm@linux-foundation.org baohua@kernel.org baoquan.he@linux.dev chengming.zhou@linux.dev chentao@kylinos.cn chrisl@kernel.org corbet@lwn.net david@kernel.org hannes@cmpxchg.org hebaoquan@kylinos.cn kasong@tencent.com klarasmodin@gmail.com kunwu.chan@gmail.com linux-kernel@vger.kernel.org linux-mm@kvack.org nphamcs@gmail.com youngjun.park@lge.com]
>
> If the report looks fine to you, reply with:
> #syz upstream
>
> If the report is a false positive, reply with
> #syz invalid
>
> --
> You received this message because you are subscribed to the Google Groups "syzkaller-upstream-moderation" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to syzkaller-upstream-moderation+unsubscribe@googlegroups.com.
> To view this discussion visit https://groups.google.com/d/msgid/syzkaller-upstream-moderation/6af520ef.4fb38a5b.96541.0002.GAE%40google.com.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-12 7:24 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-12 2:14 [moderation/CI] Re: mm, swap: extendable swap devices (xswap phase I) syzbot ci
2026-11-12 7:24 ` Aleksandr Nogikh
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.