Re: [PATCH v3 2/2] ARM: dts: tegra20: Add video decoder node

[Dmitry Osipenko <digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On 12.10.2017 11:49, Jon Hunter wrote:
> 
> On 11/10/17 21:08, Dmitry Osipenko wrote:
>> Add a device node for the video decoder engine found on Tegra20.
>>
>> Signed-off-by: Dmitry Osipenko <digetx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> ---
>>  arch/arm/boot/dts/tegra20.dtsi | 17 +++++++++++++++++
>>  1 file changed, 17 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
>> index 7c85f97f72ea..1b5d54b6c0cb 100644
>> --- a/arch/arm/boot/dts/tegra20.dtsi
>> +++ b/arch/arm/boot/dts/tegra20.dtsi
>> @@ -249,6 +249,23 @@
>>  		*/
>>  	};
>>  
>> +	vde@6001a000 {
>> +		compatible = "nvidia,tegra20-vde";
>> +		reg = <0x6001a000 0x3D00    /* VDE registers */
>> +		       0x40000400 0x3FC00>; /* IRAM region */
>> +		reg-names = "regs", "iram";
>> +		interrupts = <GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>, /* UCQ error interrupt */
>> +			     <GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>, /* Sync token interrupt */
>> +			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, /* BSE-V interrupt */
>> +			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, /* BSE-A interrupt */
>> +			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; /* SXE interrupt */
>> +		interrupt-names = "ucq-error", "sync-token", "bsev", "bsea", "sxe";
>> +		clocks = <&tegra_car TEGRA20_CLK_VDE>;
>> +		clock-names = "vde";
>> +		resets = <&tegra_car 61>;
>> +		reset-names = "vde";
>> +	};
>> +
> 
> I don't see any binding documentation for this node. We need to make
> sure we add this.
> 

It's in the first patch.

+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-vde.txt