[LARTC] Re: iproute2 rules not being followed !!!!!!!

[LARTC] Re: iproute2 rules not being followed !!!!!!!

[Shantanu Kumar]

Hi...

I m really very sorry...

actually I did a very stupid mistake...


in adding rules I added using  "from"  instead of  "to"   .... :)

I m really sorry for wasting all the time..

REgards 

Shantanu

On 7/17/05, Shantanu Kumar <shantanu.iitg@gmail.com> wrote:
> Hi...
> 
> I have installed ip route 2 package on Linux kernel 2.4.25
> 
> I am using 2 tables:
> 
> ###################################
> 
> ebox:100.254~# ip route list table ALTER
> default via 192.168.100.253 dev br0
> 
> ebox:100.254~# ip route list table main
> 10.0.0.254 dev ppp0  proto kernel  scope link  src 10.0.0.1
> 192.168.100.0/24 dev br0  proto kernel  scope link  src 192.168.100.254
> 192.168.100.0/24 dev eth1  proto kernel  scope link  src 192.168.100.233
> 192.168.200.0/24 dev eth2  proto kernel  scope link  src 192.168.200.254
> 127.0.0.0/8 dev lo  scope link
> default via 10.0.0.254 dev ppp0
> 
> 
> 
> #####################################
> 
> 
> Now I set up the rules :
> 
> #####################################
> 
> ebox:100.254~# ip rule list
> 0:      from all lookup local
> 7:      from 216.239.59.147 lookup main
> 8:      from 202.141.80.6 lookup ALTER
> 32739:  from 202.141.80.6 lookup ALTER
> 32740:  from 66.102.11.99 lookup ALTER
> 32741:  from 66.102.11.104 lookup main
> 32742:  from 64.73.37.225 lookup main
> 32743:  from 216.239.59.103 lookup main
> 32744:  from 210.43.44.8 lookup main
> 32745:  from 64.233.183.19 lookup main
> 32746:  from 64.233.183.83 lookup ALTER
> 32747:  from 64.233.183.106 lookup ALTER
> 32748:  from 210.157.158.37 lookup ALTER
> 32749:  from 66.249.87.99 lookup main
> 32752:  from 213.244.168.210 lookup main
> 32753:  from 66.197.129.37 lookup ALTER
> 32754:  from 82.102.4.72 lookup ALTER
> 32755:  from 216.73.82.14 lookup ALTER
> 32756:  from 216.73.82.70 lookup ALTER
> 32757:  from 216.74.132.11 lookup main
> 32758:  from 216.109.117.205 lookup ALTER
> 32759:  from 202.138.124.172 lookup main
> 32760:  from 216.109.127.16 lookup main
> 32761:  from 209.244.156.19 lookup ALTER
> 32762:  from 68.142.228.136 lookup ALTER
> 32763:  from 82.102.4.57 lookup ALTER
> 32765:  from 216.109.118.65 lookup main
> 32766:  from all lookup main
> 32767:  from all lookup default
> 
> 
> #####################################
> 
> 
> But when I try to trace the route of a packet with destination address
> such that according to ip rule table ALTER should be considered ...
> its not following the rule...  its always following table Main...
> 
> #####################################
> 
> ebox:100.254~# tcptraceroute -n 202.141.80.6
> Selected device ppp0, address 10.0.0.1, port 40113 for outgoing packets
> Tracing the path to 202.141.80.6 on TCP port 80 (http), 30 hops max
>  1  10.0.0.254  0.333 ms  0.212 ms  0.210 ms
>  2  202.141.80.6 [open]  0.589 ms  0.591 ms  0.588 ms
> 
> 
> ######################################
> 
> 
> 
> I would appreciate if I can get any help on why this is not working .!!!!
> 
> Thanks.
> 
> Regards
> Shantanu
>
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc