From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
Paul Elder <paul.elder@ideasonboard.com>
Cc: kieran.bingham@ideasonboard.com, tomi.valkeinen@ideasonboard.com,
umang.jain@ideasonboard.com,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Paul Elder <paul.elder@ideasonboard.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Tim Harvey <tharvey@gateworks.com>,
Philippe Schenker <philippe.schenker@toradex.com>,
Marek Vasut <marex@denx.de>,
Gregor Herburger <gregor.herburger@ew.tq-group.com>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
open list <linux-kernel@vger.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 2/2] arm64: dts: imx8mp: Add overlays for ISP instances
Date: Wed, 29 Nov 2023 11:20:07 +0100 [thread overview]
Message-ID: <7122934.GXAFRqVoOG@steina-w> (raw)
In-Reply-To: <20231129093113.255161-3-paul.elder@ideasonboard.com>
Hi Paul,
thanks for the patch.
Am Mittwoch, 29. November 2023, 10:31:13 CET schrieb Paul Elder:
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> Add two overlay to enable each ISP instance. The ISP is wired directly
> to the CSIS for now, bypassing the ISI completely.
I'm not sure if this is worth adding in a separate overlay.
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 2 ++
> .../arm64/boot/dts/freescale/imx8mp-isp1.dtso | 36 +++++++++++++++++++
> .../arm64/boot/dts/freescale/imx8mp-isp2.dtso | 36 +++++++++++++++++++
> 3 files changed, 74 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile
> b/arch/arm64/boot/dts/freescale/Makefile index 300049037eb0..f97dfac11189
> 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -113,6 +113,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-isp1.dtbo
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-isp2.dtbo
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> b/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso new file mode 100644
> index 000000000000..cf394ed224ab
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Ideas on Board Oy
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/media/video-interfaces.h>
> +
> +&isi_0 {
> + status = "disabled";
ISI is disabled by default. What is your intention here?
> +
> + ports {
> + port@0 {
> + /delete-node/ endpoint;
This doesn't work in overlays. See [1]. Otherwise the OF graph connections
look fine to me. I'm using the same in my local overlay.
Best regards,
Alexander
[1] https://lore.kernel.org/all/
CAMuHMdWu4KZbBkvEofUV2wuA1g2S=XHHM3RUN1cNrcZBkhsPZA@mail.gmail.com/
> + };
> + };
> +};
> +
> +&isp_0 {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + isp0_in: endpoint {
> + bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> + remote-endpoint = <&mipi_csi_0_out>;
> + };
> + };
> + };
> +};
> +
> +&mipi_csi_0_out {
> + remote-endpoint = <&isp0_in>;
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> b/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso new file mode 100644
> index 000000000000..14e2e7b2617f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Ideas on Board Oy
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/media/video-interfaces.h>
> +
> +&isi_0 {
> + status = "disabled";
> +
> + ports {
> + port@1 {
> + /delete-node/ endpoint;
> + };
> + };
> +};
> +
> +&isp_1 {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + isp1_in: endpoint {
> + bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> + remote-endpoint = <&mipi_csi_1_out>;
> + };
> + };
> + };
> +};
> +
> +&mipi_csi_1_out {
> + remote-endpoint = <&isp1_in>;
> +};
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
Paul Elder <paul.elder@ideasonboard.com>
Cc: kieran.bingham@ideasonboard.com, tomi.valkeinen@ideasonboard.com,
umang.jain@ideasonboard.com,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Paul Elder <paul.elder@ideasonboard.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Tim Harvey <tharvey@gateworks.com>,
Philippe Schenker <philippe.schenker@toradex.com>,
Marek Vasut <marex@denx.de>,
Gregor Herburger <gregor.herburger@ew.tq-group.com>,
Marcel Ziswiler <marcel.ziswiler@toradex.com>,
open list <linux-kernel@vger.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH 2/2] arm64: dts: imx8mp: Add overlays for ISP instances
Date: Wed, 29 Nov 2023 11:20:07 +0100 [thread overview]
Message-ID: <7122934.GXAFRqVoOG@steina-w> (raw)
In-Reply-To: <20231129093113.255161-3-paul.elder@ideasonboard.com>
Hi Paul,
thanks for the patch.
Am Mittwoch, 29. November 2023, 10:31:13 CET schrieb Paul Elder:
> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> Add two overlay to enable each ISP instance. The ISP is wired directly
> to the CSIS for now, bypassing the ISI completely.
I'm not sure if this is worth adding in a separate overlay.
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 2 ++
> .../arm64/boot/dts/freescale/imx8mp-isp1.dtso | 36 +++++++++++++++++++
> .../arm64/boot/dts/freescale/imx8mp-isp2.dtso | 36 +++++++++++++++++++
> 3 files changed, 74 insertions(+)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile
> b/arch/arm64/boot/dts/freescale/Makefile index 300049037eb0..f97dfac11189
> 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -113,6 +113,8 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-isp1.dtbo
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-isp2.dtbo
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> b/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso new file mode 100644
> index 000000000000..cf394ed224ab
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-isp1.dtso
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Ideas on Board Oy
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/media/video-interfaces.h>
> +
> +&isi_0 {
> + status = "disabled";
ISI is disabled by default. What is your intention here?
> +
> + ports {
> + port@0 {
> + /delete-node/ endpoint;
This doesn't work in overlays. See [1]. Otherwise the OF graph connections
look fine to me. I'm using the same in my local overlay.
Best regards,
Alexander
[1] https://lore.kernel.org/all/
CAMuHMdWu4KZbBkvEofUV2wuA1g2S=XHHM3RUN1cNrcZBkhsPZA@mail.gmail.com/
> + };
> + };
> +};
> +
> +&isp_0 {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + isp0_in: endpoint {
> + bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> + remote-endpoint = <&mipi_csi_0_out>;
> + };
> + };
> + };
> +};
> +
> +&mipi_csi_0_out {
> + remote-endpoint = <&isp0_in>;
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> b/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso new file mode 100644
> index 000000000000..14e2e7b2617f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-isp2.dtso
> @@ -0,0 +1,36 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2022 Ideas on Board Oy
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/media/video-interfaces.h>
> +
> +&isi_0 {
> + status = "disabled";
> +
> + ports {
> + port@1 {
> + /delete-node/ endpoint;
> + };
> + };
> +};
> +
> +&isp_1 {
> + status = "okay";
> +
> + ports {
> + port@1 {
> + isp1_in: endpoint {
> + bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
> + remote-endpoint = <&mipi_csi_1_out>;
> + };
> + };
> + };
> +};
> +
> +&mipi_csi_1_out {
> + remote-endpoint = <&isp1_in>;
> +};
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
next prev parent reply other threads:[~2023-11-29 10:20 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-29 9:31 [PATCH 0/2] arm64: dts: imx8mp: Add support for the ISPs Paul Elder
2023-11-29 9:31 ` [PATCH 1/2] arm64: dts: imx8mp: Add DT nodes for the two ISPs Paul Elder
2023-11-29 9:31 ` Paul Elder
2023-11-29 10:17 ` Alexander Stein
2023-11-29 10:17 ` Alexander Stein
2023-11-29 11:59 ` Fabio Estevam
2023-11-29 11:59 ` Fabio Estevam
2023-11-29 13:49 ` Adam Ford
2023-11-29 13:49 ` Adam Ford
2023-11-29 14:26 ` Fabio Estevam
2023-11-29 14:26 ` Fabio Estevam
2023-11-29 14:44 ` Laurent Pinchart
2023-11-29 14:44 ` Laurent Pinchart
2024-03-20 12:35 ` Adam Ford
2024-03-20 12:35 ` Adam Ford
2024-03-25 15:14 ` Laurent Pinchart
2024-03-25 15:14 ` Laurent Pinchart
2024-03-25 15:17 ` Adam Ford
2024-03-25 15:17 ` Adam Ford
2023-11-29 9:31 ` [PATCH 2/2] arm64: dts: imx8mp: Add overlays for ISP instances Paul Elder
2023-11-29 9:31 ` Paul Elder
2023-11-29 10:20 ` Alexander Stein [this message]
2023-11-29 10:20 ` Alexander Stein
2023-11-29 15:16 ` Laurent Pinchart
2023-11-29 15:16 ` Laurent Pinchart
2023-11-30 9:51 ` Alexander Stein
2023-11-30 9:51 ` Alexander Stein
2023-11-30 13:48 ` Adam Ford
2023-11-30 13:48 ` Adam Ford
2023-11-30 14:02 ` Kieran Bingham
2023-11-30 14:02 ` Kieran Bingham
2023-11-30 14:02 ` Kieran Bingham
2023-11-30 14:09 ` Adam Ford
2023-11-30 14:09 ` Adam Ford
2023-11-30 14:22 ` Alexander Stein
2023-11-30 14:22 ` Alexander Stein
2023-11-30 14:20 ` Laurent Pinchart
2023-11-30 14:20 ` Laurent Pinchart
2023-11-30 15:34 ` Alexander Stein
2023-11-30 15:34 ` Alexander Stein
2023-11-30 15:54 ` Laurent Pinchart
2023-11-30 15:54 ` Laurent Pinchart
2023-11-29 11:16 ` [PATCH 0/2] arm64: dts: imx8mp: Add support for the ISPs Tommaso Merciai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7122934.GXAFRqVoOG@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=gregor.herburger@ew.tq-group.com \
--cc=kernel@pengutronix.de \
--cc=kieran.bingham@ideasonboard.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=marex@denx.de \
--cc=paul.elder@ideasonboard.com \
--cc=philippe.schenker@toradex.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tharvey@gateworks.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=umang.jain@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.