All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: "Leonidas P. Papadakos"
	<papadakospan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Levin Du <djw-Efosm3t9Qi2Pt1CcHtbs0g@public.gmane.org>
Subject: Re: [PATCH] arm64: dts: rockchip: fix rk3328-roc-cc gmac2io stability issues
Date: Thu, 28 Feb 2019 21:30:59 +0100	[thread overview]
Message-ID: <7232986.0TGCi46shW@phil> (raw)
In-Reply-To: <20190228150129.28637-1-papadakospan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Hi,

Am Donnerstag, 28. Februar 2019, 16:01:29 CET schrieb Leonidas P. Papadakos:
> The rk3328-roc-cc board exhibits tx stability issues with large packets,
> as does the rock64 board, which was fixed with this patch
> https://patchwork.kernel.org/patch/10178969/
> 
> A similar patch was made for the rk3328-roc-cc here
> https://patchwork.kernel.org/patch/10804863/
> but it doesn't include the tx/rx fixes, and I fins that they
> help with an issue where large transfers would bring the ethernet
> link down, causing a reset.

as you can see in the reference patchwork entry, I already applied
that patch and it will be part of kernel 5.1.

So please base you works on top of that state (like the linux-next
for convenience) - i.e. your patch should not again try to add the
thres_dma_mode property, as it is now already present in the
devicetree.

Thanks
Heiko


> Signed-off-by: Leonidas P. Papadakos <papadakospan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> ---
>  arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
> index 99d0d9912950..0e34354b2092 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
> @@ -104,11 +104,12 @@
>  	phy-mode = "rgmii";
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&rgmiim1_pins>;
> +	snps,force_thresh_dma_mode;
>  	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
>  	snps,reset-active-low;
>  	snps,reset-delays-us = <0 10000 50000>;
> -	tx_delay = <0x25>;
> -	rx_delay = <0x11>;
> +	tx_delay = <0x24>;
> +	rx_delay = <0x18>;
>  	status = "okay";
>  };
>  
> 

  parent reply	other threads:[~2019-02-28 20:30 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-28 15:01 [PATCH] arm64: dts: rockchip: fix rk3328-roc-cc gmac2io stability issues Leonidas P. Papadakos
     [not found] ` <20190228150129.28637-1-papadakospan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-02-28 20:30   ` Heiko Stuebner [this message]
  -- strict thread matches above, loose matches on Subject: below --
2019-02-10 18:04 Peter Geis
     [not found] ` <20190210180439.380-1-pgwipeout-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-02-15  9:27   ` Heiko Stübner
2019-02-10 17:02 Peter Geis
     [not found] ` <20190210170214.12057-1-pgwipeout-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2019-02-10 17:55   ` Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7232986.0TGCi46shW@phil \
    --to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
    --cc=djw-Efosm3t9Qi2Pt1CcHtbs0g@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=papadakospan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.