* [PATCH] alloc_tag: expose profiling and compression states in /proc/allocinfo
@ 2026-07-29 22:49 Abhishek Bapat
2026-07-30 2:22 ` Hao Ge
0 siblings, 1 reply; 2+ messages in thread
From: Abhishek Bapat @ 2026-07-29 22:49 UTC (permalink / raw)
To: Suren Baghdasaryan, Andrew Morton, Hao Ge
Cc: linux-kernel, linux-mm, Abhishek Bapat
Currently, userspace has limited visibility into the exact active
runtime state of memory allocation profiling and its page extension
compression ('sysctl.vm.mem_profiling={0|1|never}[,compressed]').
While reading the sysctl provides basic on/off status, it is currently
impossible for userspace to natively determine whether page-tag
compression was successfully enabled without scraping dmesg boot logs.
Furthermore, since /proc/allocinfo remains in the procfs filesystem even
after profiling is dynamically disabled at runtime, simply checking for
the file's presence does not reliably indicate if the allocation
tracking hooks are actively running.
Resolve this ambiguity by appending the active state directly into the
header of /proc/allocinfo.
Signed-off-by: Abhishek Bapat <abhishekbapat@google.com>
---
mm/alloc_tag.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/mm/alloc_tag.c b/mm/alloc_tag.c
index 52aece27b00e..89ec2c6ce57a 100644
--- a/mm/alloc_tag.c
+++ b/mm/alloc_tag.c
@@ -108,7 +108,11 @@ static void allocinfo_stop(struct seq_file *m, void *arg)
static void print_allocinfo_header(struct seq_buf *buf)
{
/* Output format version, so we can change it. */
- seq_buf_printf(buf, "allocinfo - version: 2.0\n");
+ seq_buf_printf(buf, "allocinfo - version: 2.1\n");
+ seq_buf_printf(buf, "# Profiling: %s\n",
+ mem_alloc_profiling_enabled() ? "Enabled" : "Disabled");
+ seq_buf_printf(buf, "# Compression: %s\n",
+ static_key_enabled(&mem_profiling_compressed) ? "Enabled" : "Disabled");
seq_buf_printf(buf, "# <size> <calls> <tag info>\n");
}
base-commit: c73b725a57f276a3702ca213bde78fca029bc619
--
2.55.0.508.g3f0d502094-goog
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] alloc_tag: expose profiling and compression states in /proc/allocinfo
2026-07-29 22:49 [PATCH] alloc_tag: expose profiling and compression states in /proc/allocinfo Abhishek Bapat
@ 2026-07-30 2:22 ` Hao Ge
0 siblings, 0 replies; 2+ messages in thread
From: Hao Ge @ 2026-07-30 2:22 UTC (permalink / raw)
To: Abhishek Bapat; +Cc: linux-kernel, linux-mm, Suren Baghdasaryan, Andrew Morton
Hi Abhishek
Thanks for your patch.
On 2026/7/30 06:49, Abhishek Bapat wrote:
> Currently, userspace has limited visibility into the exact active
> runtime state of memory allocation profiling and its page extension
> compression ('sysctl.vm.mem_profiling={0|1|never}[,compressed]').
>
> While reading the sysctl provides basic on/off status, it is currently
> impossible for userspace to natively determine whether page-tag
> compression was successfully enabled without scraping dmesg boot logs.
> Furthermore, since /proc/allocinfo remains in the procfs filesystem even
> after profiling is dynamically disabled at runtime, simply checking for
> the file's presence does not reliably indicate if the allocation
> tracking hooks are actively running.
>
> Resolve this ambiguity by appending the active state directly into the
> header of /proc/allocinfo.
It's not obvious to me why userspace would need this state.
Suppose userspace reads mem_alloc_profiling_enabled as disabled, then
the profiling
gets enabled later. All allocations generated during that intermediate
window are lost.
When users later cat /proc/allocinfo and see the enabled state, will
they mistakenly take
the output as a complete, accurate record?
I'm also unclear what userspace would do with the compression state;
this is just an internal implementation detail of memory profiling.
Put another way, personally I'd prefer /proc/allocinfo to stay lean and
avoid exposing too many internal implementation details to userspace.
Unless users intend to dig deep into how memory profiling works, these
extra details
will likely only confuse them — most don't care about internals at all.
It's similar to how we use APIs: we only care about what an API achieves,
not its underlying implementation.
Could you share the concrete use cases for exposing these states to
userspace?
Thanks
Best Regards
Hao
> Signed-off-by: Abhishek Bapat <abhishekbapat@google.com>
> ---
> mm/alloc_tag.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/mm/alloc_tag.c b/mm/alloc_tag.c
> index 52aece27b00e..89ec2c6ce57a 100644
> --- a/mm/alloc_tag.c
> +++ b/mm/alloc_tag.c
> @@ -108,7 +108,11 @@ static void allocinfo_stop(struct seq_file *m, void *arg)
> static void print_allocinfo_header(struct seq_buf *buf)
> {
> /* Output format version, so we can change it. */
> - seq_buf_printf(buf, "allocinfo - version: 2.0\n");
> + seq_buf_printf(buf, "allocinfo - version: 2.1\n");
> + seq_buf_printf(buf, "# Profiling: %s\n",
> + mem_alloc_profiling_enabled() ? "Enabled" : "Disabled");
> + seq_buf_printf(buf, "# Compression: %s\n",
> + static_key_enabled(&mem_profiling_compressed) ? "Enabled" : "Disabled");
> seq_buf_printf(buf, "# <size> <calls> <tag info>\n");
> }
>
>
> base-commit: c73b725a57f276a3702ca213bde78fca029bc619
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-07-30 2:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-29 22:49 [PATCH] alloc_tag: expose profiling and compression states in /proc/allocinfo Abhishek Bapat
2026-07-30 2:22 ` Hao Ge
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.