Re: [PATCH v4 0/3] watchdog: dw_wdt: add reset lines

[Steffen Trumtrar <s.trumtrar@pengutronix.de>]

Steffen Trumtrar <s.trumtrar@pengutronix.de> writes:

> Hi!
>
> This series adds support for the reset line that is (potentially) holding
> the watchdog in reset.
>
> As the watchdog is useless if this happens, it needs to be deasserted in
> the probe function.
>
> Tested on a Socrates board.
>
> Regards,
> Steffen
>
>
> Changes since v3:
>
>   - goto out_disable_clk
>   - add Reviewed-by
>
> Changes since v2:
>
>   - use optional reset functions
>   - add Acked-by to devictree bindings
>
> Changes since v1:
>
>   - remove reset-names property
>   - remove warning if reset property is missing
>
> Steffen Trumtrar (3):
>   watchdog: bindings: dw_wdt: add reset lines
>   watchdog: dw_wdt: get reset lines from dt
>   ARM: socfpga: dtsi: add dw-wdt reset lines
>
>  Documentation/devicetree/bindings/watchdog/dw_wdt.txt |  3 +++
>  arch/arm/boot/dts/socfpga.dtsi                        |  2 ++
>  drivers/watchdog/dw_wdt.c                             | 11 +++++++++++
>  3 files changed, 16 insertions(+)
>
> base-commit: 2ea659a9ef488125eb46da6eb571de5eae5c43f6

Gentle Ping!

Is this series already applied somewhere I didn't look?


Best regards,
Steffen

-- 
Pengutronix e.K.                           | Steffen Trumtrar            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |