All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Kathpalia, Tanmay" <tanmay.kathpalia@altera.com>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-mmc@vger.kernel.org, ulf.hansson@linaro.org,
	Dinh Nguyen <dinguyen@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 5/9] arm64: dts: agilex5: add SOCDK eMMC daughter board support
Date: Thu, 2 Jul 2026 14:37:30 +0530	[thread overview]
Message-ID: <75f7416b-c75a-4785-a310-b3ce2638aa2d@altera.com> (raw)
In-Reply-To: <20260629-wild-dramatic-clam-80eb5c@quoll>


On 6/29/2026 12:37 PM, Krzysztof Kozlowski wrote:
> On Sat, Jun 27, 2026 at 01:14:50PM -0700, Tanmay Kathpalia wrote:
>> Add socfpga_agilex5_socdk_emmc.dts for the Agilex5 SoCDK eMMC daughter
>> board variant. Define board-specific regulators at the DTS root: a
>> fixed 3.3V supply for card power and a fixed 1.8V supply for eMMC I/O
>> voltage.
>>
>> Enable the shared SD/eMMC controller for eMMC-only operation with an
>> 8-bit bus, HS200 and HS400 modes at 1.8V signaling, and a 200 MHz
>> maximum clock frequency.
>>
>> Signed-off-by: Tanmay Kathpalia <tanmay.kathpalia@altera.com>
>> ---
>>   arch/arm64/boot/dts/intel/Makefile            |   1 +
>>   .../dts/intel/socfpga_agilex5_socdk_emmc.dts  | 120 ++++++++++++++++++
>>   2 files changed, 121 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex5_socdk_emmc.dts
>>
>> diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
>> index 33fcc55d0cb9..5bbbcfda1f48 100644
>> --- a/arch/arm64/boot/dts/intel/Makefile
>> +++ b/arch/arm64/boot/dts/intel/Makefile
>> @@ -8,5 +8,6 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
>>   				socfpga_agilex5_socdk_013b.dtb \
>>   				socfpga_agilex5_socdk_modular.dtb \
>>   				socfpga_agilex5_socdk_nand.dtb \
>> +				socfpga_agilex5_socdk_emmc.dtb \
> Same mistakes... Do not introduce random order.

Ack.

>
>

  reply	other threads:[~2026-07-02  9:07 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-27 20:14 [PATCH v2 0/9] mmc: sdhci-cadence: add SD6HC support and Agilex5 enablement Tanmay Kathpalia
2026-06-27 20:14 ` [PATCH v2 1/9] dt-bindings: reset: altr: add COMBOPHY_RESET for Agilex5 Tanmay Kathpalia
2026-07-02 15:53   ` (subset) " Philipp Zabel
2026-06-27 20:14 ` [PATCH v2 2/9] dt-bindings: mmc: cdns,sdhci: add SD6HC support and PHY properties Tanmay Kathpalia
2026-06-27 20:26   ` sashiko-bot
2026-06-28  9:46     ` Kathpalia, Tanmay
2026-06-29  7:04   ` Krzysztof Kozlowski
2026-07-02  8:58     ` Kathpalia, Tanmay
2026-06-27 20:14 ` [PATCH v2 3/9] arm64: dts: agilex5: add Cadence SD6HC controller and SOCDK enablement Tanmay Kathpalia
2026-06-27 20:24   ` sashiko-bot
2026-06-28  9:55     ` Kathpalia, Tanmay
2026-06-29  7:06   ` Krzysztof Kozlowski
2026-07-02  9:01     ` Kathpalia, Tanmay
2026-06-27 20:14 ` [PATCH v2 4/9] dt-bindings: arm: intel: add Agilex5 SOCDK eMMC board variant Tanmay Kathpalia
2026-06-29  7:06   ` Krzysztof Kozlowski
2026-07-02  9:07     ` Kathpalia, Tanmay
2026-06-27 20:14 ` [PATCH v2 5/9] arm64: dts: agilex5: add SOCDK eMMC daughter board support Tanmay Kathpalia
2026-06-29  7:07   ` Krzysztof Kozlowski
2026-07-02  9:07     ` Kathpalia, Tanmay [this message]
2026-06-27 20:14 ` [PATCH v2 6/9] mmc: sdhci-cadence: rename V4 functions for V6 controller groundwork Tanmay Kathpalia
2026-07-04 11:17   ` Adrian Hunter
2026-06-27 20:14 ` [PATCH v2 7/9] mmc: sdhci-cadence: refactor driver structure for V6 controller support Tanmay Kathpalia
2026-06-27 20:14 ` [PATCH v2 8/9] mmc: sdhci-cadence: add Cadence SD6HC support Tanmay Kathpalia
2026-07-04 11:18   ` Adrian Hunter
2026-06-27 20:14 ` [PATCH v2 9/9] mmc: sdhci-cadence: add Altera Agilex5 " Tanmay Kathpalia
2026-06-29  7:08   ` Krzysztof Kozlowski
2026-07-02  9:04     ` Kathpalia, Tanmay
2026-07-04 11:18   ` Adrian Hunter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=75f7416b-c75a-4785-a310-b3ce2638aa2d@altera.com \
    --to=tanmay.kathpalia@altera.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.